- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
During a storm, the high volume of flowing water can overload sewer systems and storage basins, causing overflow and flooding to the entire system. The ACU-VORTEX vortex flow controller is designed to regulate the inflow of stormwater overflow systems, combined with sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-BEND flexible weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume, without affecting overflow weir capacity in combined sewer overflow (CSO) applications. ACU-BEND's unique, patented and extensively tested design works by only allowing any excess water in the system to reach the receiving ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
MUHR, whose roots lie in mill technology, has over 60 years of project-related expertise in dealing with water. As a special machine builder, we carry out both small and large projects according to the same principle: Our concepts are perfectly adapted to the situation on ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SCREEN fine-slotted overflow screen system is designed to remove debris from stormwater overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The ACU-SCREEN fine-slotted screen offers an economical and effective solution for protection against floating and suspended matter entering receiving streams. The ACU-SCREEN fine-slotted screen is ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 2-bolt flanged housing is designed for use in limited space and when there is an existing 2-hole application. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SOL solar-powered regulating system is designed to maintain a constant, precise flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water levels ranging from 0 to 40 feet (12 m). The ACU-SOL solar-powered regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Basket strainer consists of a removable screen that can easily be removed from the top. Basket Strainers are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainers temporarily disrupt?a?system?when cleaning is ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 3-bolt chevron-shaped flange bearing is suitable for special configurations on conveyors. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Manhole Test Plug is made of reinforced rubber bonded to an inner metal part used for leak testing manholes. Model designation is Manhole Test Plugs (MTP). Used for manhole leakage test for testing tightness of such manholes, PLUGCO offers a special pipe balloon plug distinguished for simple handling. Manhole Test Plug is relatively short and light, equipped with three eyelet bolts for simple ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Packer is a double layer reinforced rubber used to point repair the pipelines by carrying chemical patches; it ensures coverage of the damaged area for the repair time required and provides essential ...
Manufactured by:Tire Recycling Atlantic Canada Corporation (TRACC) based inMinto, NEW BRUNSWICK (CANADA)
Ideal for use as an alternative to crushed rock, this premium recycled rubber is the perfect sustainable option for paths & walkways, horse arenas, golf cart paths, and more. The light but dense material makes it great for fill, aeration, and many other applications that would otherwise require crushed ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
The Nordic Commercial R Series is a water to heat pump designed for use in commercial applications such as apartment buildings or condo buildings. This heat pump heats air for ducted heating and cools air for central air conditioning and is available in both vertical and horizontal ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Our high-temperature heat pump (WH Series) is a liquid-to-water heat pump with a twist. The WH heat pump can use as its source either a typical ground loop (provided the entering water temperature does not fall below 50°F (10°C) or any clean incoming liquid that has been pre-heated to between 50°F (10°C) and 122°F (50°C). Some alternative heat sources include a buffer tank ...
Manufactured by:Energy Systems & Design (ES&D) based inSussex, NEW BRUNSWICK (CANADA)
New! Injection Molded housing with drip lip! In the 1970’s Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working ...
Manufactured by:PlugCo - a brand by ArGesim Makina based inCorum, TURKEY
Flexible Pillow Packer is a foldable double-layer reinforced rubber used to repair large-sized pipes while the access point is limited. Generally, it is used for cylindrical shape ...