- Home
- canada new brunswick
- Equipment
Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Gas detection for building ventilation control
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Process heating for commercial and industrial functions
- Algae control
- Odor control
- Biogas recovery
- Soil sampling and drilling solutions for golf and turf industry
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Ammonit Wind Ressource Assessment Systems
- Ammonit Solar Resource Assessment Systems
- Ammonit Wind Farm Monitoring Systems (SCADA)
- Ammonit Wind Resource Assessment in Cold Climates
- Odor control
Xprt Equipment Supplied In New Brunswick
1,562 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The SURE-FLOAT floating regulator system is designed to maintain a constant, precise flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels ranging from 0 to 20 ft. (6 m). The SURE-FLOAT floating regulator has been used for flow control in settling ponds, tailings ponds, sedimentation ponds, stormwater retention tanks, reservoirs and ponds, as well as ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SOL solar-powered regulating system is designed to maintain a constant, precise flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water levels ranging from 0 to 40 feet (12 m). The ACU-SOL solar-powered regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-GATE Flush Valve System is designed for efficient sediment removal from stormwater retention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) tanks, reservoirs, and tank bottoms. This system effectively removes debris in a single flush and has been successfully applied in CSO and SSO settings. Additionally, it can be utilized in agricultural and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network. The LCD display provides a continuous digital read-out of gas concentrations for ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-FLO balance regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 16 gpm (1 L/s) to a maximum of 4,000 gpm (250 L/s) for upstream water. water levels ranging from 0 to 40 feet (12 m). The ACU-FLO Balance Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is well ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACRS L-Series Automatic Scraper Strainers are custom built to your specifications. Available in various sizes and materials with a helical scraper or linear blade and brush design, these units are the ideal choice to replace existing backwash strainers that are not performing properly. We have designs to replace RP Adams, SP Kinney, Hayward/Eaton 596 and 2596, Tate Andale, and most other vessels ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-CLIMB floating ladder system is designed to reduce accidents and provide safe, easy access to manholes, tanks, basins and any structure requiring a ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-SCREEN fine-slotted overflow screen system is designed to remove debris from stormwater overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The ACU-SCREEN fine-slotted screen offers an economical and effective solution for protection against floating and suspended matter entering receiving streams. The ACU-SCREEN fine-slotted screen is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This is a new type of bearing unit from Extreme Bearing designed to accommodate heavy axial loads. This complements the rest of the range as most of the other bearings are only suitable for minimal axial loads. The EXV bearing unit is designed for pure thrust loads and can handle little or no radial load. Perhaps this is a better solution for your needs if radial loads are ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The TRU-FLO compact regulator system is designed to maintain a constant, accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7,100 gpm (450 L/s) for upstream flow. water levels ranging from 0 to 26 feet (8 m). The TRU-FLO compact regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and batch plant effluents, and is ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless medium. The WS Wireless GasPost Sensor / Transmitter includes a high gain antenna concealed inside the enclosure as well as a built-in battery pack that can be easily accessed and ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
This 3-bolt chevron-shaped flange bearing is suitable for special configurations on conveyors. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
During a storm, the high volume of flowing water can overload sewer systems and storage basins, causing overflow and flooding to the entire system. The ACU-VORTEX vortex flow controller is designed to regulate the inflow of stormwater overflow systems, combined with sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to customize the system parameters ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME Automatic Backwash Strainer has been designed to remove solids from 25mm in size down to 30-micron particles. The general literature piece describes the various connection options available as well as the advantages of the Acme backwash arm design over that of competing manufacturers. ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
Electric with HT Thermal Storage for Heating Water and DHW Heater (In one package). This is one unit multipurpose in the boiler room. It has independent control of Water Heating, Domestic Hot Water and Glycol ...
Premium
Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)
The ACU-STAT fixed deflector system is designed to prevent floating debris from entering stormwater overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, holding tank overflows and pond ...