Show results for
Refine by
Accelerometer Equipment Supplied In China
113 equipment items found
Manufactured by:Industry News Technology (Shenzhen) Co., Ltd. (MAS) based inShenzhen City, CHINA
The MAS-ZD-A01 accelerometer (shown in Figure 1-1 below) is a capacitive vibration sensor. The utility model has the advantages of small size, light weight, low frequency characteristics, high resolution, large dynamic range, and convenient use, and is applicable to the fields of bridge vibration monitoring, cable tension monitoring, blasting vibration monitoring and motor ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
A generic range of lightweight, Konic shear® sensing element based vibration transducers offering a choice of tapped base stud mount or flat based adhesive attachment and each with side or top mounted connector. All welded construction maximizes temperature range and reliability. Adhesive mounted versions - Abrasive cleaning of the attachment face will reduce base thickness over time; sparing ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Larson Davis offers a selected range of measurement accelerometers optimized for use with the HVM200 Human Vibration Monitor. They cover the complete range of applications including Hand-arm, Whole-body, and Glove Transmissibility ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
Designed to operate continuously at 180°C (356°F) to meet the toughest environmental requirements, the wide 0.3Hz to 10 kHz frequency range and low weight of Triaxial CCLD Accelerometer Types 4527 and 4527-001 make them equally suitable for use as general purpose accelerometers. When only a single- or dual-axis measurement is needed, these ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The Konic shear® sensing element of the A/22 incorporates a mechanically isolated central sleeve that comprises part of the transducer casing, thus providing an annular through hole for attachment. The feature allows 360º connector orientations and minimizes height, thus facilitating installation. In addition all welded construction and total absence of epoxies maximizes reliability and ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
Sub-miniature, all welded, Konic shear sensing element based vibration transducer. The low mass of the A/25/E renders its transparent in the vast majority of light weight structure vibration measurement applications. The A/25/E is adhesive mounted. A detachment tool is provided to shear adhesive joints. Shock removal is to be avoided as being deleterious to the integrity of the transducer. ...
Manufactured by:Metrix Instrument Co., based inHouston, TEXAS (USA)
General purpose accelerometer that meets API 670 requirements. Designed for use on a wide variety of machine types with its broad frequency response of 0.5 to 10 kHz (+/- 3dB), 50g range, and mounted resonance of 13 kHz. A built-in amplifier provides an industry-standard 100mV/g low-impedance, constant-current output that is compatible with vibration monitoring systems, ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The A/24/E range of accelerometers are miniature adhesive/stud mount PE charge output accelerometers, offering a small size and low mass of just 2grams. Using DJB’s unique Konic shear® ceramic design offering superior cross axis control and performance, the low mass of the A/24 range minimizes mass loading effects in a wide range of vibration responses ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
Lightweight triaxial vibration transducer compromising three Konic shear® sensing elements all welded inserts bonded orthogonally into hard anodized aluminum housing. All the 3x10/32 Microdot connectors are exiting in the same direction. The inserts are electrically insulated, individually and from the housing, thus eliminating ground loop interference. The additional mechanical isolation ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
A lightweight general purpose PE charge output tri-axial vibration transducer comprising of three charge output Konic Shear® piezoelectric sensing elements mounted orthogonally within a titanium block with fully welded construction. The AT/04 is one of only 3 PE charge output single connector accelerometers in the world, all produced by DJB Instruments. This is possible due ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
Lightweight triaxial vibration transducer compromising three Konic Shear® sensing elements all welded inserts bonded orthogonally into hard anodized aluminum housing. The inserts are electrically insulated, individually and from the housing, thus eliminating ground loop interference. The additional mechanical isolation implicit in the construction provides near elimination of strain induced ...
Manufactured by:DEWESoft based inTrbovlje, SLOVENIA
Single axis, triaxial accelerometers and impulse hammers for vibration measurement and structural modal analysis. Angle sensors are perfect complementary sensors for applications like order tracking. ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
High output together with minimal susceptibility to strain induced error extends the measurement range of the A/21 down to the 10-5g, 10-1Hz region. The A/21 application area thus includes low level, low frequency dynamic analysis as occurs in the civil and marine engineering fields. The KONIC shear® sensing element, all welded construction, and total absence of epoxies and soldered ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The A/123 range of Piezo-tronic IEPE accelerometers features the Konic Shear® design sensing element, packaged to offer a choice of side/top entry connectors. Mounting options include flat base (for adhesive mounting) in addition to tapped base versions and isolated base versions with integral ceramic bases. Ideal for applications requiring a low mass, compact design for ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The A/29 is a robust and highly sensitive lightweight accelerometer which is able to withstand high temperatures in excess of 250°C. This makes the A/29 is an ideal candidate for any application requiring high sensitivity measurements with very little margin for error. Close tolerance 100pC/g normalized output accelerometers with ultra low strain induced ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The A/28/E is the world’s smallest piezoelectric fully welded stainless steel accelerometer. This ultra-miniature piezoelectric vibration transducer provides virtual transparency when applied to the lightweight structures, allied to relative freedom from strain induced error. A/28/E incorporates a mechanically pre-loaded shear plate sensing element. ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
Clearly taken to the limit, noise degradation overrides signal increase, hence these products are largely a compromise between signal/noise and mass/size. This Accelerometer is also available as an IEPE version -A1600. ...
Manufactured by:DJB Instruments (UK) Ltd based inSuffolk, UNITED KINGDOM
The A/800 is the highest sensitivity accelerometer in the DJB range. Using multiple shear plates and large masses the 9000pC/g sensitivity makes it perfectly suited to seismic surveys and other micro g level measurement – virtual immunity to strain input side effects provides guarantee of low frequency, measurement integrity. ...
Manufactured by:Ericco Inertial Technology based inXi 'an, CHINA
ER-QA-03A High Performance Quartz Accelerometer with high reliability is mainly used in inertial measurement and test systems in the aerospace and aviation fields. It can carry out static test and dynamic test, which is a standard vibration ...
Manufactured by:Senther based inShenzhen City, CHINA
The 912A Accelerometer is designed for laboratory standard applications and provides CNAS traceable calibration. It features a hermetic seal and delivers ultra-stable output with a wide frequency response. These characteristics make it particularly suitable for precision measurements and testing environments where reliable and consistent data is required. The ...