Show results for
Refine by
Flare Stack Equipment Supplied In Australia
13 equipment items found
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in ...
Manufactured by:Ennovo based inNorth Adelaide, AUSTRALIA
Our elevated flare range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment works and other anaerobic ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any ...
Manufactured by:Gasco Pty Ltd. based inMelbourne, AUSTRALIA
Flares, also known as gas flares and flare stacks, are a gas combustion device used in industrial plants such as petroleum refineries, chemical plants, and natural gas processing plants as well as at oil or gas production sites having oil wells, gas wells, offshore oil and gas rigs and landfills. Gasco, along with our technology ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly quicker than those of a standard thermocouple ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The liquid seal drum is a specially designed vessel containing a predetermined level of water in the base of the drum. The main purpose of the liquid seal drum is to stop flame propagation in the unlikely event of flashback. The liquid seal also acts as a large check valve so that gas can not travel upstream for any reason. A third function of the liquid seal is to disentrain liquid droplets. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel gas passes through an inspirator at the base of ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The LWIR-640 long-wavelength thermal imagers build on more than 20 years of thermal imaging experience, expanding the market-leading range of LAND temperature measurement solutions. They offer a full temperature measurement range of -20 to 1000 °C (-4 to 1832 °F) in three ranges with a choice of different optics and ...
Manufactured by:Fabtech SA Pty Ltd. based inDulwich, AUSTRALIA
Anaerobic systems incorporate the use of flexible membrane covers to collect methane gas. This methane gas is collected from around the perimeter via a perforated piping system and then processed in either flaring or co-generation. Specially designed weights and floats are attached to the cover membrane, which cause the horizontal ‘planes’ or ‘plates’ of the cover to be ...
Premium
Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path and/or ...