Show results for
Refine by
Applications
- Gas detection analyzers solutions for oil & gas industry
- Gas detection analyzers solutions for chemical & pharmaceutical processes industry
- Gas detection analyzers solutions for solvent based printing industry
- Gas analyzers and monitoring systems for Compliance measurements
- Gas Detection Solutions for monitoring process ovens, dryers & oxidizers
- Gas analyzers and monitoring systems for carbon capture & storage (CCS)
- Gas analyzers and monitoring systems for Raw gas measurements
- Gas analyzers and monitoring systems for aluminum production sector
- Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
- Gas analyzers and monitoring systems for Industrial hygiene
- Acoustic Spectroscopy for Nanotechnology Sector
- Acoustic Spectroscopy for Bio-Sciences and Pharmaceuticals
- Acoustic Spectroscopy for Ceramics Industry
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Lithium-Ion Battery Safety
- Gas detection analyzers solutions for pollution control industry
- Gas detection analyzers solutions for wastewater treatment industry
- Gas monitoring instruments and systems for semiconductor manufacturing
- Process analyzers & instruments for continuous emissions monitoring
- Gas analyzers and monitoring systems for Cement production
- Gas analyzers and monitoring systems for greenhouse gases from ruminants
- Gas analyzers and monitoring systems for fire & material testing
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas detection analyzers solutions for coil coating industry
- Gas detection analyzers solutions for pulp & paper mills industry
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Gas monitoring instruments and systems for stack testing
- Gas monitoring instruments and systems for stack testing according to EPA test method 320
- Gas analyzers and monitoring systems for waste incineration sector
- Gas monitoring instruments and systems for DeNOx process control
- Gas monitoring instruments and systems for engine emissions measurements
- Gas monitoring instruments and systems for nitric acid process
- Gas monitoring instruments and systems for process NOx measurement
- Gas monitoring instruments and systems for anesthetic gases
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for NOx emissions
- Mercury Analyzers for Mercury Monitoring Toolkit
Sampling Probe Equipment Supplied In Canada
230 equipment items found
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive ...
Manufactured by:Protea Limited  based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, thermocouple and ...
Manufactured by:Climet Instruments Company  based inRedlands, CALIFORNIA (USA)
Stainless Steel 1 CFM sample probes mitigate > 5.0 μm particle loss from tubing providing higher accuracy and assurance. Includes isokinetic probe, bulkhead fitting (for various wall thickness), and clamp for sanitary fittings. Need a custom ...
Manufactured by:Climet Instruments Company  based inRedlands, CALIFORNIA (USA)
Particle Counters: Isokinetic probes & Light Blocking isokinetic probes for Climet particle ...
Manufactured by:AMS, Inc.  based inAmerican Falls, IDAHO (USA)
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3443 is a customized version of an JCT Dilution Probe (Model JES-301). JCT probes are well-known for their dependability and ease of servicing. The probe incorporates a non-corrosive heated, replaceable Teflon filter element. The filter element is mounted in an electrically heated stainless steel housing covered by a thermal isolated weather protection enclosure. Temperature ...
Manufactured by:AMS, Inc.  based inAmerican Falls, IDAHO (USA)
EZ-Eject Soil Probe Handle, 3/8" ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
Tekran manufactures CVAFS mercury analytical systems for a wide range of industrial applications including coal-fired power plants, cement manufacturing, steel production, and incineration applications. The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-AIR Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Tekran Series 3400 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and calibration functions. Both types of air should be dry, oil free and particulate ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3425 Elemental & Oxidized Mercury Calibrator provides NIST traceable calibration gas for system calibration. The 3425 is an added, programmable calibration gas source that complements the standard calibration gas source already installed inside the 3400 HgCEMS, necessary to comply with USEPA and other government ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
This heated zone is critical to ensure quantitative transfer of mercury species to the 3400 system while maintaining the same speciated mercury fractions that are present at the sample probe ...
Manufactured by:A+ Corporation, LLC.  based inGonzales, LOUISIANA (USA)
Liquid is the root of many problems when sampling natural gas, either by its condensing out of the sample gas after entering the sample system or carrying over from the pipeline into the probe. Entrained liquid is not always easy to locate. Sometimes it cannot be detected by sight, but, instead, by its impact on analysis or ...
Manufactured by:Enotec GmbHÂ Â based inMarienheide, GERMANY
The explosion-proof COMTEC 6000 GasEx analysis system reacts immediately to changes in flue gas composition and is ideal for safe and accurate measurements of oxygen and CO2 in refineries or similar areas with a risk of explosion (Gas Ex Zones 1/2). The ATEX certifications (II 2G Ex db IIC T3 Gb), successfully completed by a German testing institute, apply to all analyzer components, ...
Manufactured by:AMS, Inc.  based inAmerican Falls, IDAHO (USA)
The only soil probe that features our Hex Quick Pin connection. Hex Quick Pin is a hardened steel male/female connection that accepts standard 3/8" snapper pins or heat treated U-clips. It is stronger and faster than standard threaded connections. Kit weighs ...
Manufactured by:AMS, Inc.  based inAmerican Falls, IDAHO (USA)
This Hammer-Head Soil Probe Kit features a hammer-head cross handle which can be hammered on with the included impact absorbing dead blow hammer. No need to lug around a heavy slide hammer anymore! A standard 10" cross handle also comes in the kit for regular soil conditions. The soil probe measures 7/8" X 33" and is constructed of nickel-plated chromoly. The hammer-head cross handle is made of ...