- Home
- Equipment
- canada ontario
- diffusion sampling
Show results for
Refine by
Diffusion Sampling Equipment Supplied In Ontario
73 equipment items found
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), ...
Distributed by:Chrysalis Scientific Technologies Inc. based inBurlington, ONTARIO (CANADA)
By selecting one of the more than 140 gas and vapor sensors that are available, you can customize your detector to meet your personal monitoring requirements. The IQ250 is an extremely compact and lightweight unit, utilizing diffusion sampling to monitor the air. The sensor is attached via a coiled cable providing a reach of 24 inches. The IQ350 is equipped with ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or sample-draw. In the diffusion mode, up to four RF-IR-ST-24 Refrigerant Sensor/ Transmitters can be daisy-chained to the Monitor and transmit data on an RS-485 ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The MerPAS sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
For indoor applications, the MerPAS sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body diffusive ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling ...
Manufactured by:Bruker Corporation based inBillerica, MASSACHUSETTS (USA)
The ALPHA II is a compact FT-IR spectrometer with a footprint the size of a laptop. It is used for chemical analysis and enables you to do quality control, quantifications and verification of raw ...
Manufactured by:Agilent Technologies, Inc. based inSanta Clara, CALIFORNIA (USA)
The revolutionary Agilent Cary 7000 Universal Measurement Spectrophotometer (UMS) will satisfy all your solid sampling needs. Collect hundreds of UV-Vis-NIR spectra overnight, or characterize optical components or thin films in minutes to hours rather than hours to days. Delivering a turn-key solution for research, development and QA/QC in optics, thin films/coatings, solar and glass, the Cary ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID-includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...