Refine by
Applications
- Liquid/solid separation equipment for oil sands
- Liquid/solid separation equipment for refinery, chemical and petrochemical
- Liquid/solid separation equipment for coal mining and preparation
- Liquid/solid separation equipment for mineral processing
- Liquid/solid separation equipment for paste thickening and backfill
- Liquid/solid separation equipment for tailings
- Industrial solutions for power and cogeneration industry
- Industrial solutions for pulp and paper industry
- Mining & minerals solutions for acid mine drainage industry
Computational Fluid Dynamics Equipment Supplied In Canada
24 equipment items found
Manufactured by:Norcan Hydraulic Turbine Inc. based inCarleton Place, ONTARIO (CANADA)
Norcan Hydraulic Turbine Inc. has offered CFD design with Swiderski Engineering in developing state of the art runner and turbine designs, using Computational Fluid Dynamics (CFD) technology. Combined with our in house engineering, shop and field services this allows us to provide the most efficient and improved modern ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
Utilizing Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD). Newly designed trunnion bearings with "Figure 8" grease channels (Standard). External lubrication ports for both upper and lower bushings (Standard). Modified Scotch Yoke design to enhance lift and torque capabilities (Standard). ...
by:Babcock & Wilcox based inCharlotte, NORTH CAROLINA (USA)
This gives you a better combustion process and burn-out in the gas phase. The system is installed at the inlet of the first pass. VoluMix™ is designed on the basis of Computational Fluid Dynamics (CFD) modelling. CFD programs are advanced calculation tools for computations of three-dimensional turbulent flow with heat and ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
The DMX-RO pump is built for high-pressure, heavy-duty membrane feed services used typically in seawater reverse osmosis (SWRO) applications. Hydraulics are designed with advanced computational fluid dynamics (CFD) to provide best system performance and minimize operating expenses. The pump’s comprehensive hydraulic range permits precise ...
Manufactured by:Cleaver-Brooks based inThomasville, GEORGIA (US) (USA)
FLX has distinct design features that include non-welded ferrule tubes for ease of tube replacement; removable sectioned side panels permit full access to all tubes. FLX boilers are a 5-pass cross flow water tube design, optimized through computational fluid dynamics to maximize heat transfer thru every pass. Unlike competing designs, FLX ...
Manufactured by:Canadian Hydro Components Ltd. (CHC) based inAlmonte, ONTARIO (CANADA)
CHC has provided pit-type axial flow turbines to a number of hydro projects over the years, improving the design with each installation. Thanks to its research and development team, CHC has perfected this equipment configuration in order to not only improve its operation and performance, but also to increase profitability for project owners. Now working with its third generation design of pit ...
Manufactured by:Trojan Technologies - Veralto based inLondon, ONTARIO (CANADA)
Low-footprint advanced oxidation options with third-party validation for the treatment of bacteria, Cryptosporidium, and Giardia. A perfect solution for seasonal contaminant treatment applications including of algal toxins and taste and odor causing compounds due to ...
Manufactured by:Mazzei Injector Company, LLC based inBakersfield, CALIFORNIA (USA)
High-dosage ozone system designs, such as those required by some water reuse projects, place extraordinary demands on an ozone mass transfer system. Mazzei listened to consulting engineers, utility operators, environmental regulators and contractors to learn their diverse needs for extremely high-efficiency ozone mixing ...
Manufactured by:WesTech Engineering, LLC based inSalt Lake City, UTAH (USA)
WesTech Engineering has taken the next step in advancing thickener technology with our Thickener Optimization Package (TOP™). The TOP thickener design approach adds ten innovative features to the thickener to provide a better process ...
Manufactured by:Mazzei Injector Company, LLC based inBakersfield, CALIFORNIA (USA)
The Mazzei Chemical Mixing Reactor (CMR) was specifically designed to rapidly mix coagulants into a mainline flow. The CMR is based on Mazzei’s successful Pipeline Flash Reactor (PFR), a proven solution for mixing and contacting which has been installed in numerous municipal facilities ...
