Refine by
Applications
- Samplers for Waste Water Treatment
- Heat transfer products solutions for the industrial process sector
- Combustion Technology for Sulphur & Sulphur Acid
- Combustion Technology for Alternative Combustibles
- Combustion Technology for Liquid Residue Incineration
- Combustion Technology for Exhaust Gas and Air Combustion
- Combustion Technology for Hot Gas Production
- LowNOx Systems for Nitrogenous Fuels
- Micro-irrigation systems for open field
- Micro-irrigation systems for greenhouse
- Turbulators for Gas Boilers
- Turbulators for Air Heaters
- Turbulators for Heat Exchangers
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Pasteurisation of Sludge Sector
- Heat Exchangers Solutions for Sewage Treatment Industry
- Heat Exchangers Solutions for for Waste Water Industry
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Biodiesel Industry
- Heat Exchangers Solutions for Palm Oil Sector
- Heat Exchangers Solutions for Fine Chemicals Sector
- Heat Exchangers Solutions for Solvent Sector
- Wind Power Solution for Preliminary Survey of Onshore and Offshore Wind Resources
- Wind Power Solution for Wind Power Prediction
- Industrial Agitators for Water Treatment Plants
- Industrial Agitators for Chemical Industry
- Heat Exchangers Solutions for Vegetables Industry
- Heat Exchangers Solutions for Fruit Industry
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for New Space Optics
- Measurements Solutions for Research
- Measurements Solutions for Semiconductor Industry
- Measurements Solutions for Start Up
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
- Meteorology Solution for Integrated Meteorological Observation and Service Platform
- Meteorology Solution for Wind Measurement Network in Complex Terrain
- Typical applications of the caloperm heat exchanger
- Environment Solution for Air Quality Improvement and Management in Key Regions
- Measurements Solutions for Aerospace
- Heating for schools
- Heating for industrial premises
- Agitation and mixing solutions for water and wastewater treatment.
- Agitation and mixing solutions for flue gas desulfurization
- Agitation and mixing solutions for corn wet milling
- Agitation and mixing solutions for oil & gas
- Agitation and mixing solutions for ethanol / bio diesel
- Agitation and mixing solutions for pulp & paper
- Agitation and mixing solutions for polymer / plastics
- Agitation and mixing solutions for chemical
- Agitation and mixing solutions for bio technology
- Agitation and mixing solutions for mineral processing
- Agitation and mixing solutions for general applications
- Piping & ducting solutions for the industrial industry
- Piping & ducting solutions for the power generation industry
- Heating for Agriculture
- Heat transfer products solutions for the commercial HVAC cooling sector
- Heat transfer products solutions for the industrial refrigeration sector
- Micro-irrigation systems for tree crops
- Irrigation solutions for Apple Crops
- Smoke generator device for hot fire training
- Smoke generator device for PPV & impulse ventilation testing
- Wastewater Treatment System for Commercial
- Wastewater Treatment System for Community & Multi-Family
- Wastewater Treatment System for Small Municipal
- Wastewater Treatment System for Residential & Single-Family
- Water Treatment System for Food and Drinking Water Applications
- Wind Lidar for Offshore construction and operations & maintenance wind monitoring
- Wind Lidar for Site Calibration to IEC 61400-12-1: 2017 Annex C
Turbulator Equipment & Supplies
2,207 equipment items found
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics 'see' the always present temperature and density variation in small parcels of air as they move through the infrared beam. OSI's patented LOA sensors are based on advanced technology tested ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
LOA-105 Optical Anemometer for Aluminum Plants is specially designed for superior performance in tough pot room environments. The sensor uses proven optical technology to measure the airflow velocity through the roof vents. The eye-safe LED transmitter and twin photodiode receiver are placed at either end of the pot room and simply need to "look" through the HF flow to measure the airflow. Its ...
Manufactured by:Magnation Water Technologies based inOakland, CALIFORNIA (USA)
Recognized as a Top Product of 2020 by Environment + Energy LEADER, Magnation’s patented Turbulator™ conditions, corrects and transforms previously unusable saline water and high TDS water to a soft, productive and energized state, and is a sound solution for reducing energy and water requirements. Designed with ultra-boosted top-grade magnetic resonators in addition ...
Manufactured by:Definitive Innovation based inBastiglia, ITALY
The MDN Series horizontal ribbon mixers with opposite coils are the simple and essential proposals for obtaining quickly a homogeneous and repeatable batch mixture even with small quantities of product. The clean structure of the mixer composed of U-section trough makes it easy to in- stall in addition to the application of a complete series of accessories such as injec- tors of liquid ...
Manufactured by:JD Turbulators B.V based inRaamsdonksveer, NETHERLANDS
A higher heat transfer-rate when more pressure drop is allowed. The efficiency+ turbulator is based on our proven left-right twisted tape design. Added is a corrugated surface and a shorter pitch, which results in a higher heat transfer-rate when more pressure drop is allowed. Efficiency + turbulators are the best solution for that last extra step of efficiency ...
