Refine by
Xprt Equipment Supplied In Burundi
382 equipment items found
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
Stand-alone solar/wind/hybrid systems can eliminate the need to build expensive new power lines to remote locations. For rural and remote applications, renewable energy can cost less than any other means of producing electricity. Renewable energy systems can also connect to existing power lines to boost electricity output during times of high demand such as on hot, sunny days when air ...
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
Provides the best charge effect through the optimize charging algorithm and therefore, greatly extend the battery ...
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
A battery stores the energy produced for allowing it to be available on demand, at night, or during cloudy ...
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
Portable systems are suitable for various applications in remote ...
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
Mono and poly cristalline PV solar panels from the best ...
Manufactured by:AYTON Clean Energy based inBujumbura, BURUNDI
Permits to transform DC electricity generated from solar modules into AC consumed by AC home ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Connect your sensors, like a water level logger and water quality probe, to our new GDT-S Prime Plus and transmit sensor data to anywhere in the world. Our GDT-S Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Seismic CPT is performed by pausing at regular intervals throughout the CPT and generating seismic waveforms at the surface. These waveforms are detected by a seismic module behind the CPT cone. The seismic module houses a tri-axial accelerometer that can be used with either a 10 cm2 or a 15 cm2 cone to perform seismic cone penetration ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a (flash) ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Connect your sensors, like a water level logger and water quality probe, to our new GDT Prime Plus and transmit sensor data to anywhere in the world. Our GDT Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Van Dorn water sampler set with horizontal water bottle is specially designed for sampling in open water. Due to the choice of materials the set is also suitable for sampling coastal waters and for the analysis for heavy ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The portable electronic balance with digital reading allows for accurate weighing in the field. The weighing capacity is 320 gram with an accuracy of 0.1 gram. The balance with hinged cover is highly protected against all kinds of pressure. The wallet-size can be conveniently kept in a jacket pocket. Nett-total weighing is possible: weight of tare-cup and weight of components are memorized in two ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Granular composition test set, complete set with sieve shaker and standard set of sieves for dry and wet ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Stainless steel wire mesh sieve, Ø 200 mm, rim size 50 mm, aperture 0.053 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Edelman auger Sand type, specially designed for use in non-cohesive soils. The wide blades are twisted for good soil penetration and are specially designed to keep the sample inside the auger. Available as one-piece auger or bottom part with various diameters and ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Bailer auger set for hand-operated augerings, as well as the installation of sampling and monitoring wells, up to 7 metres depth in heterogeneous ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The protective cap for drill pipes with a diameter of 90 mm is available in a variant with internal thread and with external thread. The protective caps are made of sturdy ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The casing tube clamp consists of a hinged joint that fits around the casing tube, two handles and a rotating lever. The handle clamps the casing tube with a pre-set force. The casing tube clamp is used to push or turn the casing tube in the ground, and to pull it out ...