Show results for
Refine by
Applications
- Hydrogen Peroxide for Cyanide Treatment with H2O2
- Software and Hardware Solution for Odour Management
- Bulk Handling Systems for Solid Bulk Management
- Odor control
- Algae control
- Biogas recovery
- Odor Control Productsl for Landfills
- Odor Control Filter for Marine, Boat, RV
- Odor Control Productsl for Sewer & Septic Tank
Odor Capturing Equipment Supplied In Canada
15 equipment items found
Manufactured by:Quatro Air Technologies based inPointe-Claire, QUEBEC (CANADA)
Designed to fit into an application where direct capture from the source is possible. The SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment. LaserBlue Gel ...
Premium
Manufactured by:Industrial Odor Control (IOC) based inMcGrady, NORTH CAROLINA (USA)
Stop septic vent odor at the source with Wolverine Filters. The Wolverine Filters HD Septic Vent Filter is a heavy-duty activated carbon odor filter designed to remove septic and sewer gas odor before it spreads around your home, yard, roofline, or light commercial property. Wolverine Filters are activated carbon septic vent filters designed to remove septic and sewer gas odor at the source for ...
Manufactured by:Calgon Carbon Corporation based inMoon Township, PENNSYLVANIA (USA)
All Gone™ is the new revolution in air cleaning that captures odors and impurities, pulling them out of the air and out of your life for good. All Gone™ uses safe, natural, and environmentally friendly technology. Its millions of tiny holes or pores attract the odor causing molecules out of the air and capture them in the disk, ...
Manufactured by:BDP Industries based inGreenwich, NEW YORK (USA)
Agitated bay with forced aeration type technology for the toughest compost applications. Can accept the widest feedstock variations, requires the smallest system footprint and provides maximized odor capture and treatment ...
Manufactured by:Syntechnics, Inc. based inPaducah, KENTUCKY (USA)
SynTechnics Environmental Cover Systems efficiently and economically capture odors and vapors created by substances contained in tanks or reservoirs. Made of fiberglass reinforced plastic, they provide maximum strength at minimum weight, are aesthetically pleasing, meet demanding environmental requirements and are resistant to corrosion. ...
Manufactured by:Geomembrane Technologies- a brand by EVOQUA Water Technologies LLC based inFredericton, NEW BRUNSWICK (CANADA)
Capture odors and control algae with a Geomembrane Technologies suspended cover system. Geomembrane Technologies' suspended covers are functional and economical cover systems perfect for small rectangular or circular ...
Manufactured by:Allerair Industries based inMontreal, QUEBEC (CANADA)
The largest of our salon units, the Salon Pro 6 Plus is a source capture air-purifying unit designed to capture chemicals, odors and particles associated with manicures and pedicures, before they become airborne. It's equipped with a deep-bed activated carbon filter, a superHEPA and ...
Manufactured by:Allerair Industries based inMontreal, QUEBEC (CANADA)
The largest and most powerful unit as part of our salon units, the Salon Pro 6 Ultra is a source capture air-purifying unit designed to capture chemicals, odors and particles associated with manicures and pedicures, before they become airborne. It's equipped with a deep-bed activated carbon filter, a superHEPA and ...
Manufactured by:Allerair Industries based inMontreal, QUEBEC (CANADA)
Engineered specifically for nail salons, the Salon Pro 5 Plus is a source capture air-purifying unit designed to capture chemicals, odors and particles associated with manicures and pedicures, before they become airborne. The Salon Pro 5 Plus is also equipped with a deep-bed activated carbon filter to provide nail salon patrons and employees with ...
Manufactured by:Allerair Industries based inMontreal, QUEBEC (CANADA)
Engineered specifically for nail salons that have a heavy concentration of chemicals that are known to be dangerous threat to your clients health. The Salon Pro 5 Ultra is perfect heavy duty air cleaning with a source capture hose designed to capture chemicals, odors and particles associated with manicures and pedicures, before they become ...
Manufactured by:Scentroid based inStouffville, ONTARIO (CANADA)
Introducing the Flux Capsule, Scentroid’s Odour Generation Chamber. This instrument is used to capture emissions from solid or liquid surfaces. It has been designed to ensure zero ...
Manufactured by:CON-V-AIR Solutions based inSainte-Julie, QUEBEC (CANADA)
Con-V-Air has worked closely with water treatment facilities to determine the needs and concerns of the industry. One such concern is the safe filling of sludge bins. Typically operators are required to rake the sludge in the bins to maximize the utilizable ...
Manufactured by:USP Technologies based inAtlanta, GEORGIA (US) (USA)
When applied to primary settled solids (prior to thickening/digestion), the effect of the PRI technology is two-fold: ...
Manufactured by:Curry Industries Ltd based inWinnipeg, MANITOBA (CANADA)
One of the world’s best (and easiest to use) sealing systems for greenhouses, water conservation, grain and silage conservation and more, Poly-Fastener is a product almost without limit. Made in Canada, Poly-Fastener by Curry Industries is the only way to approach your poly-sealing ...
by:Envirosuite Ltd. based inMelbourne, AUSTRALIA
Our cost-effective odour and H2S monitoring device designed to collect actionable data at industrial operations to support 24/7 proactive emissions management with EVS Omnis software. ...