Logo XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business

Advertising options
  1. Home
  2. Equipment
  3. canada alberta
  4. sample heating
Show results for
Products
Services
Training
Applications

Companies


Refine by
Locations
Back to All Locations

  • Canada
  • Alberta
Brands

  • protea
  • ametek pi
  • keco
  • yamato
  • analytik jena
View all brands
Applications

  • Process analyzers & instruments for continuous emissions monitoring
  • Process analyzers & instruments for sulfur recovery tail gas
  • Process analyzers & instruments for sulfur pit gas
  • Process analyzers & instruments for SO2 emissions
  • Process analyzers & instruments for NOx emissions

Sample Heating Equipment Supplied In Alberta

35 equipment items found
In AlbertaAvailable In AlbertaNear Alberta

Protea - Heated Sample Probes

Protea - Heated Sample Probes

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of sufficient quality to enable long life of ...
CONTACT SUPPLIER

Protea - Heated Sample Lines

Protea - Heated Sample Lines

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
Protea supplies heated sample lines of lengths 1m to 50m for the sampling of gaseous samples where sample temperature control is imperative. With dedicated integrated calibration lines and robust end fittings, these lines are suitable for fixed or mobile applications. Protea also supplies ATEX approved ...
CONTACT SUPPLIER

Protea - Model HPS - Heated Sample Probe

Protea - Model HPS - Heated Sample Probe

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to ...
CONTACT SUPPLIER

Protea - TCU for Heated Sampling Equipment

Protea - TCU for Heated Sampling Equipment

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at ...
CONTACT SUPPLIER

Protea - Heated Gas Sampling System

Protea - Heated Gas Sampling System

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
CONTACT SUPPLIER

Analytik Jena - Heating and Shaking Systems
Premium

Analytik Jena - Heating and Shaking Systems

Manufactured by:Analytik Jena - Lab-loving people   based inJena, GERMANY
The CyBio system for heating and orbital mixing of reagents is the fully automated solution for incubating and denaturation of substances in the temperature range from ambient to 99 °C. An optimum heat transfer is realized through specific plate adapters, furthermore the Edge Locking Mechanism (ELM) guarantees the repeatable and accurate positioning of ...
CONTACT SUPPLIER

EnviroVault - 6WX6H Semi-Circular for Storage Tanks

EnviroVault - 6WX6H Semi-Circular for Storage Tanks

Manufactured by:EnviroVault LP   based inInnisfail, ALBERTA (CANADA)
Measuring 6 feet in width and height, this structure is tailored to meet substantial containment and storage needs. Its design allows ample space, accommodating large-scale applications like complete sampling systems or custom heating and pumping setups. Specifically engineered for integration with above-ground storage tanks, it is compatible with tanks ranging ...
CONTACT SUPPLIER

THERMOX - Model WDG-V - Blowback Combustion Analyzer

THERMOX - Model WDG-V - Blowback Combustion Analyzer

Manufactured by:AMETEK Process Instruments   based inPittsburgh, PENNSYLVANIA (USA)
The WDG-V Blowback offers a complete, direct-mounted solution with automated blowback functionality for combustion process control and safety in coal-fired power boilers and high-particulate applications. The WDG-V Blowback uses an integrated package to reduce footprint, eliminate heated sample line and simplify installation with single air/power connections. ...
CONTACT SUPPLIER

AMETEK PI - Model 919 - Hot/Wet Gas Analyzer

AMETEK PI - Model 919 - Hot/Wet Gas Analyzer

Manufactured by:AMETEK Process Instruments   based inPittsburgh, PENNSYLVANIA (USA)
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and reduced maintenance, with no moving ...
CONTACT SUPPLIER

Yokogawa - Model TDLS8220 - Extractive Tunable Diode Laser Spectrometer

Yokogawa - Model TDLS8220 - Extractive Tunable Diode Laser Spectrometer

Manufactured by:Yokogawa Electric Corporation   based inTokyo, JAPAN
Built upon Yokogawa's second generation of TDLS analyzers, the TDLS8220 continues to house all the industry's leading features in one robust device. The improved platform is designed for accurate, low maintenance, and reliable extractive oxygen measurements of process gas streams. For more information: ...
CONTACT SUPPLIER

AMETEK PI - Model 920 - Hot/Wet Multi Gas Analyzer

AMETEK PI - Model 920 - Hot/Wet Multi Gas Analyzer

Manufactured by:AMETEK Process Instruments   based inPittsburgh, PENNSYLVANIA (USA)
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
CONTACT SUPPLIER

