- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
These pillow block bearings can be secured vertically or horizontally to support rotating shafts. In comparison to the EXS washdown pillow block bearing, this design is more compact and therefore more suitable in tight ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 2-bolt flanged housing is designed for use in limited space and when there is an existing 2-hole application. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This is a new type of bearing unit from Extreme Bearing designed to accommodate heavy axial loads. This complements the rest of the range as most of the other bearings are only suitable for minimal axial loads. The EXV bearing unit is designed for pure thrust loads and can handle little or no radial load. Perhaps this is a better solution for your needs if radial loads are ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-TIP tipping bucket is a sediment flushing system designed to remove debris deposited at the bottom of tanks, such as stormwater retention tanks or CSOs and sanitary equalization tanks. The system works by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses along the entirety of the drainage channel, pushing the debris deposited in front ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Take-up bearing units are used where shaft adjustment and belt tensioning are required, such as on food conveyors. A tensioner extends or retracts the conveyor pulley to adjust the tension on the conveyor belt. The EXT take-up bearing unit is made for heavy-duty applications and is ideal for harsh and corrosive ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
MUHR, whose roots lie in mill technology, has over 60 years of project-related expertise in dealing with water. As a special machine builder, we carry out both small and large projects according to the same principle: Our concepts are perfectly adapted to the situation on ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-FLAP floating gate system is designed to prevent flooding and backflow caused by high downstream water levels, and acts as a floating weir with automatically adjusting crest elevation. TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-CLIMB floating ladder system is designed to reduce accidents and provide safe, easy access to manholes, tanks, basins and any structure requiring a ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme MGMS is our latest multipoint, multigas detection system designed with modular construction and remote connectivity in mind. A DIN-rail mountable system consisting of a CM (Controller Module), RM (Relay Module), and AM (Analog Module) snap together for ease of installation, expandability, and upgradeability. Industry-standard communication protocols like Ethernet and BACnet are available ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLAP check flap system is designed to prevent flooding and backflow caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Manhole Test Plug is made of reinforced rubber bonded to an inner metal part used for leak testing manholes. Model designation is Manhole Test Plugs (MTP). Used for manhole leakage test for testing tightness of such manholes, PLUGCO offers a special pipe balloon plug distinguished for simple handling. Manhole Test Plug is relatively short and light, equipped with three eyelet bolts for simple ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Packer is a double layer reinforced rubber used to point repair the pipelines by carrying chemical patches; it ensures coverage of the damaged area for the repair time required and provides essential ...
Manufactured by:Tire Recycling Atlantic Canada Corporation (TRACC) based inMinto, NEW BRUNSWICK (CANADA)
Ideal for use as an alternative to crushed rock, this premium recycled rubber is the perfect sustainable option for paths & walkways, horse arenas, golf cart paths, and more. The light but dense material makes it great for fill, aeration, and many other applications that would otherwise require crushed ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
The Nordic Commercial R Series is a water to heat pump designed for use in commercial applications such as apartment buildings or condo buildings. This heat pump heats air for ducted heating and cools air for central air conditioning and is available in both vertical and horizontal ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...