- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
These pillow block bearings can be secured vertically or horizontally to support rotating shafts. In comparison to the EXS washdown pillow block bearing, this design is more compact and therefore more suitable in tight ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLAP control unit system is designed to prevent flooding and backflow caused by high downstream water levels. ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Extreme Bearing engineers have created a new corrosion-resistant generation of stainless steel plummer blocks. This generation EBL plummer block bearing housings are made of AISI 316 marine grade stainless steel, which makes them very suitable for application in the most difficult conditions and harsh ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-TIP tipping bucket is a sediment flushing system designed to remove debris deposited at the bottom of tanks, such as stormwater retention tanks or CSOs and sanitary equalization tanks. The system works by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses along the entirety of the drainage channel, pushing the debris deposited in front ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACRS L-Series Automatic Scraper Strainers are custom built to your specifications. Available in various sizes and materials with a helical scraper or linear blade and brush design, these units are the ideal choice to replace existing backwash strainers that are not performing properly. We have designs to replace RP Adams, SP Kinney, Hayward/Eaton 596 and 2596, Tate Andale, and most other vessels ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 4-bolt flange unit can be used in applications where ample space is provided for mounting the housing. The four bolts provide substantial mounting security for high load applications. Because the housing is made of stainless steel (grade 316), it is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. Because the rounded corners and ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Basket strainer consists of a removable screen that can easily be removed from the top. Basket Strainers are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainers temporarily disrupt?a?system?when cleaning is ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The stainless teel deep grove ball bearing series of Extreme Bearing can be used for a wide range of food and beverage applications. They are corrosion resistant when exposed to water and other corrosief media, these stainless steel deep grove ball bearings can handle radial loads and axial loads in both directions. The SS deep grove ball bearings have a lower load carrying capacity than the same ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the conductor. These Electrode Boilers have unlimited application possibilities wherever a need for process or space heating ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Take-up bearing units are used where shaft adjustment and belt tensioning are required, such as on food conveyors. A tensioner extends or retracts the conveyor pulley to adjust the tension on the conveyor belt. The EXT take-up bearing unit is made for heavy-duty applications and is ideal for harsh and corrosive ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme MGMS is our latest multipoint, multigas detection system designed with modular construction and remote connectivity in mind. A DIN-rail mountable system consisting of a CM (Controller Module), RM (Relay Module), and AM (Analog Module) snap together for ease of installation, expandability, and upgradeability. Industry-standard communication protocols like Ethernet and BACnet are available ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Manufactured by:Energy Systems & Design (ES&D) based inSussex, NEW BRUNSWICK (CANADA)
New! Injection Molded housing with drip lip! The 1K Micro Hydro Power System is one of Energy System and Design’s answers to a version of our Stream Engine that can provide reliable power for your needs at an affordable price point. We have a steady supply of these systems available for our customers. Please refer to our Hydro Survey on our web page “How it works” and gather ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Oil and Gas Pipe Plug is a reinforced nitrile rubber made plug used to seal gas, oil and hydrocarbon ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
High Pressure Pipe Plug is mainly made of metal body bonded to extra reinforced rubber used to seal or test high pressure pipelines. High pressure Pipe Plugs are mainly made up of a metal body bonded to extra reinforced rubber. These pipe plugs are mechanical devices used for sealing and plugging the end of a pipe, which facilitates the hydrostatic testing and isolation of pressure barriers. HPP ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flow Through Packer is a double layer reinforced rubber used to repair pipelines while bypassing the flow through its bypass connection and allows the subsurface system to keep running during the repair. This system is ideally suited to avoid costly and time-consuming ...