- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-BEND hydraulically operated folding weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. The SURE-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-GATE Flush Valve System is designed for efficient sediment removal from stormwater retention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) tanks, reservoirs, and tank bottoms. This system effectively removes debris in a single flush and has been successfully applied in CSO and SSO settings. Additionally, it can be utilized in agricultural and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
MUHR, whose roots lie in mill technology, has over 60 years of project-related expertise in dealing with water. As a special machine builder, we carry out both small and large projects according to the same principle: Our concepts are perfectly adapted to the situation on ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network. The LCD display provides a continuous digital read-out of gas concentrations for ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SOL solar-powered regulating system is designed to maintain a constant, precise flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water levels ranging from 0 to 40 feet (12 m). The ACU-SOL solar-powered regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 2-bolt flanged housing is designed for use in limited space and when there is an existing 2-hole ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-PRO overflow measurement profile system is designed to enhance the hydraulic capacity of a weir and accurately measure its overflow rates. ACU-PRO's unique and extensively tested design uses upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record overflow at weirs. The ACU-PRO can be installed in new overflow structures or directly on ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to customize the system parameters ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-JET jet regulation system is designed to maintain a constant and precise flow rate (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32,000 gpm (2,000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET jet regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO), and batch treatment plant effluents, and is ...
Manufactured by:BWS Manufacturing Ltd. based inCentreville, NEW BRUNSWICK (CANADA)
This unit is built with our extra heavy duty construction and features 8 Ft. wood filled ramps and a 6Ft. Beavertail to give an industry leading 6 degree loading angle. With dual 120,000 lb landing gear for extra stability, this tridem axle unit carries a full 25 Ton Payload. Built to be functional and long-lasting and caters to the particular needs of the Paving Industry. This model is also ...
Manufactured by:BWS Manufacturing Ltd. based inCentreville, NEW BRUNSWICK (CANADA)
This unit is built with our extra heavy duty construction and features an Air-Tilt deck and a No-Ramp access. It has a 20Ft. deck (24Ft. on 25 ton) and a self cleaning 6 Ft. Beavertail. With dual 120,000 lb landing gear for extra stability, this tandem axle unit carries a full 20 and 25 Ton Payloads respectively . Built to be ...
Manufactured by:BWS Manufacturing Ltd. based inCentreville, NEW BRUNSWICK (CANADA)
The Air Ramp/Air Tilt model of the EZ-2-LOAD Tag-A-Long trailers is the “cadillac” of the tag industry. Feature rich and designed with the operator in mind, this unit has no competition. Loading and unloading is simplified and safety is increased with the creative use of compressed air that is generated by the truck. The operation of the tilt deck mechanism is controlled by one lever ...
Manufactured by:BWS Manufacturing Ltd. based inCentreville, NEW BRUNSWICK (CANADA)
EZ-2-LOAD All-Steel Platform Trailers are characterized by two distinct features: WEIGHT – the lowest weight in the industry for all-steel platform trailers. DESIGN – designed to out-perform the competition – hands down. Compare the following sample WEIGHTS to those of the competition and you will quickly realize that we are the industry leader. Our platform trailers will ...