Show results for
Refine by
Xprt Equipment Supplied In Cameroon
119 equipment items found
Manufactured by:Weidmann Electrical Technology, Inc. based inRapperswil, SWITZERLAND
Weidmann’s InsuLogix® B bushing monitor is a cost-effective continuous on-line transformer bushing monitor system for measuring relative power factor at operating voltage in high voltage capacitive bushings and/or HV current transformers. The transformer monitor device acquires, analyses, and trends data pertaining to AC insulation power ...
Manufactured by:Armtec based inCalgary, CAMEROON
BOSS 2000 is a corrugated dual wall High Density Polyethylene (HDPE) pipe. It combines the strength of a corrugated outer shell with a smooth inner wall to optimize hydraulics. Available in 100 to 900 mm diameters with a 320 kPa pipe stiffness, it is perfect for storm sewer pipe and drainage applications where certification to CSA Group standard B182.8 and Bureau de Normalisation du Quebec (BNQ) ...
Manufactured by:Armtec based inCalgary, CAMEROON
Big ‘O’® High Density Polyethylene (HDPE) tubing provides superior performance and durability in the agricultural, residential building and highway sectors. Using state-of-the-art manufacturing equipment, Armtec produces a full product line of both solid and perforated ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec UltraFlo is an innovative, flexible corrugated steel pipe (CSP) storm sewer pipe with a unique external box-shaped spiral rib corrugation and smooth pipe interior. It delivers superior hydraulic performance at an economical ...
Manufactured by:Armtec based inCalgary, CAMEROON
Platon is a rugged, dimpled High Density Polyethylene (HDPE) membrane that keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path. Platon is commonly used to waterproof block walls, poured concrete walls, permanent wood, existing foundations and Insulated Concrete Forms ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a low carbon ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The CL.AIR Exhaust After-Treatment System for GE’s Jenbacher gas engines is a thermal regenerative post-combustion system for engine exhaust gases. Since no catalytic reactions take place during the thermal treatment of the exhaust, as it is insensitive to impurities in the fuel gas, the CL.AIR system is particularly suitable for use with critical gases such as biogas, for which catalytic ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner of combined heat and power ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...