- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-LAM louvered deflector system is designed to prevent floating debris from entering stormwater overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond overflows. The ACU-LAM is ideal for installations where structural constraints prevent the installation of an ACU-SELF self-adjusting floating deflector or an ACU-STAT ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SOL solar-powered regulating system is designed to maintain a constant, precise flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water levels ranging from 0 to 40 feet (12 m). The ACU-SOL solar-powered regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-BEND hydraulically operated folding weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. The SURE-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLOAT floating regulator system is designed to maintain a constant, precise flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels ranging from 0 to 20 ft. (6 m). The SURE-FLOAT floating regulator has been used for flow control in settling ponds, tailings ponds, sedimentation ponds, stormwater retention tanks, reservoirs and ponds, as well as ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
During a storm, the high volume of flowing water can overload sewer systems and storage basins, causing overflow and flooding to the entire system. The ACU-VORTEX vortex flow controller is designed to regulate the inflow of stormwater overflow systems, combined with sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Backwash Strainer has been designed to remove solids from 25mm in size down to 30-micron particles. The general literature piece describes the various connection options available as well as the advantages of the Acme backwash arm design over that of competing manufacturers. ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SELF self-adjusting floating deflector system is designed to prevent floating debris from entering stormwater overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond overflows. The ACU-SELF can also be installed in canals or culverts where retention of floating elements is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLAP control unit system is designed to prevent flooding and backflow caused by high downstream water levels. ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLO balance regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water. water levels ranging from 0 to 40 feet (12 m). The ACU-FLO Balance Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The Pump Action Screen (PAS) is a simple, robust mechanical CSO screen consisting of a stainless steel half-round steel basket with 6 mm perforations, submersible pump, distribution piping and venturi. It is designed to prevent the discharge of non-biodegradable solid debris larger than 6 mm in two directions.Screening debris is cleaned from the underside of the screen chamber and expelled past ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-FLAP floating gate system is designed to prevent flooding and backflow caused by high downstream water levels, and acts as a floating weir with automatically adjusting crest elevation. TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-FLO compact regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7,100 gpm (450 L/s) for upstream flow. water levels ranging from 0 to 26 feet (8 m). The TRU-FLO compact regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WR Series Remote Relay Module operates within a CEW wireless gas detection network, acting as an addressable output to the CEW Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, etc at programmable set points. Since the WR Relay Module operates without the need to be hardwired to the controller, it can be located at any point within the ...