Refine by
Underground Pipe System Equipment & Supplies
35 equipment items found
Manufactured by:Funke Kunststoffe GmbH based inHamm-Uentrop, GERMANY
The CONNEX Sewer Pipe System DN/OD 315 – 800 (SDR 34, SN 8) comes with a complete range of fittings offering clients and civil engineering companies a real alternative to traditional materials in the sewer sector. With installation depths of 0.8 to 6.0 m and the installation pursuant to EN 1610, traffic loads of up to SLW 60 (HA20) are possible. The CONNEX Sewer Pipes are equipped with the ...
Manufactured by:Funke Kunststoffe GmbH based inHamm-Uentrop, GERMANY
The HS®-Underground Drainage Pipes System provides the user with a complete system which has excellent technical properties and is available from DN/OD 110 to DN/OD 800. Its main properties are high strength, high safety factor and easy installation. ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Model 352GF Hydrant Pit Valve is a Deadman operated on-off valve designed for use in aircraft refueling. It typically bolts to the terminus of an underground fuel delivery piping system and qualifies as the final shut-off device for such systems per NFPA ...
Manufactured by:Insul-Tek Piping Systems Inc. based inEast Syracuse, NEW YORK (USA)
Insul-Tek Dual-Con FRP is the ideal system for use on those sites that pose the most difficult of conditions for an underground preinsulated piping system. The FRP system provides “double protection” for your underground piping ...
Manufactured by:Reinert-Ritz GmbH based inNordhorn, GERMANY
The detachable push-fit coupler for absorption of axial movements in the pipe string. For non-underground pipe systems Reinert-Ritz offers, with the joining and expansion socket and the double joining socket, detachable push-fit couplers that are fully pressure-resistant thanks to the EPDM lip seal and are even designed for ...
Manufactured by:Insul-Pipe Systems based inBuda, TEXAS (USA)
The underground steam piping systems we engineer at Insul-Pipe Systems are designed to all ASHRAE standards and feature drainable/dryable Class A insulated or standard epoxy coated steel jacketed systems. Steam piping systems are pre-insulated with mineral wool ...
Manufactured by:Insul-Pipe Systems based inBuda, TEXAS (USA)
At Insul-Pipe Systems, we manufacture premium quality chilled water piping systems for a wide range of customers around the globe. Our custom engineered underground chilled water piping systems feature a closed cell polyurethane insulation, which provides the lowest thermal ...
Manufactured by:Formadrain Inc. based inMontreal, QUEBEC (CANADA)
Formapox 101 is a no-dig CIPP system that employs a durable, watertight composite material combined with a uniquely formulated resin to deliver effective underground pipe repair. The system features a thin blue liner, enabling it to adeptly handle diameters ranging from 2 to 48 inches without compromising flow capacity. Its ...
Manufactured by:Muhr GmbH based inBrannenburg, GERMANY
Now available at Muhr: the proven and qualitatively superior SUPERLIT GRP pipes. The pipes are used in underground and above surface piping systems for the following purposes: Potable water infrastructure. Underground and above ground applications. Pipe jacking for both new ...
Manufactured by:Torri based inCapriolo (BS), ITALY
The 'Big-Sizes' seals are specialized components used in polypropylene (PP) and polyethylene (PE) spiral pipes for underground drainage systems, water supply, and wastewater treatment, conforming to the European Standard EN 13476. These seals are engineered to meet specific customer requirements and are tailored to fit the precise seat of each ...
Manufactured by:C&B Piping, Inc. based inLeeds, ALABAMA (USA)
Mechanical Joint fittings are the industry standard for buried ductile iron piping systems. We stock MJ fittings in sizes 3” – 54” and both AWWA C153 and AWWA C110 specifications. We stock them as cement lined, glass lined, and Protecto 401 ...
Manufactured by:EasyCam, LLC based inNaples, FLORIDA (USA)
This feature allows users to efficiently maintain the camera, minimizing downtime and service costs. The camera is engineered for durability and optimal performance in inspecting sewer lines and underground pipes. It is equipped with advanced imaging capabilities that facilitate accurate inspections in varying environments. Suitable for both residential and ...
Manufactured by:Fiberdur GmbH & Co. KG based inAldenhoven, GERMANY
For the water distribution system and winter pipes in cooling towers Fiberdur developed a new GRP piping system “Flexidur” which could be used allowing a pressure resistance up to 6 bars and an angle-flexible connection up to 6 ...
Manufactured by:Techno-AC LLC based inKolomna, RUSSIA
DKI-117 sensor is used with cable locating receiver (AP-019 or AP027) for location of insulation damage in power cables, gas and heat pipes. Above all, operation of this sensor is based on the principle of voltage difference detection. Therefore, DKI sensor consists of two isolated from each other electrodes connected to the preamp in ...
Manufactured by:Motor Controls, Inc. (MCI) based inDallas, TEXAS (USA)
Motor Controls Inc. has been designing and manufacturing engineered control solutions since 1980. The company has been built on a foundation of meeting and exceeding our customer’s expectations. MCI’s custom manufacturing capabilities include structural, pipe and enclosure fabrication. Our advanced structural abilities coupled with our powder coat capabilities allows us to meet the ...
Manufactured by:U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. based inBirmingham, ALABAMA (USA)
TR FLEX Pipe and Fittings provide flexible restrained push-on joints for 4' through 36' Ductile Iron pipe and fittings. The TR FLEX Restrained Joint has a working pressure rating equivalent to the working pressure rating of the parent pipe, with a maximum restrained joint working pressure rating of 350 psi except that 30”-36” have a 100 psi reduction in joint rating for a given parent ...
Manufactured by:Aliaxis Deutschland GmbH based inMannheim, GERMANY
Long Couplers with integrated Mertik Maxitrol excess flow valve. FRIALONG long coupler with integrated SENTRY GS safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or drilling. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten material escape at the front and in ...
Manufactured by:Mannesmann Line Pipe GmbH based inSiegen, GERMANY
Complex and mostly buried pipe systems are required to ensure reliable supplies of heat energy over large distances. The medium pipes used for this application must meet high standards and withstand severe mechanical ...
Manufactured by:CE Projects Ltd based inMarket Drayton, UNITED KINGDOM
Flushing is the new way to cow health and hygiene, which has many benefits: Cows don't slip especially when bulling, Passages, tails, legs and udders are much cleaner and more hygienic, Expensive scrapers are eliminated, Flushing can take place with cows in shed, Less foot trouble, Less culling for the wrong ...
Manufactured by:Crumpler Plastic Pipe Inc. (CPPP) based in
CPP Corporation highlights the importance of proper connection points in buried pipe systems, focusing on components like catch basins, manholes, drain basins, and inlet drains. Historical issues at these junctions, irrespective of materials, emphasize the necessity of precautions, especially where traffic or soil drag-down is expected, or watertight joints are required. For surface ...