- Home
- czech republic
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Water treatment solutions for cooling water treatment
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
Xprt Equipment Supplied In Czech Republic
9,481 equipment items found
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:R + B Filter GmbH based inLangenbrettach-Langenbeutingen, GERMANY
520-498 mm Filter Panel : Resilient to large concentrations of dust. Efficient cleaning thanks to the flow-optimized head. High mechanical resilience due to robust construction. Long service life. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
884 Professional VA manual for MME is the entry-level instrument for high-end trace analysis with voltammetry and polarography with the Multi-Mode Electrode pro or the scTRACE Gold. The proven Metrohm electrode methods in combination with a completely new design of potentiostat/galvanostat and the extremely high-performance viva software opens up new perspectives for the determination of heavy ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
High-end titrator with built-in buret drive. Includes OMNIS standalone license, 801 Stirrer magnetic stirrer, 20 mL exchange unit and combined "Ecotrode plus" pH glass electrode. Dynamic (DET), monotone (MET), end point titration (SET), Karl-Fischer Titration (KFT). Four MSB connectors. Optional second buret for titration. A galvanically isolated measuring interface (also for intelligent ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman NxG 785S is ideal for analysts needing detailed spectral data on complex materials. Designed for accuracy, it provides high spectral resolution over a wide Raman spectral range from 100–3350 cm⁻¹. Whether you're working in pharmaceuticals, polymers, or advanced materials, the 785S provides the clarity and versatility needed to elevate your QC measurements with greater ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Extraction rates from 400 to 4,000 l/h. The metering system Ultromat ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The GLS Sampler CIC (TEI) is used to analyze liquid gas or gases under increased pressure using Combustion IC. It can be used in combination with either the manual or the automated Liquid Introduction Module for the Combustion Oven ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman Duo is a dual-laser Raman system that captures a wide spectral range with one spectrometer and sampling probe. It uses a 1064 nm laser to measure the fingerprint region (100–2500 cm⁻¹), providing accurate chemical details while reducing fluorescence interference. Additionally, an 860 nm laser covers the stretch region (2500 - 4600 cm⁻¹), allowing detection of specific ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
NET 150 trickle packs are high-performance fills providing an optimized pressure drop. Brentwood offers a unique flexibility in sizes for this product type. NET 150 is used in poor-water applications in both counterflow and crossflow cooling towers. ...
Premium
Manufactured by:Brentwood Industries, Inc. based inReading, PENNSYLVANIA (USA)
Solid idler sprockets slide onto stub shafts for quick and easy installation and are held in place with retainer plates. The integrally molded chain-saver rim decreases chain and sprocket ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Disposable screen-printed electrodes made of platinum for the 910 PSTAT mini, diameter working electrode 4 mm. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 890 Titrando is a high-end titrator for volumetric Karl Fischer titrations. The instrument is equipped with a built-in buret drive, four MSB connectors, a galvanically separated measuring interface and a USB connector. The tiamo™ light titration software for controlling the Titrando, the 803 Ti Stand and a 10 mL exchange unit are included in the scope of ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Ion chromatography for everyone! The Eco IC is the entry into ion chromatography at a very affordable price. The instrument is particularly suitable for water analysis in routine operations and for training purposes at schools and universities. Included in the scope of delivery are the conductivity detector, the Metrohm Suppressor Module ("MSM") and the software. Later automation for up to 36 ...