Show results for
Refine by
Flare Stack Equipment Supplied In Canada
36 equipment items found
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's steam-assisted flare stacks are designed to combust heavy hydrocarbons with no smoke emissions when there is a source of high-pressure steam available on ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's air-assisted flare stacks are designed to eliminate smoke emissions when combusting heavy hydrocarbons. Smoke emissions are the result of inefficient combustion of the waste gas producing unburnt hydrocarbon particles, often caused by an insufficient fuel/oxygen content ratio. ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
FlareTech Inc. offers advanced retractable pilot systems engineered to enhance the reliability and efficiency of flare stacks in various industrial applications. These pilot systems ensure continuous ignition of waste gases, significantly reducing downtime and maintenance costs for petroleum companies. FlareTech's pilots are made from robust 316 stainless steel, ...
Manufactured by:Alberta Flares based inPonoka, ALBERTA (CANADA)
Flare stack: 2” Main. Height: 8' feet. Tri-fold Legs: 30” Radius. Unit weight: 50 lbs. Wind shroud: 6”. Inlet: 1”. Optionial: ½” Pilot ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
A utility flare stack is a fundamental type of open pipe flare used primarily for the combustion of waste gases. Its height is engineered to comply with safety regulations, ensuring proper dispersion of combustion products and minimizing ground level radiation, which is generally kept below 1500 BTU/hr/ft². The diameter is determined by the ...
Manufactured by:Alberta Flares based inPonoka, ALBERTA (CANADA)
Common Features: 4” x 40’ Single Tongue Tandem Axle. 4” Main, 2” Auxiliary. Zero Ground Disturbance. 12V Self-Contained Hydraulic Lift System. 7000 lb Jacks. Continuous Electronic Ignition System ...
Manufactured by:Alberta Flares based inPonoka, ALBERTA (CANADA)
This unit is completely self contained. No additional equipment required to set it up. 6” main, 3” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot (Optional) Footprint: length 44’ (13.4 m), width 30’ (9.1 ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's High Pressure or Low Pressure gas-assisted flare stack designs can eliminate smoke (HP Gas-Assist) or sour gas odours (LP Gas-Assist) on site. These designs can also be used to ensure efficient combustion in the most challenging of weather ...
Manufactured by:Advanced Energy Industries, Inc. based inDenver, COLORADO (USA)
Advanced Energy's FlareSpection system provides pilot flame monitoring for applications with multiple flare tips. You can confirm flare operation remotely and detect differences in flare stack heat signatures. Continuous, remote, and automatic monitoring of pilot flames and flared gases. High resolution 640 x 480 ...
Manufactured by:Alberta Flares based inPonoka, ALBERTA (CANADA)
This unit is completely self contained. No additional equipment required to set it up. 4” main, 2” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot ...
Manufactured by:Alberta Flares based inPonoka, ALBERTA (CANADA)
This unit is completely self contained. No additional equipment required to set it up. 6” main, 3” Auxiliary, 2” Shooter, 1/2” Pilot, Propane fireball ignition, 12 V hydraulic power pack, Windload rating 75 mph (120 km/h), Zero Ground Disturbance, 12V solar electronic ignition ensures continous pilot (Optional). Footprint: length 40’ (12.2 m), width 25’ (7.6 ...
Premium
Manufactured by:Optical Scientific Inc. (OSi) based inGaithersburg, MARYLAND (USA)
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a ...
Premium
Manufactured by:FIBERSCOPE.net based inWinnipeg, MANITOBA (CANADA)
The SOLO PRO+ ExZ1 explosion-proof pipe inspection camera is an advanced inspection solution engineered specifically for safe and effective operations in potentially explosive environments. Certified to stringent ATEX Zone 1 standards, this system ensures uncompromising safety, enabling detailed assessments in hazardous locations. Compact, portable, and ruggedly designed, this intrinsically safe ...
Premium
Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)
Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path and/or ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
The LWIR-640 long-wavelength thermal imagers build on more than 20 years of thermal imaging experience, expanding the market-leading range of LAND temperature measurement solutions. They offer a full temperature measurement range of -20 to 1000 °C (-4 to 1832 °F) in three ranges with a choice of different optics and ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
The Tornado Pilot Monitoring and Auto-Relight (TPMR) System is the most reliable ignition system for flare stacks. The TPMR System consists of a continuous pilot and a self-contained relight system, with very low fuel consumption (25 SCFH). The assembly is fully retractable to grade for easy inspection and servicing without the need for ladders, platforms, ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
FlareTech Inc. specializes in Air-Assisted Flares designed to efficiently dispose of heavy hydrocarbons without producing smoke. By introducing ambient air through blowers directly into the waste gas stream exiting the flare tip, these systems ensure a thorough air and fuel mixture. This is achieved using turbulence and stabilization techniques that maintain ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Flare Flow Monitor is a very reliable device consisting of a stainless steel pitot flow element in the stack and dynamic ranging difference pressure and temperature sensors. The flow monitor can be installed on any stack including flare stack or flare feed lines using a ...
Manufactured by:Advanced Energy Industries, Inc. based inDenver, COLORADO (USA)
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular ...