- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Take-up bearing units are used where shaft adjustment and belt tensioning are required, such as on food conveyors. A tensioner extends or retracts the conveyor pulley to adjust the tension on the conveyor belt. The EXT take-up bearing unit is made for heavy-duty applications and is ideal for harsh and corrosive ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLAP check flap system is designed to prevent flooding and backflow caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
During a storm, the high volume of flowing water can overload sewer systems and storage basins, causing overflow and flooding to the entire system. The ACU-VORTEX vortex flow controller is designed to regulate the inflow of stormwater overflow systems, combined with sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking garages. The UniSet employs the best sensing technologies available: ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLOAT floating regulator system is designed to maintain a constant, precise flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels ranging from 0 to 20 ft. (6 m). The SURE-FLOAT floating regulator has been used for flow control in settling ponds, tailings ponds, sedimentation ponds, stormwater retention tanks, reservoirs and ponds, as well as ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Electric with HT Thermal Storage for Heating Water and DHW Heater (In one package). This is one unit multipurpose in the boiler room. It has independent control of Water Heating, Domestic Hot Water and Glycol ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-GATE Flush Valve System is designed for efficient sediment removal from stormwater retention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) tanks, reservoirs, and tank bottoms. This system effectively removes debris in a single flush and has been successfully applied in CSO and SSO settings. Additionally, it can be utilized in agricultural and ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to customize the system parameters ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLAP control unit system is designed to prevent flooding and backflow caused by high downstream water levels. ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Manhole Test Plug is made of reinforced rubber bonded to an inner metal part used for leak testing manholes. Model designation is Manhole Test Plugs (MTP). Used for manhole leakage test for testing tightness of such manholes, PLUGCO offers a special pipe balloon plug distinguished for simple handling. Manhole Test Plug is relatively short and light, equipped with three eyelet bolts for simple ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Packer is a double layer reinforced rubber used to point repair the pipelines by carrying chemical patches; it ensures coverage of the damaged area for the repair time required and provides essential ...
Manufactured by:Tire Recycling Atlantic Canada Corporation (TRACC) based inMinto, NEW BRUNSWICK (CANADA)
Ideal for use as an alternative to crushed rock, this premium recycled rubber is the perfect sustainable option for paths & walkways, horse arenas, golf cart paths, and more. The light but dense material makes it great for fill, aeration, and many other applications that would otherwise require crushed ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
The Nordic Commercial R Series is a water to heat pump designed for use in commercial applications such as apartment buildings or condo buildings. This heat pump heats air for ducted heating and cools air for central air conditioning and is available in both vertical and horizontal ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...
Manufactured by:Energy Systems & Design (ES&D) based inSussex, NEW BRUNSWICK (CANADA)
New! Injection Molded housing with drip lip! In the 1970’s Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Pillow Packer is a foldable double-layer reinforced rubber used to repair large-sized pipes while the access point is limited. Generally, it is used for cylindrical shape ...