Refine by
Wave Profiler Equipment & Supplies
37 equipment items found
Manufactured by:ASL Environmental Sciences based inVictoria, BRITISH COLUMBIA (CANADA)
A highly accurate upward-looking instrument for measuring waves at continental shelf depths. The Wave Profiler allows the user to measure non-directional wave parameters continuously for long periods of time with high temporal and spatial resolution in deeper water from the safety of an underwater mooring. The instrument is ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
Teledyne RD Instruments (TRDI) is continually committed to providing advanced technology solutions whilst maintaining the highest levels of service and support for our customers. To continue serving you with excellence, we periodically review our technology portfolio and challenge our engineers to focus on solving the challenges of tomorrow with innovative and robust technologies that you expect ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
With decades of experience in both ADCPs (Acoustic Doppler Current Profilers) and specifically phased array (flat-faced) transducer technology, Teledyne RDI remains the preeminent supplier of ADCP instrumentation for open ocean ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
Teledyne RD Instruments' Workhorse II Mariner Acoustic Doppler Current Profiler (ADCP) has become the instrument of choice for vessel-based researchers and commercial surveyors, whether working in coastal waters or in deeper waters where high resolution of surface layers is ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
With Pinnacle 45, TRDI continues its rightful place as the leader in deep water current profiling technology. Building upon the tremendous 20-year success of their industry-standard Long Ranger ADCP, the Pinnacle ADCP 45 carries the technology and capability to new heights, for both research and operational applications. Rated to a depth of 2000 m, the 45 kHz phased array Pinnacle ADCP delivers ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
The self-contained Workhorse II Sentinel ADCP is Teledyne RD Instruments' most popular and versatile acoustic Doppler current profiler (ADCP) configuration, boasting thousands of units in operation in over 50 countries around the ...
Manufactured by:Teledyne Technologies Incorporated based inThousand Oaks, CALIFORNIA (USA)
The Workhorse II Monitor is Teledyne RD Instruments most popular direct-reading Acoustic Doppler Current Profiler. The unit is typically bottom frame-mounted and hard-wired to shore to provide real-time monitoring of coastal currents. The Workhorse II Monitor's high data accuracy and reliability make it a favorite for deployments in high-volume traffic areas such as ports and harbors, where the ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Structured packings MASSdek are high-capacity fills for chemical and physical absorption, desorption and for bio scrubbers. In view of their excellent compression strengths, they are also well suited for bio trickling filters. Due to the special configuration of the fill, a uniform distribution of liquid is maintained under both high and low hydraulic ...
Premium
Manufactured by:Aanderaa, a Xylem Brand based inNesttun, NORWAY
The optimal solution to measure directional waves, currents and water quality in one instrument. The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler able to measure directional wave parameters and currents from a bottom mounted installation. The Acoustic Wave software 5759 used by the DCPS implements ...
Premium
Manufactured by:Aanderaa, a Xylem Brand based inNesttun, NORWAY
The acoustic based wave instrument, SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. The acoustic based wave SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. For ...
Manufactured by:Fastwave based inOsborne Park, AUSTRALIA
Fastwave and L-3 of Fremantle, Western Australia, have commenced a joint development project to enable near real-time data acquisition from networked subsea sensor arrays. L-3 is a world leader in the development of through water communication systems, with more than twenty years experience in the design of reliable undersea embedded software, electronics and housings for defence and oil and gas ...
Manufactured by:Nordson EFD based inWestlake, OHIO (USA)
The PICO Toµch controller’s intuitive touchscreen interface greatly simplifies setup and operation of the PICO Pµlse valve, while allowing precise adjustment of valve parameters. Fine-tune dispensing performance by setting ramp open and close parameters and stroke control from the unique Wave Profile screen. Adjust pulse time in increments as ...
Manufactured by:Tower Components, Inc.. A subsidary of Evapco Inc. based inTaneytown, MARYLAND (USA)
Opti-Wave drift eliminators have extruded PVC sine wave profiles 50 mm thick with reinforced upper and lower edges. This provides extra stiffness for long spans with minimum deflection. Spacers secure wave sections uniformly at 2-inch increments for increased stability and modules join together with an integral locking feature ...
Manufactured by:ATM Recyclingsystems GmbH based inFohnsdorf, AUSTRIA
All components of these three-stage presses that come into contact with the scrap are lined with high-strength wear plates featuring a specialized wave-like profile. Designed as robust welded constructions, these machines are suitable for heavy-duty continuous operation. Each machine can be operated manually or automatically. With visualization of all processes, ...
Manufactured by:HALO Maritime Defense Systems based inNewton, NEW HAMPSHIRE (USA)
TRITON is a high-visibility, heavy-duty maritime barrier designed to operate in the harshest [Off Shore and Near Shore] marine environments. This barrier has been designed, tested, and proven to operate in Sea State 7 (up to 11-meter ...
Manufactured by:Jiangsu Co-effort Mechanical & Electrical Technology Co.. Ltd. based inJiangyin - Wuxi City, CHINA
The whole line is controlled by PLC, LCD touch screen and man-machine interface. Realize the interaction between people and PLC. With change rollers, this machine can not only produce two wave guardrail, but also produce three wave guardrail and other metal protection ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international market. The seismic CPT system is used worldwide and features the following advantages: Seismic tests are ...
Manufactured by:ITB Climate based inBoxmeer, NETHERLANDS
Equally distributed light inside a livestock house will lead to improved spread of the animals. A regulated light scheme leads to better results inside the house. Dark periods in the building have an essiantial influence on the animals growth results. In order to minimize external light influences and to simulate day and night, ITB has lightfilters for chimneys, inlets and wall fans. The systems ...
Manufactured by:Krämer AG based inBassersdorf, SWITZERLAND
The KB7020 conveyor belt from Krämer AG is specifically engineered to meet international cGMP standards, ensuring high reliability and gentle handling of tablets and capsules. Its design facilitates the seamless transport of pharmaceutical products with care, minimizing the potential for damage. The conveyor system is characterized by its operational capacity of up to 3 cubic meters per ...
Manufactured by:ATM Recyclingsystems GmbH based inFohnsdorf, AUSTRIA
The baling presses of the SPD series are available in five sizes. Types 80-2 and 100-2 compress in two dimensions, while types 100-3 to 300-3 compact the material three-dimensionally. The initial compression is performed using a cutting lid, which enables pre-compaction and the shredding of bulky parts. All components that come into contact with the scrap are lined with high-strength wear plates ...