- Home
- Equipment
- canada alberta
- wind direction sensor
Refine by
Wind Direction Sensor Equipment Supplied In Alberta
11 equipment items found
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 024A, manufactured by Met One, is a wind vane that measures wind direction only. You can use it in tandem with the 014A Wind Speed Sensor; however, this combination has been largely replaced by the 034B, which monitors both wind speed and wind ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 020C, manufactured by Met One, measures wind direction with research-grade accuracy and precision. The 020C is commonly used with the WMS100 for wind-farm power performance measurements. The 020C is especially suited to your applications that require a low starting threshold, a high damping ratio, or a short delay ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The NEW 034E Wind Sensor combines wind speed and direction measurements in a single sensing unit. It installs in minutes and provides accurate, long-term, continuous monitoring in hostile environments. The sensor uses a quick-connect sensor cable which may extend hundreds of feet without ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The 010C Wind Speed Sensor provides accurate and detailed information on horizontal wind speed. The lightweight three-cup anemometer is used in virtually all applications where fast response and low starting threshold(s) are of paramount importance. The 020C Wind Direction Sensor provides ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Wind Anemometer Sensor is a durable device designed to measure wind speed and direction. It utilizes three rotating cups or cones driven by the wind, with rotational speed corresponding to wind velocity. The wind direction is determined using a ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 014A, manufactured by Met One, is a three-cup anemometer that monitors wind speed for the range of 0 to 45 m/s with a threshold of 0.45 m/s. You connect the 014A directly to a Campbell Scientific data logger, which measures the anemometer's pulse signal and converts the signal to engineering units (mph, m/s, ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The A100LK is an anemometer suitable for your general meteorology applications and wind-energy surveys. Its low power consumption and wide power-supply range make it popular for remote locations with no access to ac power, and its pulse/frequency signal is ideal for use with Campbell Scientific data loggers. The sensor is constructed from anodized aluminum alloys, stainless steel, and ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The 034B, manufactured by Met One, combines a three-cup anemometer and vane into a single integrated package to measure wind speed and direction. It is cabled for use with our data loggers, and it can provide you with measurements for a variety of ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546D, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546D features permanent magnets mounted on the shaft that activate an electronic switching current. In response, this ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546C, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546C features a durable construction and is suitable for both on-shore and off-shore environments. The “C” ...
Manufactured by:Campbell Scientific, Inc. based inLogan, UTAH (USA)
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. Our data loggers measure the switch closure and convert the signal to engineering units (mph, m/s, ...