The ACU-PRO overflow measurement profile system is designed to enhance the hydraulic capacity of a weir and accurately measure its overflow rates. ACU-PRO's unique and extensively tested design uses upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record overflow at weirs. The ACU-PRO can be installed in new overflow structures or directly on ...

CONTACT SUPPLIER

Premium

Grande - Model TRU-BEND - Overflow Bending Weir System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The TRU-BEND overflow weir system is designed to maintain maximum water levels before it overflows through the upstream, allowing full utilization of all available upstream storage volume without affecting overflow weir capacity in combined sewer overflow (CSO) applications. TRU-BEND's unique and extensively tested design works by only allowing any excess water in the system to reach the ...

CONTACT SUPPLIER

Premium

Sierra - Model d·flux - Multiparameter Mass Flow Meter

Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)

d·flux’s user-friendly Bluetooth app, Sierra Flow Connector, is available for free from Google Play. It allows you to easily and securely connect to d·flux with your Android mobile device to create and edit profiles (a set of settings). While operating in the field, you can adjust flow range and dynamic range, filter settings, alarms and warnings, and an assortment of other ...

CONTACT SUPPLIER

Premium

Sierra - Model QuadraTherm 640i - Air / Gas Thermal Insertion Mass Flow Meters

Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)

The QuadraTherm 640i is the most accurate insertion-probe thermal mass flow meter for air / gas mass flow rate measurement on the market today, achieving gas mass flow rate accuracy never before possible, +/- 0.75% of reading above 50% of full scale. The QuadraTherm 640i air / gas mass flow meter marks an accuracy breakthrough in thermal dispersion technology achieving extreme precision with ...

CONTACT SUPPLIER

Premium

Grande Extreme - Model 316 - Stainless Steel Axial Thrust Bearing Units

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

This is a new type of bearing unit from Extreme Bearing designed to accommodate heavy axial loads. This complements the rest of the range as most of the other bearings are only suitable for minimal axial loads. The EXV bearing unit is designed for pure thrust loads and can handle little or no radial load. Perhaps this is a better solution for your needs if radial loads are ...

CONTACT SUPPLIER

Premium

Sierra - Model BG3 - Partial Flow Dilution Meters

Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register as a legally recognized alternative method to CVS ...

CONTACT SUPPLIER

Premium

Grande Extreme - Model EXT 316 - Stainless Steel Take-Up Bearing Unit

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

Take-up bearing units are used where shaft adjustment and belt tensioning are required, such as on food conveyors. A tensioner extends or retracts the conveyor pulley to adjust the tension on the conveyor belt. The EXT take-up bearing unit is made for heavy-duty applications and is ideal for harsh and corrosive ...

CONTACT SUPPLIER

Premium

Grande - Model ACU-Screen - Fine Slotted Overflow Screen System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The ACU-SCREEN fine-slotted overflow screen system is designed to remove debris from stormwater overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The ACU-SCREEN fine-slotted screen offers an economical and effective solution for protection against floating and suspended matter entering receiving streams. The ACU-SCREEN fine-slotted screen is ...

CONTACT SUPPLIER

Premium

Grande - Model ACU-BEND - Flexible Bending Weir System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The ACU-BEND flexible weir system is designed to maintain maximum water levels upstream of the weir, allowing full utilization of all available upstream storage volume, without affecting overflow weir capacity in combined sewer overflow (CSO) applications. ACU-BEND's unique, patented and extensively tested design works by only allowing any excess water in the system to reach the receiving ...

CONTACT SUPPLIER

Premium

Grande - Model Tru-Flap - Floating Flap Gate System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The TRU-FLAP floating gate system is designed to prevent flooding and backflow caused by high downstream water levels, and acts as a floating weir with automatically adjusting crest elevation. TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, holding tank overflows and pond overflows. Overloading of sewer systems and treatment ...

CONTACT SUPPLIER

Premium

Grande Extreme - Model EXW 316 - Stainless Steel 2-Bolt Flange Bearing Units

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

This 2-bolt flanged housing is designed for use in limited space and when there is an existing 2-hole application. The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to ...

CONTACT SUPPLIER

Premium

Grande - Model ACU-TIP - Tipping Bucket Sediment Flushing System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The ACU-TIP tipping bucket is a sediment flushing system designed to remove debris deposited at the bottom of tanks, such as stormwater retention tanks or CSOs and sanitary equalization tanks. The system works by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses along the entirety of the drainage channel, pushing the debris deposited in front ...

CONTACT SUPPLIER

Premium

Sierra - Model InnovaSonic 210 - Portable Clamp-On Ultrasonic Flow Meter for High Accuracy Liquid Metering

Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)

The InnovaSonic 210 portable ultrasonic flow meter succeeds at delivering expanded functionality and field portability when a permanent installation is not required. The 210 is a complete liquid measurement kit with portable clamp-on transducers featuring a small handheld display interface with bright color display and push buttons. While principally designed for clean liquids, the 210 portable ...

CONTACT SUPPLIER

Premium

Sierra - Model InnovaSonic 203 - Economical Clamp-On Ultrasonic Water Flow Meter for Accurate Results

Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)

The InnovaSonic 203 liquid flow meter is optimized for customers still looking for high performance, but needing a lower-cost, less feature-rich option for dedicated clamp-on ultrasonic metering. The 203 digital liquid flow meter optimizes the measurement of water as it flows in HVAC, irrigation and other liquid ...

CONTACT SUPPLIER

Premium

Grande Extreme - Model EXP 316 - Stainless Steel Triangular Round Flanged Bearing Units

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

Paint, corrosion protection is not needed because EXG flanged housings are made of stainless steel (grade 316) which is rustproof and resistant to corrosion from sea water and almost all chemicals. Another great advantage of stainless steel bearing housing material is that they have a much greater tensile strength and not fragile like the cast iron flange bearing ...

CONTACT SUPPLIER

Premium

Grande - Model ACU-DRUM - Rotating Drum System

Manufactured by:Grande Water Management Systems Inc. based inLaval, QUEBEC (CANADA)

The ACU-DRUM rotating drum system is a sediment flushing device designed to remove debris deposited in stormwater holding tanks, combined sewer overflow (CSO) holding tanks, sanitary sewer overflow (SSO) equalization tanks and tank bottoms, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any reservoir, tank or ...

CONTACT SUPPLIER

Model Foam Log - Containment Berms

Manufactured by:Hi Point Industries Ltd. based inBishops Falls, NEWFOUNDLAND (CANADA)

Secondary Containment for tanks, tankers, trucks, equipment, and job-sites. High capacity containment. Reduce the cost, footprint, and installation time compared to permanent containment berms. Constructed to your specific size & capacity ...

CONTACT SUPPLIER

BioMaxx - Industrial Food and Beverage Water Treatment System

Manufactured by:BioMaxx Wastewater Solutions Inc. based inDelta, BRITISH COLUMBIA (CANADA)

Many manufacturing facilities and industries have successfully reduced their water treatment TCO – Total Cost of Operation buy improving in-house water and wastewater treatment. At BioMaxx, our team of experts can analyze your current water usage and make recommendations to improve your water system and your bottom ...

CONTACT SUPPLIER

Scanmudring - Subsea Grab

Manufactured by:Scanmudring AS based inMandal, NORWAY

2m3 grab for use on the 40Te Excavator has proven successfull for removal of large volumes of ...

CONTACT SUPPLIER

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you