Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Heat transfer products solutions for the industrial refrigeration sector
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Environmental toxicity testing kits for chemicals applications
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Pressure Sensor for Ground and surface water
- Air pollution, emission and process monitoring systems for minerals
- Gas flow management solutions for standard applications sector
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Continuous emissions monitoring solutions for waste to energy plants
- Cleanrooms for Specialty Chemicals Sector
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Belgium
12,080 equipment items found
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
5-50 kg/h of dry PAC with a re-dilution of 3-5 m3/h and a final concentration of max. 1%. Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN canned motor vacuum blowers are a type of positive displacement blower that comes with a hermetically sealed drive ideal for the conveyance of aggressive and neutral gases. These vacuum systems are useful in industrial high vacuum technology due to their high power, reliability, and ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Output 100 – 10,000 g/h of chlorine. Ultra-pure or low-chloride and low-chlorate sodium-calcium hypochlorite requires specialist system technology. The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range of single-head pump: 3 – 1450 l/h, 100 – 7 bar. As an extremely robust hydraulic diaphragm metering pump, the HYDRO range meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Ultra-compact and flexible microplate storage with a capacity of up to 232 microplates in four stacks. With rotating stacks and one transfer position, the patented microplate storage solution offers maximum plate capacity in the most compact ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range of single-head pump: 0 – 9200 l/h, 400 – 30 bar. The hydraulic diaphragm metering pump ORLITA MF offers reliable dosing rates even under high pressure and has a modular construction, making it highly versatile. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Graduated measuring ranges 0.01 – 10 mg/l. Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The TOC/TNb-analyzers of the new multi N/C x300 series use unique technologies and an intuitive software to make your day-to-day laboratory routines easier while delivering results fit for any interlaboratory study. ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
Powerful, efficient and designed for continuous operation: the oil-injected VMX Premium air ends from AERZEN have a proven track record for reliability in tough situations. With 10 power levels, they are sure to become your first choice when it comes to configuring high-quality air ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity: 40 – 1,000 l/h. The ready-wired modular metering system DULCODOS is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Multi-element analysis and ease of use at a manageable cost. The contrAA 800 combines the best of standard AAS instruments and ICP-OES spectrometers. Take your demand for precision and performance to the next level and cover the entire range of AAS with a single lamp. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range 146 – 1,030 l/h, 12 – 4 bar. The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Gas flow up to 0.6 ln/min. Liquid flow up to 20 ml/min. Operating pressure up to 10 bar(g). IP65 ingress protection. ...