AMETEK PI - Model WR-888 - Sulfur Recovery Tail Gas Analyzer

AMETEK PI - Model WR-888 - Sulfur Recovery Tail Gas Analyzer

Manufactured by:AMETEK Process Instruments   based inPittsburgh, PENNSYLVANIA (USA)
The 888 utilizes ultraviolet (UV) spectroscopy to accurately monitor hydrogen sulfide (H2S) and sulfur dioxide (SO2) concentrations in sulfur recovery tail gas. The analyzer delivers next-level reliability, with automatic flow control, flange temperature alarm and an extended ambient temperature range providing solutions to the most common external failure ...
CONTACT SUPPLIER

AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

Manufactured by:AMETEK Process Instruments   based inPittsburgh, PENNSYLVANIA (USA)
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
CONTACT SUPPLIER

Hot-Stage Systems

Hot-Stage Systems

Manufactured by:Mettler - Toledo Int. Inc   based inGreifensee, SWITZERLAND
Hot-stage microscopy is a powerful method which is widely used to visually examine all kinds of thermal transitions when the sample is heated or cooled. Observe your sample while it is heated or cooled – and understand better the physics of a transition. The heart of all hot-stage systems is the furnace with a ...
CONTACT SUPPLIER

Excellence Melting Point Systems

Excellence Melting Point Systems

Manufactured by:Mettler - Toledo Int. Inc   based inGreifensee, SWITZERLAND
The automatic transmitted light measurement and synchronized visual camera observations in reflected light mode guarantee reliable results. Simultaneous measurement of up to 6 samples and the short heating and cooling times - a product of the closed furnace principle - allow you to run multiple measurements in ...
CONTACT SUPPLIER

Protea - Model atmosFID - Total VOC Analyser

Protea - Model atmosFID - Total VOC Analyser

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
As a 19” rack analyser it can be provided in a complete fixed emissions system from Protea, or can be used as a standalone analyser. With quick measurement time and a complete heated sample path at 300°C, the atmsoFID can also operate as a process control, indoor VOC detector or automotive emissions ...
CONTACT SUPPLIER

Protea - Model SSCM - Self-contained Sampling System Control Module

Protea - Model SSCM - Self-contained Sampling System Control Module

Manufactured by:Protea Limited   based inMiddlewich, UNITED KINGDOM
Self-contained sampling control for use with Protea core gas analysers. The control of the gas sample in any analysis system is critical. From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. For this reason, Protea supplies the ...
CONTACT SUPPLIER

Advanced Level Moisture Analyzer

Advanced Level Moisture Analyzer

Manufactured by:Mettler - Toledo Int. Inc   based inGreifensee, SWITZERLAND
METTLER TOLEDO Advanced Moisture Analyzers. The HB43-S Halogen Moisture Analyzer combines METTLER TOLEDO heating technology with analytical power in a compact and rugged ...
CONTACT SUPPLIER

L-K Industries - Model TRANS-7100 - Transport Centrifuge

L-K Industries - Model TRANS-7100 - Transport Centrifuge

Manufactured by:L-K Industries   based inHouston, TEXAS (USA)
The L-K Industries Transport Series is ideal for determining sediment and water content on crude oil haulers, according to API MPMS Ch. 10.4 (ASTM D96). There are standard or digital, heated or non-heated, as well as 2 or 4-place trunnion arm configurations. The Transport series is compatible with pear-shaped (B) or short cone (D) style tubes. The rugged, steel ...
CONTACT SUPPLIER

Jenway - Model 62 Series  - Fluorimeters

Jenway - Model 62 Series - Fluorimeters

Manufactured by:Cole-Parmer   based inVernon Hills, ILLINOIS (USA)
Jenway offers three fluorimeter models to cover a wide range of applications and fluorscence measurements. The 6280 fluorimeter model is ideal for the most sensitive determinations with emission wavelengths up to 650nm. When higher emission wavelengths are required the 6285 fluorimeter with its red-enhanced detector is the unit of choice. For less sensitive applications and a broader wavelength ...
CONTACT SUPPLIER
  • Previous
  • Next
Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you
Back to top
About XPRT Media

XPRT is a global industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.


  • FAQs
  • Company sitemap
  • Category sitemap
XPRT is part of XPRT Media All Rights Reserved.
Terms
Privacy
  • XPRT RSS List
Our sites:
Environmental XPRT
Agriculture XPRT
Energy XPRT
Medical XPRT