Manufactured by:FPS Food Process Solutions Corp based inRichmond, BRITISH COLUMBIA (CANADA)
GEM French Fry Fryers can be built for a wide range of throughput capacities. The fryers’ optimized oil flow and circulation control ensures consistent two-stage frying performance for uniform product quality along with perfect colour and texture. Keeping safety in mind, the specially designed fryer kettles eliminate dead spots and reduce fire hazards while increasing oil shelf ...
Manufactured by:Sulzer Ltd. based inWinterthur, SWITZERLAND
The SMD pumps are designed for a wide range of raw, clean, sea and brackish water applications. To meet the demands of the individual applications, the SMD benefits from a best-in-class hydraulic design that is combined with two specific mechanical envelopes; Standard SMD and Configured ...
Manufactured by:WesTech Engineering, LLC based inSalt Lake City, UTAH (USA)
Advanced Feedwell Design Improves Thickener and Clarifier Performance. WesTech’s patented EvenFlo® Feedwell achieves peak performance with its simple two-stage design. It significantly improves the overflow clarity while using a lower polymer ...
Manufactured by:SCIREQ - an emka TECHNOLOGIES Company based inMontreal, QUEBEC (CANADA)
The expoCube is a novel Air Liquid Interface (ALI)/Transwell in vitro exposure system which permits highly reliable and effective deposition of aerosols onto cells and tissues. This exposure takes advantage of Thermophoresis, which guides small particles and gas onto the target tissue through a temperature gradient and increases the deposition rate from 2% to ~40%. The integration of the expoCube ...
Manufactured by:Cleaver-Brooks based inThomasville, GEORGIA (US) (USA)
The Cleaver-Brooks CBEX firetube boiler featuring EX technology is a completely integrated boiler, burner, and controls system. Every core component has been designed and built by Cleaver-Brooks to work together, resulting in the most efficient and lowest-emissions firetube system ever built. The CBEX achieves higher operating efficiency than competitors' boilers, leading to lower fuel ...
Manufactured by:ANDRITZ Separation - ANDRITZ Group based inGraz, AUSTRIA
The ANDRITZ decanter centrifuge D is engineered with advanced wear-resistant materials, ensuring a long and continuous life cycle. Our diverse material options guarantee that your operations can withstand high temperatures, heavy-duty applications, and corrosive environments. Whether you need dewatering or thickening, our centrifuges can handle wide ranges of flow rates and types of sludge, ...
Manufactured by:Continental Carbon Group (CCG) based inStoney Creek, ONTARIO (CANADA)
TITAN® odor control system is a cost-effective alternative to conventional activated carbon adsorber designs. TITAN® uses carbon in a radial flow system that is significantly smaller and less expensive than traditional deep bed adsorber designs.TITAN®’s revolutionary airflow design allows the system to process odorous air at a much faster velocity than ordinary deep bed ...
Manufactured by:Calgon Carbon Corporation based inMoon Township, PENNSYLVANIA (USA)
Designed to treat flows up to 4.8 million gallons per day (15 MLD), the Sentinel 12 can effectively disinfect drinking water in small- to medium-sized treatment plants. The Sentinel 12 uses medium-pressure lamp technology to achieve greater than 4 log inactivation of Cryptosporidium and similar pathogens in drinking water. Medium-pressure lamp technology allows the Sentinel 12 to be compact with ...
Manufactured by:KLa Systems, Inc. based inAssonet, MASSACHUSETTS (USA)
Jet Mixers are widely used in both municipal and industrial wastewater treatment facilities to blend the plant influent and suspend light organic solids in circular equalization tanks. Other applications for these powerful hydraulic mixers include mixing anoxic tanks and anaerobic reactors with the latter application being for industrial waste streams only. Jet mixers are the technology of choice ...
by:Babcock & Wilcox based inCharlotte, NORTH CAROLINA (USA)
We manufacture highly reliable boilers that can operate up to 18 months between stops, a full six months beyond the industry standard. We have been designing and building boilers for decades. Our boilers require a minimum of maintenance and most cleaning can be carried out during ...