Show results for
Refine by
Xprt Equipment Supplied In Cameroon
119 equipment items found
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat and power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or hoppers ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec carries a full line of woven and non-woven geosynthetics manufactured from polyester or polypropylene. High-strength geosynthetics are commonly used in reinforced soil structures such as retaining walls, over-steepened slopes and embankments constructed on weak soils. Low upfront cost and highly predictable performance makes them a particularly cost-effective solution in soil ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec’s drivable steel sheeting is a highly versatile building material typically used for shore protection, headwalls and cut-off walls, as well as trench shoring. Interlocking seams at each vertical edge allow adjacent parts to be mechanically joined to make continuous ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec solutions meet the specialized needs of today’s mines, providing unsurpassed strength, high mobility, fast installation, reliability, functionality, versatility and easy ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec’s tunnel liners are specialized precast concrete products used in large-diameter bored tunnels. These liners are manufactured to a specific design radius in a series of segments that are installed in the field to form a complete ring, supporting recently excavated ...
Manufactured by:Armtec based inCalgary, CAMEROON
Armtec’s utility storage enclosures can be used for a variety of applications, and come with the option to customize the interior to meet specific needs. They are available in a range of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the diary industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the dairy’s cooling ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. In addition to the economic benefit, using ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The VGF series of high-speed engines are built with the durability expected from a medium-speed engine. Purposefully designed for a wide range of stationary, spark ignited, gaseous fuel applications, the compact VGF engine has a high power- to-weight ratio. The foundation for exceptional long-term performance is attributed to the core VGF family ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Biogas peaking stations are biogas-fuelled energy generation stations that are powered by biogas or biomethane. Biogas is one of the few dispatchable renewable energy technologies. Whereby wind and solar energy generate when the wind blows or sun shines biogas can generate electricity on demand, if the fuel has been stored in advance. This means at peak times and to balance electricity demand and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Biomethane or renewable natural gas (RNG) is produced via biogas upgrading. It can also be used as a renewable fuel in gas engines. Clarke Energy can provide both biogas upgrading and biogas engine ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Natural gas or biomethane can be transported in cylinders where there is no availability of gas distribution networks, via a virtual gas pipeline. This gas can be used in gas engines to generate electricity and heat at high efficiency through combined heat and power technology. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which facilitates the transfer of hot water to an external hot water ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
DIA.NE is a user-friendly engine management system. A colour graphic display provides a clear overview of all information. This diagnostic instrument features an effective alarm management system with all error messages date stamped and clearly presented in tabular form to identify the sequence of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic fermentation is a superior alternative to composting. Biogas – a mixture of methane and carbon dioxide – is created during anaerobic digestion and serves as a high-energy renewable fuel that can ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of engine, enclosure, silencer cooling system and other key ancillary components has been optimised for the requirements of the Australian coal gas and remote power ...