- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-GATE Flush Valve System is designed for efficient sediment removal from stormwater retention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) tanks, reservoirs, and tank bottoms. This system effectively removes debris in a single flush and has been successfully applied in CSO and SSO settings. Additionally, it can be utilized in agricultural and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-VAC vacuum flushing system is designed for flushing rainwater, surface water, combined sewage/rainwater, raw sewage storage tanks and equalization basins. ACU-VAC can be used in circular storm tanks (up to 65 m in diameter), rectangular storm tanks (up to 150 m in length) and sewer systems (up to 250 m in length). The ACU-VAC is designed to have a tank bottom slope of between 0.5 and 2%. ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLOAT floating regulator system is designed to maintain a constant, precise flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels ranging from 0 to 20 ft. (6 m). The SURE-FLOAT floating regulator has been used for flow control in settling ponds, tailings ponds, sedimentation ponds, stormwater retention tanks, reservoirs and ponds, as well as ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-FLO compact regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7,100 gpm (450 L/s) for upstream flow. water levels ranging from 0 to 26 feet (8 m). The TRU-FLO compact regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLAP control unit system is designed to prevent flooding and backflow caused by high downstream water levels. ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-BEND hydraulically operated folding weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. The SURE-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The stainless teel deep grove ball bearing series of Extreme Bearing can be used for a wide range of food and beverage applications. They are corrosion resistant when exposed to water and other corrosief media, these stainless steel deep grove ball bearings can handle radial loads and axial loads in both directions. The SS deep grove ball bearings have a lower load carrying capacity than the same ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 2-bolt flanged housing is designed for use in limited space and when there is an existing 2-hole application. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-RAKE self-cleaning bar screen system is designed to remove debris from stormwater overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The TRU-RAKE self-cleaning bar screen offers an economical and effective solution for preventing floating and suspended coarse matter from entering watercourses. It is designed for installation on ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This is a new type of bearing unit from Extreme Bearing designed to accommodate heavy axial loads. This complements the rest of the range as most of the other bearings are only suitable for minimal axial loads. The EXV bearing unit is designed for pure thrust loads and can handle little or no radial load. Perhaps this is a better solution for your needs if radial loads are ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Basket strainer consists of a removable screen that can easily be removed from the top. Basket Strainers are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainers temporarily disrupt?a?system?when cleaning is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-PRO overflow measurement profile system is designed to enhance the hydraulic capacity of a weir and accurately measure its overflow rates. ACU-PRO's unique and extensively tested design uses upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record overflow at weirs. The ACU-PRO can be installed in new overflow structures or directly on ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-BEND flexible weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume, without affecting overflow weir capacity in combined sewer overflow (CSO) applications. ACU-BEND's unique, patented and extensively tested design works by only allowing any excess water in the system to reach the receiving ...
Manufactured by:Energy Systems & Design (ES&D) based inSussex, NEW BRUNSWICK (CANADA)
New! Injection Molded housing with drip lip! The 1K Micro Hydro Power System is one of Energy System and Design’s answers to a version of our Stream Engine that can provide reliable power for your needs at an affordable price point. We have a steady supply of these systems available for our customers. Please refer to our Hydro Survey on our web page “How it works” and gather ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Oil and Gas Pipe Plug is a reinforced nitrile rubber made plug used to seal gas, oil and hydrocarbon ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
High Pressure Pipe Plug is mainly made of metal body bonded to extra reinforced rubber used to seal or test high pressure pipelines. High pressure Pipe Plugs are mainly made up of a metal body bonded to extra reinforced rubber. These pipe plugs are mechanical devices used for sealing and plugging the end of a pipe, which facilitates the hydrostatic testing and isolation of pressure barriers. HPP ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flow Through Packer is a double layer reinforced rubber used to repair pipelines while bypassing the flow through its bypass connection and allows the subsurface system to keep running during the repair. This system is ideally suited to avoid costly and time-consuming ...