- Home
- Equipment
- canada quebec
- surface sample
Refine by
Surface Sample Equipment Supplied In Quebec
13 equipment items found
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
Fluorescent chemical optical sensor foils combined with imaging technology allow easy 2D visualization of oxygen, pH or carbon dioxide distributions in heterogeneous samples. For measurement the sample surface is covered with the sensor film, which translates the analyte content into a light signal. The sensor response is recorded pixel by pixel ...
Manufactured by:Hoskin Scientific Limited based inBurnaby, BRITISH COLUMBIA (CANADA)
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Our Pocket Vane Shear Test Kit provides a quick and efficient method for measuring the undrained shear strength of saturated, fine-grained, cohesive soils, both in the field and in the laboratory. With this Torvane, simply measure shear strength on the ends of sample tubes, the surface of block samples or excavations, or other test specimens with ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS 5 lb. sand/silt dredge is a great tool for grab sampling sand or silt. The AMS sand silt dredge is made entirely from 300 series stainless steel. It features a hinged scissor jaw design with a trigger mechanism that holds the sampler open until it contacts the surface to be sampled. Raising the dredge closes the scissor jaws to collect ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Easily sample most types of bottom surfaces. Constructed from stainless steel and powder-coated carbon steel for corrosion resistance. The top of the sampling chamber is screened to allow water flow during deployment and reduce the frontal shock wave that may displace sediment as the dredge contacts the sample ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
Monitoring of these key parameters requires sensors that are reliable and accurate, the TurbiTechw² LS meets this requirement perfectly. The large optical surfaces and sample volume ensure that the information provided by the sensor is both representative of the process and tolerant of fouling. In addition, the sensor incorporates a self cleaning mechanism ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
Rainin LR Low Retention Tips – Advanced Repellent Surface. METTLER TOLEDO employs a unique manufacturing process to produce tips with a uniform field of highly-repellent fluoropolymer molecules that form an impenetrable “superhydrophobic” surface. The result: liquids and molecules are suspended above the polypropylene tip ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
Rainin LR Low Retention Tips – Advanced Repellent Surface. METTLER TOLEDO employs a unique manufacturing process to produce tips with a uniform field of highly-repellent fluoropolymer molecules that form an impenetrable “superhydrophobic” surface. The result: liquids and molecules are suspended above the polypropylene tip ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
The TurbiTech Sensors have been designed for use in aeration systems to monitor suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 14,000 mg/l. The sensors can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and suspended solids or turbidity. High MLSS concentrations promote numerous ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
The 7300 monitor is designed to offer consistent monitoring of multiple parameters from a centralized location. This flexible online system is suitable for use across a full range of drinking water and wastewater applications. The monitor's smart design interfaces with individual sensor probes and multi-sensor probes to accommodate measurement of up to 16 parameters. With a built-in, ...
Manufactured by:Ridge Tool Company based inElyria, OHIO (USA)
RIDGID offers a wide variety of cutters and augers to clean everything from grease to root blockages. With the RIDGID line of cable tools, you will always have the right tool for the ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration phase. Membrane Bio Reactors (MBR) typically run with MLSS values in the region of 8,000 to 14,000 mg/l. High MLSS concentrations promote numerous process benefits, including stable operation, complete nitrification, and reduced ...
Manufactured by:In-Situ Process based inFort Collins, COLORADO (USA)
The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and suspended solids or turbidity. The fully automatic self cleaning ...