Refine by
Applications
- Filter solution for chlorine production - wet chlorine sector
- Filter solution for chlorine production - dry chlorine sector
- Filter solution for chlorine production - hydrogen stream sector
- Filter solution for NaOH stream duty sector
- Filter solution for phosphoric acid industry sector
- Filter solution for evaporator & scrubber exits sector
- Filter for Oil Refining - MEA Unit
- Filter for Oil Refining - Naptha Hydrotreater
- Filter for Gas Cleaning - Indirectly Heated Oven Fume Filtration System
- Removal of particles from gas/liquid for chemical processing industry
Vane Type Separator Equipment & Supplies
24 equipment items found
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
Munters DPV is a double pocket type vane type separator for service in high velocity and high liquid removal applications. It is part of Munters series of high performance vane type separators (DH5000 and DPV) with elevated K-values. Specially designed drain channels collect the ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DV Series droplet separators are a vane type separators. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas ...
Manufactured by:KingTool Company based inLongview, TEXAS (USA)
KingTool INLINE SEPARATORS are much like the conventional vane-type separators in that they do not require filter elements, but instead employ a KingTool Vane Mist Extractor. These separators are typically used for gas streams at small flow rates, have larger nozzles, and are ...
Manufactured by:ENSEPATEC based inWilmington, DELAWARE (USA)
The length is dictated by the internal diameter (ID), the gas volume flow and the required efficiency. The horizontal KO-drum accommodates internals such as inlet gas distributors, perforated plates, vane type separators and coalescing pads. The separator is split into 3 zones of different ...
Manufactured by:ENSEPATEC based inWilmington, DELAWARE (USA)
Air-borne salt laden droplets are too small (1µm to appr. 600µm) to be completely eliminated with a single stage system. For efficient protection against salt a minimum of 2 stages (vane type separator + coalescer / vane type separator + fine filter) is ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH Series droplet separators when assembled into units form a vane type separator for horizontal flow. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. The profile is available in various materials, the most popular being, talcum reinforced polypropylene, but ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DH 5000 (TS-5 series) droplet separator is a vane type separator for horizontal flow. The gas flow charged with liquid droplets is directed through eliminator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH 2500 droplet separator profile when assembled into units forms a vane type separator for horizontal flow design for the HVAC applications, especially for the installation behind cooling coils. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
Munters´ Ultra-Flow is a 3-stage vane type separator system for vertical gas flows with an integrated online cleaning system. Ultra-Flow has been designed as modular system to enable easy maintenance. A brand-new design with drainage system is developed for Ultra-Flow to remove liquid easily out of the gas flow. ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH™ 2100 droplet separator profile when assembled into units forms a vane type separator for horizontal flow specially design for the heating, ventilation and air conditioning applications. The streamlined profiles ensure low levels of pressure drop combined with high separation efficiencies. ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH 4300 droplet separator profile when assembled into units forms a vane type separator for horizontal flow. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. The profile is produced in talcum rein-forced polypropylene. It can therefore be utilised ...
Manufactured by:ENSEPATEC based inWilmington, DELAWARE (USA)
Ensepatec provides enhanced liquid/gas separation equipment for the safe and economical removal of liquid droplets from saturated steam inside a steam drum. The separation internals consist out of pre- and fine separation elements including axial and radial cyclones, flow distributors, vane type ...
Manufactured by:ENVIMAC Engineering GmbH based inOberhausen, GERMANY
Vane type separators are used to separate liquid droplets or dust from gas or vapour streams. They can be used at high gas or vapour velocities and allow high separation efficiency at low pressure drops. Vane type mist eliminators can be installed inside columns, evaporators and ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
DH™ 4200 droplet separator profile when assembled into units forms a vane type separator for horizontal flow specially design for the heating, ventilation and air conditioning applications. The streamlined profiles with multiple bends ensure high liquid loads combined with high separation efficiencies. ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto ...
Manufactured by:Kimre Inc. based inHomestead, FLORIDA (USA)
Mist elimination or “demisting” can be defined as the mechanical separation or removal of liquid droplets or mists from vapor streams. Failure to effectively capture these mists often leads to higher contaminant emissions, production losses, corrosion of downstream equipment, and increased maintenance. The most common mist elimination technologies utilized are chevron ...
Manufactured by:Begg Cousland Envirotec Limited based inGlasgow, UNITED KINGDOM
Chevron type vane packs are high velocity droplet separators. They can be specially designed for efficient droplet collection >8 microns in diameter, but traditionally they are used for more coarse droplet collection, 10 – 20 microns or larger. They also have a good resistance to blockage by solids due to their high voidage construction. ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a ...
Manufactured by:ENSEPATEC based inWilmington, DELAWARE (USA)
Ensepatec offers a broad selection of high performance separation internals for horizontal gas flows. These serve in a broad range of industrial, commercial and process ...
Manufactured by:Balcke-Durr GmbH based inDüsseldorf, GERMANY
As a pioneer of MSR technology since the beginning of nuclear power generation, with an experience of more than 50 years, we provide Moisture Separator Reheaters (MSR) and equipment for moisture separation for new builds, retrofits and power upgrades in the field of nuclear and solar thermal power plants of virtually any ...