Refine by
Applications
- Water monitoring instruments for surface water monitoring
- Water monitoring instruments for groundwater monitoring
- Surface water quality testing for the environmental monitoring industry
- Water monitoring instruments for water quality monitoring
- Low flow sampling, methodology for groundwater sampling
- Dust control solutions for mining industry
- Dust control solutions for municipal industry
- Dust control solutions for construction industry
- Dust control solutions for agriculture industry
- Dust control solutions for other applications
- Water quality monitoring for the groundwater monitoring industry
- Wastewater testing for the water treatment industry
- Water monitoring by early flood warning system
Xprt Equipment Supplied In Botswana
605 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
In case a mobile unit is not your preferred choice, it is also possible to install suction pumps in an existing service cart to be able to reclaim gas in accordance with the IEC 62271 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially provided for the handling of gas mixtures (Alternative Insulating Gases). The handy individual MINI components for recovery, consisting of a compressor and a vacuum compressor, are connected to the unit via wire-braided ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
New SF6 as well as used SF6 with a SO2 content of < 250 ppmv. Manufactured according to technical regulations for compressed gases with TÜV certificate. Gas cylinder labelling in accordance with DIN EN ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This series is very powerful and allows quick evacuation of large gas compartments. A vacuum pump combined with a Roots pump enables to obtain a final vacuum of 2x 10-2 mbar. Thus not only air but also moisture is removed from the circuit breakers. Therefore the subsequent filling process is prepared perfectly. Three coupling connections (DN20 and 2 x DN40) allow the evacuation of two gas ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The mobile vacuum pump unit is convincing by its easy handling. The unit serves for evacuation of air or nitrogen from switchgear. The 40 m³/h vacuum pump (standard version) enables a fi nal vacuum of < 1 mbar. Thus it is guaranteed that no air/gas mixture can be generated and the excellent insulation properties of SF6 are maintained. The 2-stage vacuum pump (available as option) even ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi-Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of gaseous and dusty decomposition products from large gas ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These tanks offer sufficient volume to safely store or withdraw even large gas quantities. The digital integrated weighing scales allow to determine the filling weight with an accuracy of up to ±500 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For measurement of the SO2 concentration in gas mixtures. Before maintenance works are carried out it is absolutely necessary to know the gas quality. This special equipment allows precise measurement of SO2 in gas mixtures. Furthermore, this device is very resistant against contamination and SF6 decomposition products and is therefore a reliable instrument for each revision of circuit ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. The DensiControl DA allows quick checking to see whether the density monitor switching points are triggered in time. This device allows precise, quick and easy verification of the switching points. The density monitor type to be checked is selected in the data base and is then installed ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The H2 filling station enables the refueling of gaseous hydrogen from up to 4 different H2 storage tanks (cylinder bundles). The filling process is simple and uncomplicated, it can be started quickly and runs automatically. Depending on the pre-pressure in the H2 storage tanks, a vehicle can be refueled up to a maximum of 300 bar. Gas type: H2. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The cordless battery-operated LEAKSPY C4 precisely measures the C4-FN concentration in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppm. The device allows precise localisation of leaks by searching the highest C4-FN concentration.Thanks to the high resolution and detection limit, it is also possible to carry out integral ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Final vacuum ‹ 1 mbar. DILO couplings DN20. 550 x 430 x 800 mm, 80 kg. Operating voltage: AC 200-240 V, 50/60 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For evacuation of air and safe refilling of SF6 into gas compartments by overpressure This device covers two important functions: The integrated vacuum pump allows the evacuation of air down to < 1 mbar so that no air/gas mixture is produced during the subsequent filling process. The use of gastight and selfclosing DILO couplings guarantees emission-free gas handling. The weight of the gas to ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...