- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 3-bolt chevron-shaped flange bearing is suitable for special configurations on conveyors. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package units. They are designed to suit the various conditions required by new construction, conversion jobs, stand-by Hot water Generators, etc. ACME-SLIM’s are built narrow or control high in order to pass through existing 26” doors or corridors and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-BEND flexible weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume, without affecting overflow weir capacity in combined sewer overflow (CSO) applications. ACU-BEND's unique, patented and extensively tested design works by only allowing any excess water in the system to reach the receiving ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Our FRP Division designs and manufactures various types of FRP simplex, duplex, automatic scraper, and backflush filters for various industries. We provide complete skids with piping, valves, and instrumentation along with PLC control if required by clients. With our vast experience in fabrication since 1988, we perform several fabrication activities in-house as well as ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network. The LCD display provides a continuous digital read-out of gas concentrations for ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WR Series Remote Relay Module operates within a CEL-LS RS-485 gas detection network, acting as an addressable output to the CEL Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, and other kinds of peripherals, at programmable set ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLAP control unit system is designed to prevent flooding and backflow caused by high downstream water levels. ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment plants is avoided, and energy costs for pumping systems and wastewater ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Backwash Strainer has been designed to remove solids from 25mm in size down to 30-micron particles. The general literature piece describes the various connection options available as well as the advantages of the Acme backwash arm design over that of competing manufacturers. ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
EXS pillow blocks can handle high speeds and high radial loads but only minimal axial thrust. These 316 stainless steel pillow block bearing can be secured vertically or horizontally to support rotating shafts. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the conductor. These Electrode Boilers have unlimited application possibilities wherever a need for process or space heating ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-STAT fixed deflector system is designed to prevent floating debris from entering stormwater overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Manhole Test Plug is made of reinforced rubber bonded to an inner metal part used for leak testing manholes. Model designation is Manhole Test Plugs (MTP). Used for manhole leakage test for testing tightness of such manholes, PLUGCO offers a special pipe balloon plug distinguished for simple handling. Manhole Test Plug is relatively short and light, equipped with three eyelet bolts for simple ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Packer is a double layer reinforced rubber used to point repair the pipelines by carrying chemical patches; it ensures coverage of the damaged area for the repair time required and provides essential ...
Manufactured by:Tire Recycling Atlantic Canada Corporation (TRACC) based inMinto, NEW BRUNSWICK (CANADA)
Ideal for use as an alternative to crushed rock, this premium recycled rubber is the perfect sustainable option for paths & walkways, horse arenas, golf cart paths, and more. The light but dense material makes it great for fill, aeration, and many other applications that would otherwise require crushed ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
The Nordic Commercial R Series is a water to heat pump designed for use in commercial applications such as apartment buildings or condo buildings. This heat pump heats air for ducted heating and cools air for central air conditioning and is available in both vertical and horizontal ...