Show results for
Refine by
Xprt Equipment Supplied In Congo
19 equipment items found
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Rov perseo gtv my2018 for visual and instrumental inspections. ...
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Specializing in the marine environment, Datawell developed the basic principles of the gravity stabilized long period motion sensors. That, in combination with designs for very low power electronics, resulted in the Waverider® (1968), the Wavec buoy (1983) and Directional Waverider® buoy ...
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Flux-gate compass unit with solid state rate gyro sensor featuring high azimuth stability; electronic depth sen-sor. Standard functions: Auto-heading and Auto-depth. Auto-altitude function available on request, when altimeter sensor is ...
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Modular Chassis manufactured in high impact resistantPolypropylene. This material is totally maintenance-free and non-corroding. Pressure housing in anticorrodal aluminium ...
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Modular Chassis manufactured in high impact resistant Polyethilene, totally maintenance free and non-corrod-ing. All chassis members can be easily replaced and any additional equipment may be bolted directly onto. Stainless steel load frame and lift points. Pressure housing manufactured in Anticorodal Aluminium ...
Manufactured by:Lighthouse SpA based inLocalità Ponte Ronca, ITALY
Modular Chassis manufactured in high impact resistant Polypropylene, totally maintenance-free and non-corroding. All chassis member can be easily replaced and any additional equipment may be bolted directly onto it. Pressure housings are in anticorodal aluminum ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The Advanced Sensors X-One is the next generation of its incredibly successful EX range of analysers for oil in water measurements. It expands on 15 years’ of design, manufacturing and service of process analysers into the harshest of environments; to deliver a new range of analysers that measure Oil in ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX rated WiO-300S series is a Water Cut analyser that measures the amount of water in oil to high levels of accuracy. Water Cut is also referred to as Water in Oil, BS&W, OWD or WFM. The smart sensor technology uses a capacitive method to measure the percentage of water contained within the sample, with a large measurement range from a few 100ppms to 100% water.* The WiO-300S sensor is a ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
Fluorescence is a long established measurement technique and the most widespread technique for measuring oil in water. The measurement principle is based upon a physical characteristic of aromatic hydrocarbons. When exposed to UV or low blue light, the aromatic hydrocarbons absorb the energy from that light (excitation) and give off light of a different wavelength (emission). The amount of ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The Advanced Sensors microscopy, or video imaging, solution uses a digital camera with a magnification lens to capture images of produced water. The images are processed to find objects of interest such as oil droplets, solids and gas in water. The information gathered provides details such as the number and size of the various particles in the water. This information is called the ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX-400M is a side stream unit that uses video microscopy to measure concentrations of oil in water, Total Suspended Solids (TSS), oil droplet size and gas bubble size, whilst still taking advantage of patented self cleaning technology to keep fouling from impacting the data ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX-100M is a side stream oil / particulate in water analyzer that combines video microscopy measurement for particle size analysis with the highly accurate Laser Induced Fluorescence oil content measurement technique. This allows measurement of Total Suspended Solids (TSS), oil droplet size and gas bubble size whilst still accurately measuring concentration of oil in water. In addition to the ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
Deep UV Fluorescence allows for the measurement of light hydrocarbons and condensates. For the measurement of hydrocarbons in water LIF laser induced fluorescence is the normal go to method. While laser induced fluorescence can measure crude and heavier oils with significant accuracy, lighter more refined oils will have limited success. The reason for this, is that lighter oils which are often ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The Advanced Sensors S-One is the next generation of our incredibly successful range of analysers for oil in water measurements. It expands on 15 years’ of design, manufacturing and service of process analysers into the harshest of environments; to deliver a new range of analysers that measure Oil in ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX rated WiO-300K series is a Water Cut analyser that measures the amount of water in oil to high levels of accuracy. Water Cut is also referred to as Water in Oil, BS&W, OWD or WFM. The smart sensor technology uses a capacitive method to measure the percentage of water contained within the sample, with a large measurement range from a few 100ppms to 100% water.* The WiO-300K sensor is a ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX rated WiO-300P series is a Water Cut analyser that measures the amount of water in oil to high levels of accuracy. Water Cut is also referred to as Water in Oil, BS&W, OWD or WFM. The smart sensor technology uses a capacitive method to measure the percentage of water contained within the sample, with a large measurement range from a few 100ppms to 100% water.* The WiO-300P sensor is an ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
Spectroscopy is the study of the absorption and emission of light and other radiation by matter, concerning the dependence of these processes on the wavelength of the radiation. This technique can be used in oil detection as different particles absorb and/or emit light of different wavelengths and so it is possible to differentiate between oil types using a spectrograph. ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The principle measurement techniques used for on-line continuous measurement of produced water are video microscopy and fluorescence. Both these techniques use optical measurements and as such are prone to fouling. Traditional methods of cleaning include use of surfactants, chemicals, back flushing with water and even manual cleaning – all requiring operator intervention and/or ...
Manufactured by:Advanced Sensors Ltd. - part of PAC L.P. based inCarrickfergus, UNITED KINGDOM
The EX-100/1000 is a side stream Oil in Water analyzer that uses fluorescence to provide continuous accurate measurements of oil concentrations in water. Reliable real-time data enables operators to take accurate discharge measurements and to improve efficiency of separation processes enabling cost reductions. In addition to the EX-100 features, the EX-1000 model offers spectral ...