Refine by
Applications
- Water Pollution Control and Recovery Equipment for Oily Water Treatment
- Water Pollution Control and Recovery Equipment for Chemical Spills
- Water Pollution Control and Recovery Equipment for Sequential Batch Reactor (SBR) Plants
- Water Pollution Control and Recovery Equipment for Membrane Bio-Reactor (MBR) Plants
- Water Pollution Control and Recovery Equipment for Pre-Treatment Solutions
- Water Pollution Control and Recovery Equipment for Post-Treatment Solutions
Weir Gate Equipment & Supplies
52 equipment items found
Manufactured by:Dynamic Water Control Gates Inc. based inPointe-Claire, QUEBEC (CANADA)
Weir Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted ...
Manufactured by:Dynamic Water Control Gates Inc. based inPointe-Claire, QUEBEC (CANADA)
Weir Gates (Measurement Type) With Elastomer Seals. Dimensions Overall gate width up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted ...
Manufactured by:Rodney Hunt Company - VAG Valve and Gate Group based inOrange, MASSACHUSETTS (USA)
Weir gates are used to control the water level on one side of a gate and are characterized by opening downward to allow the flow of water over the top of the ...
Manufactured by:Fontaine-Aquanox based inSherbrooke, QUEBEC (CANADA)
The Fontaine-Aquanox SERIES 40 weir gate is used to control flows and level in different applications by opening downwards and allowing water flow over the stainless steel plate. The SERIES 40 sealing system design is similar to that of the SERIES ...
Manufactured by:Steinhardt GmbH Wassertechnik based inTaunusstein, GERMANY
The upper edge of the spillway dam is the maximum storage level with which the chargeable storage volume is determined. The overflow height h0 may not be taken into consideration. During utilisation of the Steinhardt weir gates the overflow height h0 may be utilised for determination of the chargeable storage ...
Manufactured by:Dynamic Water Control Gates Inc. based inPointe-Claire, QUEBEC (CANADA)
Weir Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted ...
Manufactured by:Waterman Industries of Egypt based inCairo, EGYPT
Weir gates are used in many water treatment plants to control/maintain the water level on one side of the gate. Weir gates are also referred to as downward opening slide gates as the slide is moved downwards to allow the flow of water over the top of the slide (weir ...
Manufactured by:Potential Engineering based inNavi Mumba, INDIA
Weir gate is used to control the flow and to isolate fluids associated with water, wastewater, sewage treatment plants, power generation, irrigation schemes, and process plants. The selection of the Weir gate in accordance with its duty is important to satisfy the design criteria and to provide the most cost-effective solution. ...
Manufactured by:Potential Engineering based inNavi Mumba, INDIA
Weir gate is used to control the flow and to isolate fluids associated with water, wastewater, sewage treatment plants, power generation, irrigation schemes, and process plants. The selection of the Weir gate in accordance with its duty is important to satisfy the design criteria and to provide the most cost-effective solution. ...
Manufactured by:GAH Global Ltd. based inGermasoyia, CYPRUS
Full Stainless Steel AISI 304 structure. The gate frame is screwed on the concrete for better water-tightness. The gate slides water-tight inside the gate frame. On the three ends a plastic rubber seal is embedded ensuring the best possible water-tightness. For the opening and closing of the gate and according to the size of the gate we use one or two hand driven rotating mechanism. The hand ...
Manufactured by:GAH Global Ltd. based inGermasoyia, CYPRUS
Manually or automatically operated with Auma gear Shut - Off gate from Stainless steel AISI 304 - For open channels. Full Stainless Steel AISI 304 structure. The gate frame is built in the concrete for better water-tightness. The gate slides water-tight inside the gate frame. On the three ends a plastic rubber seal is embedded ensuring the best possible water-tightness. For the opening and ...
Distributed by:Eco-Tech, Inc. based inCanton, GEORGIA (US) (USA)
All Coplastix sluice/slide/weir gates are built for dependable performance with special milled steel matrices that lend strength to the durable Coplastix doors. All contact faces are made from incompatible materials for minimum friction which contributes to manufacture a lighter gate that can be handled easier when manually operated and requires ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Materials and Construction: Frame, Slide and Reinforcing Members. Aluminum, ASTM B209 Alloy 6061. Stems - Stainless Steel, ASTM A276 Type 304 or 316. Fasteners - Stainless Steel, ASTM F593 Type 304 or 316. Rubber Seals - Neoprene, ASTM D2000. Guide Bars - Ultra High Molecular Weight Polyethylene, ASTM ...
Manufactured by:Plasti-Fab, Inc. based inTualatin, OREGON (USA)
The function of a down-opening weir gate is to control the upstream water level, and/or pace the amount of discharge from a water system. At times there will be a level control sensor in the system which is directly connected - controlling a modulating electric operator to automatically pace the amount of flow discharged and/or maintain a constant upstream water ...
Manufactured by:Golden Harvest, Inc. based inBurlington, WASHINGTON (USA)
Golden Harvest Inc. offers the GH 60 Aluminum and GH-66 Stainless Steel Weir Gates, engineered to manage upstream water levels effectively. These weir gates are designed with a downward-opening mechanism, similar to slide gates, but with an outflow that weirs over the top, allowing for a rough ...
Manufactured by:Northcoast Valve & Gate, Inc. based inMentor, OHIO (USA)
Materials and Construction: Frame, Slide and Reinforcing Members. Stainless Steel, ASTM A276 Type 304 or 316. Stems - Stainless Steel, ASTM A276 Type 304 or 316. Fasteners - Stainless Steel, ASTM F593 Type 304 or 316. Rubber Seals - Neoprene, ASTM D2000. Guide Bars: Ultra High Molecular Weight Polyethylene, ASTM ...
Manufactured by:BERGTEC International AG based inMeggen, SWITZERLAND
The RIS Weir-Gate with Rising Plate is engineered to manage water retention and regulation with precision. This gate features a watertight design on three sides, adaptable to both upstream and downstream pressure variations. It offers an open and closed function with intermediate adjustments, ensuring versatile application. Constructed with a ...
Manufactured by:Braun Maschinenfabrik Gesellschaft m.b.H. based inVöcklabruck, AUSTRIA
BRAUN weir flaps and segments garantee the optimal regulation of the weir systems. Robust and durable construction in combination with qualitative, high-quality hydraulics and hydraulic cylinders from well-known manufacturers guarantees a faultless operation of the system. Drive cylinders can be realized in front of the debris protected in niches or behind the ...
Manufactured by:KWT Group/ KWT International member of Bergschenhoek Groep based inBiddinghuizen, NETHERLANDS
KWT weirs are very varied and are used in surface, sewage and process water systems. The KOS system is a vertical gate that allows a constant adjustment of the upstream water level and can be used to keep the upstream water level at a desired level. The water flows over the gate thus creating an overshot, and allows for very accurate adjustment ...
Manufactured by:HST Systemtechnik GmbH & Co. KG based inMeschede, GERMANY
ASA-Weirs serve primarily as cascade dams, flushing weirs and relief weirs. They activate reservoir volumes, generate hydropeaking and make a variable overflow edge to separating structures and relief dams. Technically, the ASA-Weirs are XXL hydraulically-driven, pressure- sealed sliders, manufactured with the highest level of ...