Manufactured by:American Industrial Heat Transfer Inc. based inLa Crosse, VIRGINIA (USA)
Exclusive American Industrial Turbulators installed in every flow tube, increase heat transfer by more than 100%. American Industrial Turbulators eliminate the laminar flow condition normally associated with other smooth tube heat exchangers. High viscosity hydraulic and lubricating oils are easily cooled by this new state of the art ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Static mixers can significantly reduce the time required for mixing processes if the flow in the tube is turbulent. Special mixing elements are used here to form the vortex. Mixing and homogenisation take place in the downstream mixer tube. Two mixer designs have proved particularly successful in the last few years: the Aquamix slide-in mixer for installation in existing tubes ...
Manufactured by:Eisenmann Environmental Technology GmbH - Deurotech Group based inBöblingen, GERMANY
The high-turbulence reactor Turaktor is used especially for the thermal treatment of liquids, suspensions, pollutant gases and dusts. This process has proven itself in numerous applications. A very special and interested application is the regeneration of catalyst suspensions and the recovery of precious ...
Manufactured by:JD Turbulators B.V based inRaamsdonksveer, NETHERLANDS
The number one choice for extra efficiency and automatic cleaning of domestic biomass boilers. The combined spring turbulator from JD Turbulators consist of an outer spring responsible for fluepipe cleaning, and an inner part comprising a corrugated twisted tape that enhances heat transfer. Its innovation lies primarily in the corrugated twisted tape design and ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
Hydraulically switchable turbulators - rufflers, mounted into the baler filling shaft, are used by ANIS in the waste paper processing, to loosen up and spread equally heavy materials such as prepressed wastepaper or books. An additional, swivelling ruffler with a powerful, robust external drive loosens up compact heavy types of materials and makes it possible to produce ...
Manufactured by:Excellence Consultants based inNavi Mumbai, INDIA
The Turbulent Fluid Bed Dryer introduces an advanced design concept utilizing a Turbulent Mixer System combined with fluidized beds to enhance drying efficiency and effectiveness. This unique configuration continually agitates the bed contents with an agitator in addition to fluidization with air, preventing lump formation and eliminating the need for ...
Manufactured by:JD Turbulators B.V based inRaamsdonksveer, NETHERLANDS
The best ratio between pressure drop and heat transfer. The conventional turbulator of JD Turbulators is based on the left-right twisted tape design. This turbulator is known to have the best ratio between pressure drop and heat transfer improvement, which makes it the best solution when the amount of pressure drop allowed is limited. This ...
Manufactured by:MRV Systems, LLC based inSan Diego, CALIFORNIA (USA)
Working with Rockland Scientific, MRV developed the microALTO float as a version of our standard ALTO Argo float. The main addition is a Rockland MAPLe™ microstructure turbulence probe kit installed in the top-cap. The microALTO has the capacity for two different, or same, type probes to be installed - any combination of temperature or shear as pre-ordered by the ...
Manufactured by:Jain Irrigation, Inc based inFresno, CALIFORNIA (USA)
Growers are increasingly challenged to deliver high quality, uniform crops,while obtaining the greatest return on investments in water, labor, management and materials. Chapin Tape has helped lead the way to achieve these ...
Manufactured by:Antelco Corporation based inLongwood, FLORIDA (USA)
A sealed turbulent flow path dripper that provides consistent and uniform performance at an economical ...
Manufactured by:Bepex International LLC based inMinneapolis, MINNESOTA (USA)
The Flexwall Turbulizer bridges the gap between high-shear agglomeration and the need for a self-cleaning mixing operation. Using a consistently flexing mixing chamber, this technology can process materials that would otherwise build-up in static-bodied wet agglomeration processes. The Flexwall Turbulizer introduces enough energy into the material to create a ...
Manufactured by:E. Bachiller B, S.A. based inParets del Vallés, SPAIN
The Turbomix is a high-performance horizontal turbulence ploughshare blender for solids and powders ideal for intense and fast mixes, suitable for all types of products, including very disperse granulation and densities. Its high performance makes this horizontal mixer one of the most efficient pieces of equipment on the market. ...
by:Windmaster Technologies AS based inStavanger, NORWAY
RADAR turbulence and wind profiler for offshore and onshore wind park operations. Our specially designed radar units are easily retrofitted to wind towers near the base (both offshore and onshore). Several units working together make an Invisible Met Mast™, where we automatically analyse the forward-scattered radar signal to directly-measure 3D turbulence ...
Manufactured by:JD Turbulators B.V based inRaamsdonksveer, NETHERLANDS
The smooth spiral turbulator is based on a fully 360o twisted tape design with a smooth surface. For smooth twisted tapes a great variety of heat transfer and pressure drop correlations are available in the public domain ensuring application in a broad range of heat exchanger devices. ...