Refine by
Utility Flare Equipment & Supplies
63 equipment items found
Manufactured by:Encore Combustion based inAustin, TEXAS (USA)
Most common flare design. Include flame retention device(s) to maintain stable combustion. Used when waste vapor is inherently smokeless or for emergency relief scenarios. No assist method or utility requirement. To reduce purge gas usage, a purge seal is ...
Manufactured by:Parnel Biogas, Inc. based inGlenpool, OKLAHOMA (USA)
The solution to landfill gas control begins with the selection of a company that specializes in just that! At Parnel Biogas Inc. we are dedicated to providing you with a quality product and prompt response/service from sales thru fabrication, installation, start-up and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's utility flare design is an economical solution for emergency shut down (ESD) applications, compressor blowdowns, pigging, and cases where smoke emissions may not be a ...
Manufactured by:Zeeco, Inc. based inBroken Arrow, OKLAHOMA (USA)
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of ...
Manufactured by:Combustion Research Associates based inNoida, INDIA
Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. Our highly engineered Elevated Utility flares are designed to withstand extreme ...
Manufactured by:Europem N.V based inLier, BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Utility Aares are the most economical Aare solution for those applications that do not require smokeless capacity, or for those applications where the waste gas will burn smokeless without the need for smokeless Aare technology Utility Aare technology is commonly used for emergency release cases as a back-up in the event an upset condition occurs and the gas is directed to the ...
Manufactured by:MRW Technologies, Inc. based inGlenpool, OKLAHOMA (USA)
Whether your application has low pressure or high pressure, combustible or non-combustible gas, small or large flow, MRW can offer a solution. Our systems have proven successful worldwide in industries ranging from: Gas Processing, Oil & Gas Production, Midstream, Chemical & Petrochemical, Landfill, Petroleum Refining, Biogas/Biofuels, Steel & ...
Manufactured by:Encore Combustion based inAustin, TEXAS (USA)
Pre-engineered flare systems to reduce cost and improve delivery. Multiple flare sizes to suit the customer’s application. EPA OOOOa compliant. 40 CFR 60.18 compliant. 98%+ VOC destruction efficiency. Elevated flare with visible ...
Manufactured by:Prism Integrated Solutions Inc. based inForestburg, ALBERTA (CANADA)
Designed for gas well locations where high volumes of gas are blown down for maintenance reasons. The large integral base knockout ensures that condensates flowing from the well are contained in the knockout and not sprayed around causing a dangerous condition. These can be guy wire or self-supporting depending on available space and ...
Manufactured by:Prism Integrated Solutions Inc. based inForestburg, ALBERTA (CANADA)
Designed for compressor blow down, emergency pressure release and flows that contain any liquid content. Can be built as self support or guy wire support, based on available space on site, and they can be equipped with any ignition ...
Manufactured by:Prism Integrated Solutions Inc. based inForestburg, ALBERTA (CANADA)
Designed for small oil batteries and processes that do not generate water condensate. They do require a larger foot print area due to the guy wire support system and they can be equipped with any Prism ignition ...
Manufactured by:Prism Integrated Solutions Inc. based inForestburg, ALBERTA (CANADA)
Designed for compressor blow down, emergency pressure release and flows that do not contain any liquid content. This design works well in situations where space on the site is limited. Equip them with any ignition option. (Underground or above ground knockouts can be placed in front of ...
Manufactured by:Perennial Energy based inWest Plains, MONTANA (USA)
Perennial Energy specializes in the design and manufacturing of biogas processing systems and equipment, focusing on Utility Flare Systems and standalone Utility Flares. These flares feature a turndown ratio of up to 100:1, with an absolute minimum of 10 SCFM, optimized for landfill or digester gas destruction. ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
A utility flare stack is a fundamental type of open pipe flare used primarily for the combustion of waste gases. Its height is engineered to comply with safety regulations, ensuring proper dispersion of combustion products and minimizing ground level radiation, which is generally kept below 1500 BTU/hr/ft². The diameter is determined by the ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM Flare Systems are used for controlling Methane (CH4) and Carbon Dioxide (CO2), as by-products of Landfill Bio-degradation. PRM specializes in designing and manufacturing flares for landfill applications up to 10000 SCFM with destruction rates of up to 98% efficiency. Other markets include waste-water and agricultural ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
HERO Flare is a leading supplier for providing proven Air Assist technology to achieve smokeless capacities. Low pressure air is an excellent method for smoke free combustion of heavier gas streams. The flare gas and blower air flow coaxially to the flare tip where they mix. The blower air provides a significant portion of the stoichiometric air required for combustion and generates sufficient ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...