Show results for
Refine by
Applications
- Borescope Cameras for Oil and Gas Infrastructure Inspections
- Gas detectors and leak detectors for the oil and gas industry
- Gas detectors for the water industry
- Gas detectors for the manufacturing industry
- Gas Detectors for Consultancy Industry
- Gas detectors for the government and defence industry
- Gas Detectors for the University and Laboratory Industry
- Borescope Solutions for Automotive Industry
- Gas Detectors for the Aerospace Industry
- Gas detectors for the construction industry
- Gas detectors for the food and beverage Industry
- Gas Detectors For The Pharmaceutical And Medical Industry
- Borescope Solutions for Industrial Manufacturing
- Emissions Flow
- Boroscope Inspection Cameras for Corrosion Control
- Borescope Solutions for Military and Law Enforcement
- Borescope Cameras for Tips on Choosing a Sewer Drain Camera
- Borescope Solutions for Tanker Inspection
- Borescopes for Pump and Valve Assessment
- Borescope Solutions for Bearings, Transmissions and Gearboxes
Explosive Environment Equipment Supplied In Canada
39 equipment items found
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The ProTrode 250 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements in chemical processes which require demanding sensor specifications (e.g., explosive environments). The pressurized inline pH sensor has a measuring range from 0 – 14 pH and a unique sleeve diaphragm design, which enables very accurate pH ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The ProTrode 350 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements in chemical processes which require demanding sensor specifications (e.g., explosive environments). The pressurized inline pH sensor has a measuring range from 0 – 14 pH and a ceramic pin diaphragm design, which enables very accurate pH ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
ATEX Zone 1 Certified Pipe Crawler Designed for Extreme Safety and Precision. Safely conduct infrastructure inspections in potentially explosive atmospheres with the Proteus™ ExZ1 inspection robot. This advanced equipment is designed specifically for Zone 1 hazardous environments, enabling risk mitigation, enhanced clarity, and asset protection through ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The ADI 2045TI Ex proof Process Analyzer is used in hazardous environments where explosion proof protection is a critical safety requirement. The analyzer fulfills EU Directives 94/9/EC (ATEX95) and is certified for Zone-1 and Zone-2 areas. The analyzer design combines a purge/pressurization system with intrinsic safety electronic devices. The air purging phase ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The SOLO PRO+ ExZ1 explosion-proof pipe inspection camera is an advanced inspection solution engineered specifically for safe and effective operations in potentially explosive environments. Certified to stringent ATEX Zone 1 standards, this system ensures uncompromising safety, enabling detailed assessments in hazardous locations. ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The VIDEOSCOPE XT is a truly industrial-grade borescope that has been designed for hazardous environments. This US-made inspection system has been tested and certified under MIL-STD 810G method 511.6 (explosive atmosphere) in accordance with UL standards for NFPA 70: class 1 division 2 requirements for hazardous locations. This borescope camera is also UL ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of ...
Manufactured by:Servomex - a Spectris Company based inSugar Land, TEXAS (USA)
Reliable results in a testing range of hazardous environments. The DF-140E allows for reliable oxygen measurement in a wide variety of environments, including outdoors in a NEMA 4x enclosure and in explosive environments with a NEMA 7 remote sensor ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
In crude and condensate truck-loading facilities, the introduction of oxygen into the vapor space can create a dangerous explosive environment. If VRUs are used to recover tank vapors, the oxygen contamination of the vapor can cause O2 levels to exceed allowable limits for pipeline feeds (typically 10 PPM), preventing producers from putting their gas into the ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Our newest personal aerosol monitor provides real-time aerosol mass concentration readings for PM10, respirable, China respirable, PM2.5, PM1 and 0.8 DPM. The SidePak AM 520i is IECEx, ATEX, CSA, and IECEx-SIM certified for use in explosive ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
The Spartan™ Intrinsically Safe Noise Dosimeter Model 730IS is designed to safely make noise exposure measurements, even for workers in explosive environments, such as those found in the petrochemical industry and pharmaceutical manufacturing. The simple noise dosimeter design and intuitive setup make getting worker noise dose measurements easy and fast. ...
Manufactured by:Unisearch Associates Inc. based inConcord, ONTARIO (CANADA)
The accessories allow for A. extractive monitoring (e.g. stack or process control) using one of several different cell configurations or B. open path monitoring (e.g. cross-stack or open-air) using telescope based accessories. All units are NEMA enclosed for use outdoors or in explosive environments and configurations exist for internal or external computer ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Generate reports, including the full data file, from the mobile interface before sharing via email. The Spartan Series also includes an Intrinsically Safe Noise Dosimeter, Model 730IS, for explosive ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
In crude and condensate truck loading operations, when vapor balance loading is required to reduce emissions, oxygen contamination of the tank vapor space can be a major concern. With the introduction of oxygen into the vapor space, an explosive environment may exist creating a safety concern. If VRUs are used to recover the tank vapors, the oxygen contamination ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
With the MCG 2150 Remote Calibrator, setup, programming and calibration become a matter of 'remote control.' When used with any of the L&J gauging products (with Infrared Pickup), this compact intrinsically safe wireless unit allows the operator to access, view, and change programming data without ever removing the explosion proof housing. It is simply a matter of standing within ten (10) ...
Manufactured by:DOD Technologies Inc based inCary, ILLINOIS (USA)
It is ideal for monitoring toxic, combustible and refrigerant gases in commercial and light industrial, non-hazardous (non-explosion rated) ...
Manufactured by:Critical Environment Technologies Canada Inc. (CETCI) based inDelta, BRITISH COLUMBIA (CANADA)
The CXT2 Explosion Proof transmitter is a single channel transmitter that reliably and accurately monitors toxic, oxygen, combustible, VOC or CO2 gas concentrations in potentially explosive and harsh environments, including classified hazardous rated areas. ...
Manufactured by:Critical Environment Technologies Canada Inc. (CETCI) based inDelta, BRITISH COLUMBIA (CANADA)
The CGAS-SC Self-Contained Controller is a versatile gas detector that offers up to 3 channels for monitoring toxic, combustible and refrigerant gases in commercial and light industrial, non-hazardous (non-explosion rated) environments. It can be used as a standalone monitoring device or part of a larger gas detection system. It accepts 4-20 mA analog inputs and ...
Manufactured by:M3SH Technology based inHanwell, NEW BRUNSWICK (CANADA)
The P50 Environmental Monitor by M3SH Technology is a cutting-edge, multi-functional device engineered for accurately monitoring environmental conditions in hazardous work environments, including explosive and gaseous atmospheres. This fixed installation monitor features a 16 x 2cm OLED display for real-time data visibility, an audio alarm with a maximum level of ...
Manufactured by:Renown Electric Motors & Repair Inc. based inVaughan, ONTARIO (CANADA)
These drives are used to regulate the speed and torque of industrial machines; since these machines need to operate at varying speeds and forces depending on their specific duties, the inclusion of a drive is ...