- Home
- canada saskatchewan
- Equipment
Refine by
Applications
- UV water treatment for the water treatment market
- Gas detection for building ventilation control
- Roller Mill for Livestock Operation
- Process heating for commercial and industrial functions
- Dust control solutions for mining industry
- Dust control solutions for municipal industry
- Dust control solutions for construction industry
- Dust control solutions for agriculture industry
- Dust control solutions for other applications
- Cleaning process for water intake
- Effluent cleaning for wastewaters
- Medical and Bio-hazard Waste Treatment Technology with zero emissions
- Quarantined and International Waste
Xprt Equipment Supplied In Saskatchewan
1,620 equipment items found
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Premium
by:LiORA based inSaskatoon, SASKATCHEWAN (CANADA)
Monitors petroleum hydrocarbon (PHC) concentrations and soil gas conditions underground, continuously and automatically. Replaces or supplements periodic groundwater sampling — delivering real-time data on plume stability and remediation performance without repeated field visits. Real time sensor data routinely updates natural source zone depletion (NSZD) for improved risk ...
Premium
by:LiORA based inSaskatoon, SASKATCHEWAN (CANADA)
Get direct, ion-specific measurement of chloride concentration in ...
Premium
by:LiORA based inSaskatoon, SASKATCHEWAN (CANADA)
Monitors dissolved petroleum hydrocarbons and gases in groundwater, continuously and automatically. Replaces or supplements periodic groundwater sampling — delivering real-time data on plume stability and remediation performance without repeated field visits. Real time sensor data routinely updates groundwater models for improved risk ...
Premium
by:LiORA based inSaskatoon, SASKATCHEWAN (CANADA)
Monitors dissolved chlorides and potassium in groundwater, continuously and automatically. Replaces or supplements periodic groundwater sampling — delivering real-time data on plume stability and remediation performance without repeated field visits. Real time sensor data routinely updates groundwater models for improved risk ...
Premium
by:LiORA based inSaskatoon, SASKATCHEWAN (CANADA)
Measure soil and groundwater concentrations of multiple hydrocarbon species in ...
Premium
Manufactured by:Ivey International Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
I-Packer® is an easy to use well packer designed for in-situ remediation applications. It is availble in three sizes based on usage ranges for different diameter pipes and appropriate inflation pressures. I-Packer® can be applied in three (3) easy steps from inserting into the injection well to the desired depth, connecting to the easy to use pump-head, and inflating with the bike pump ...
Premium
Manufactured by:Ivey International Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
PFAS-SOL® is a Patent Pending Award Winning Breakthrough PFAS Remediation technology for PFAS mass removal from soil, bedrock, and groundwater regimes. PFAS-SOL® is a unique Sub CMC Selective Surfactant Desorption Technology Formulation that is biodegradable, pH neutral, non-corrosive, non-caustic, non-ionic, and impurity free, improving physical, biological and chemical availabiltiy for ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACRS L-Series Automatic Scraper Strainers are custom built to your specifications. Available in various sizes and materials with a helical scraper or linear blade and brush design, these units are the ideal choice to replace existing backwash strainers that are not performing properly. We have designs to replace RP Adams, SP Kinney, Hayward/Eaton 596 and 2596, Tate Andale, and most other vessels ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
Premium
Manufactured by:Ivey International Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
Petro-Wipes® were developed to provide a portable, self-contained field decontamination product that can adsorb petroleum hydrocarbons, chlorinated solvents, organo-metallic, free-product (LNAPL and DNAPL), metallic dust, as well as other contaminants. Petro-Wipes® meets the ASTM D5088 Standard for the Decontamination of Field Equipment Used at Waste Sites, and Low Level Radioactive Waste ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network. The LCD display provides a continuous digital read-out of gas concentrations for ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to customize the system parameters ...
Manufactured by:Pattison Liquid Systems Inc. based inLemberg, SASKATCHEWAN (CANADA)
Shurflo 2088 Series diaphragm pumps 12 VDC are used in a variety of spraying and transferring applications that require flows of up to 3.3 gpm (12.5 lpm). They are available in a variety of chemical-resistant materials. They can be mounted in any position and are designed for easy ...
Manufactured by:Filtralite - Leca Norge ASFiltralite based inRælingen, NORWAY
Filtralite® Pure HC 0,5-1 is high quality filter media, manufactured from expanded clay material, used for filtration in drinking water treatment. ...
Manufactured by:Topcon Precision Agriculture (TPA) - a subsidiary of Topcon Positioning Systems Inc (TPS) based inItabashi-ku, JAPAN
3D milling changes the way road resurfacing is done. To save time and to keep you a step ahead, your 3D design model now dictates and controls milling depth. Get ready to leave manual processes of milling thickness or reading out mill-marks on the road ...