- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
These pillow block bearings can be secured vertically or horizontally to support rotating shafts. In comparison to the EXS washdown pillow block bearing, this design is more compact and therefore more suitable in tight ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The stainless teel deep grove ball bearing series of Extreme Bearing can be used for a wide range of food and beverage applications. They are corrosion resistant when exposed to water and other corrosief media, these stainless steel deep grove ball bearings can handle radial loads and axial loads in both directions. The SS deep grove ball bearings have a lower load carrying capacity than the same ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLO balance regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water. water levels ranging from 0 to 40 feet (12 m). The ACU-FLO Balance Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-TIP tipping bucket is a sediment flushing system designed to remove debris deposited at the bottom of tanks, such as stormwater retention tanks or CSOs and sanitary equalization tanks. The system works by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses along the entirety of the drainage channel, pushing the debris deposited in front ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-CLIMB safety handle system is designed to reduce accidents and provide safe, easy access to manholes, tanks, basins and any structure requiring a ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SOL solar-powered regulating system is designed to maintain a constant, precise flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water levels ranging from 0 to 40 feet (12 m). The ACU-SOL solar-powered regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WR Series Remote Relay Module operates within a CEL-LS RS-485 gas detection network, acting as an addressable output to the CEL Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, and other kinds of peripherals, at programmable set ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SCREEN fine-slotted overflow screen system is designed to remove debris from stormwater overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The ACU-SCREEN fine-slotted screen offers an economical and effective solution for protection against floating and suspended matter entering receiving streams. The ACU-SCREEN fine-slotted screen is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-BEND flexible weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume, without affecting overflow weir capacity in combined sewer overflow (CSO) applications. ACU-BEND's unique, patented and extensively tested design works by only allowing any excess water in the system to reach the receiving ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Electric with HT Thermal Storage for Heating Water and DHW Heater (In one package). This is one unit multipurpose in the boiler room. It has independent control of Water Heating, Domestic Hot Water and Glycol ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 4-bolt flange unit can be used in applications where ample space is provided for mounting the housing. The four bolts provide substantial mounting security for high load applications. Because the housing is made of stainless steel (grade 316), it is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. Because the rounded corners and ...
Manufactured by:Energy Systems & Design (ES&D) based inSussex, NEW BRUNSWICK (CANADA)
New! Injection Molded housing with drip lip! The 1K Micro Hydro Power System is one of Energy System and Design’s answers to a version of our Stream Engine that can provide reliable power for your needs at an affordable price point. We have a steady supply of these systems available for our customers. Please refer to our Hydro Survey on our web page “How it works” and gather ...