Show results for
Refine by
Applications
- Air Quality Monitoring Equipment for Sample Handling Industry
- Air pollution, emission and process monitoring systems for agriculture
- Asphalt production - monitoring solutions for process optimization & energy saving
- Stack gas emission monitoring for the energy industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
Stack Emissions Equipment Supplied In Belgium
37 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The STACKFLOW 200 uses the well established Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Both pump modules can also be used as used as individual dual or high flow sample pump. In the all stainless version it withstands normal corrosive gasses as they are present in standard stack gas emission. The pump drive mechanism has been designed for a smooth and low vibration, silent and long lasting continuous mode of ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The Model 109A is a Heated Non Methane Hydrocarbon FID Analyzer thousandfold used throughout industrial environmental and stack emissions applications as well in ambient air and indoor air concentration measurements. Manufactured since 1989 this analyzer this heated dual FID analyzer continuously and simultaneously measures the Methane, Total Hydrocarbon and Non ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of THC or simultaneous THC, nmHC & CH4. Uses the Flame Ionization Detection (FID) principle, an accurate technology for the measurement of VOC (THC – Total Hydro Carbons) / nmHC (non-methane hydrocarbons) / CH4 ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all circumstances . QAL1 certification range 0-5 µg/m3, the lowest on the ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process, stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The Model 3-700 complements an FTIR analyzer with full ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The Model 5-500 Heated FID Analyzer is the fully heated version of our 5-100 analyzer for pressurized samples measures low trace total hydrocarbon concentration in CO2, Argon, Helium, Nitrogen N2O and many other technical gases as well as from emissions sources. The 5-500. For fastest response and highest accuracy all components in contact with sample are housed in a 190 deg Celsius heated oven, ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer ...