Refine by
Wind Power Performance Equipment & Supplies
20 equipment items found
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 020C, manufactured by Met One, measures wind direction with research-grade accuracy and precision. The 020C is commonly used with the WMS100 for wind-farm power performance measurements. The 020C is especially suited to your applications that require a low starting threshold, a high damping ratio, or a short delay ...
by:Kintech Engineering based inZaragoza, SPAIN
The Thies First Class Cup Anemometer is designed for wind resource assessment and power performance studies at IEC 61400-12-1 Class A and B ...
Manufactured by:Ammonit Measurement GmbH based inBerlin, GERMANY
Wind and Solar Resource Assessment. Wind Farm Monitoring (SCADA). Power Performance Measurements. Compliant with IEC 61400-12-1. User-friendly configuration. Secure IT architecture. Several inputs and outputs for various measuring ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. Our data loggers ...
Manufactured by:Ammonit Measurement GmbH based inBerlin, GERMANY
Wind and Solar Resource Assessment. Wind Farm Monitoring (SCADA). Power Performance Measurements. Compliant with IEC 61400-12-1. User-friendly configuration . Secure IT architecture. Several inputs and outputs for various measuring ...
Manufactured by:Ammonit Measurement GmbH based inBerlin, GERMANY
Wind and Solar Resource Assessment. Wind Farm Monitoring (SCADA). Power Performance Measurements. Compliant with IEC 61400-12-1. User-friendly configuration. Secure IT architecture. Several inputs and outputs for various measuring ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546D, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546D features permanent magnets mounted on the shaft that activate ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546C, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546C features a durable construction and is suitable for both ...
Manufactured by:Knick Elektronische Messgeräte GmbH & Co. KG based inBerlin, GERMANY
Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Working voltages up to 1000 V AC/DC and test voltages up to 5.4 kV AC, maximum performance in a compact modular ...
Manufactured by:Sensornet based inElstree, UNITED KINGDOM
The Oryx+ DTS is a compact Distributed Temperature Sensing (DTS) system, designed to offer an advanced and reliable solution for the monitoring in harsh environments, ideal for applications from desert to sub-zero conditions. The Oryx+ is an autonomous, low powered device (12-24V DC) allowing the system to be powered by solar or wind power. Designed to be weather and dust proof for cost effective ...
Manufactured by:NRG Systems based inHinesburg, VERMONT (USA)
ZX TM is a nacelle-mounted Lidar that uses continuous wave technology to measure the full shear and veer wind profile of a wind ...
Manufactured by:Spica Technology ApS based inSilkeborg, DENMARK
By replacing your old wind turbine control system with the Spica SCS Retrofit Wind Turbine Controller in your ageing turbine, you can reduce downtime and optimise performance as troubleshooting becomes faster and more qualified. With the Spica SCS Retrofit Controller, wind turbine owners can replace their old control system with a new wind turbine controller that offers the latest standards in ...
Manufactured by:Taixiong Magnetic based inShanghai, CHINA
Introduced in 1983, the Sintered Neodymium Iron Boron (NdFeB) magnet stands as a remarkable innovation primarily composed of neodymium, iron, and boron. Its intrinsic coercivity far surpasses that of ferrite by a remarkable margin of 5-10 times, and exceeds aluminum-nickel-cobalt by a remarkable margin of 6-10 times. Remarkably, it boasts a maximum energy product that is a staggering 5-15 times ...
Manufactured by:Dulas Ltd based inMachynlleth, UNITED KINGDOM
Remote sensing devices are lightweight and easily transportable, they do not require planning permission and can be applied both offshore and onshore to gather wind data from 40m to 300m in height, with up to 20 separate height measurements taken every ...
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The Lidar technology becomes indispensable in the development of wind energy projects, especially when it expands from onshore to offshore. The wind measurement solution by lidars is more cost-saving and ...
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The new era of Lidar Wind Energy is on its way, as the capacity and development of wind energy continues to increase and expand from onshore to ...
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The edge-cutting remote sensing Lidar technology has enabled Doppler Lidars to unleash tremendous opportunities for the offshore wind ...
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The wind turbine control system is the nerve centre of a wind turbine, managing each component to ensure safe and optimized operation. The nacelle-mounted lidars can provide a preview of incoming turbulent ...
Manufactured by:Qingdao Leice Transient Technology Co., Ltd. based inQingdao, CHINA
The Lidar for Wind Turbines are an advanced wind radar technology that can monitor wind speed and direction in real time and provide accurate data for wind energy generation. Secondly, using our products, changes in wind speed and direction can be monitored in real time and alerts can be issued in a timely manner. Finally, this product can also monitor the wear degree of wind turbine blades, so ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
Offshore wind farms tend to use units with larger capacity. At present, major wind turbine manufacturers in the market have developed or are developing high-power offshore generators. Our company's wind turbines can cover more offshore wind conditions, enhance our company's competitiveness in the field of offshore wind turbines, help to seize the market share and the highest point of wind ...