Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Heat transfer products solutions for the industrial refrigeration sector
- Ultrasonic instrumentation for solid level and flow applications
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Upstream and Downstream Oil and Gas Monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Ultrasonic instrumentation for liquid level and flow measurement applications
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Ultrasonic Instrumentation for Lagoon Level Applications
- Water level sensors for irrigation tanks and systems
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Ultrasonic Instrumentation for Tank Level Monitoring and Control Applications
- Ultrasonic Level and Flow Instrumentation for Fish Hatchery & Processing Applications
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Ultrasonic Instrumentation for Open Channel and Pipe Flow Monitoring Applications
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for metals
- Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
Xprt Equipment Supplied In Denmark
12,745 equipment items found
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The CS Dust Filter Cartridge, also known as Dust King Filter Cartridge, is a high-performance filter cartridge for mobile and stationary dust collectors. The CS Dust Filter Cartridge is particularly effective for industries handling large dust particles, for example woodworking. Compatible with various dust collection systems, the CS Cartridge features a durable polyurethane top cap and a ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
The Saturn Grizzly M-80 is a size reduction grinder system utilizing a unique staggered knife single rotor design. This durable industrial rubber granulator is easy to maintain and provides incredibly clean rubber and separated steel when processing tires. The Grizzly's unique rotor construction and proprietary blade material allow the greatest size reduction for your materials while minimizing ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The MAC500s UL model has steel lattices attached to make you get a safe air purification in your home or office. It can also be mounted on the wall. The UL model offers the same air purification treatment as the original model. Reduce virus and bacteria with up to 99,9% within 3 ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
GQ process gas blowers are ideal for use in steel plants for the compression of process, cooling, and seal gas. These blowers are often used as 2-stage units and are up to the most extreme challenges. Designed for multi-year continuous operation, GQ blowers are the preferred solution for process and cooling gas applications in iron direct reduction ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Effective protection for maximum performance. Filter cartridges are critical for protecting gas turbines and turbomachinery from airborne contaminants to ensure their efficient operation and extend their service life. Our filtration solutions are designed to meet the stringent requirements of different environments, trapping particles before they can penetrate and damage sensitive machine ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The double-stage air compressors of the DS series compress absolutely oil-free in accordance with ISO 8573-1, class 0 and guarantee outstanding performance in almost all application areas at differential pressures between 5.5 and 10.5 bar. A compact plug-and-play solution for your processes - not just for sensitive scopes of ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Highly versatile, durable, and adaptable cartridge type suitable for industrial applications. DIN cartridges are the most commonly used filter cartridges for air filtration and dust removal systems. The use of high-quality components, such as steel caps and bottoms, makes this design extremely robust. Assembly takes place via the raw gas side using a centrally arranged rod, thus ensuring perfect ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
Airborne and surface microorganisms are effectively treated using UV-C technology. This system inactivates bacteria such as E.Coli by disrupting their DNA, preventing replication and reducing contamination risks in air handling and enclosed environments. Unlike chemical disinfection methods, UV-C provides continuous, chemical-free E.Coli control where conventional air treatment is impractical or ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
When it comes to versatility, the compressors in the Delta Screw series exceed all expectations. The truth is that AERZEN’s flexible and highly efficient units offer the widest variety of models available today. The largest number of possible modifications. And the broadest range of accessories. In other words: the right compressor for all process ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The MAC500s UL model has steel lattices attached to make sure you get a safe air purification inyour home or office. It can also be mounted on the wall. The UL model offers the same air purification treatment as the original model. The MAC500s is original without steel lattices attached. MAC500s makes a healthy indoor climate in your home or office. The MAC500s offers the same air purification ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Compact & efficient dust filtration with maximised filter area surface. The Double Conical filter cartridge, also known as the Multicell filter cartridge, is designed for compact dust collectors to provide clean air for process and product integrity as well as workplace safety. Our double conical filter cartridge is ideal for dust collectors in applications such as sandblasting, welding fume ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Enhanced filter performance by adding strength and improved airflow. Dimpling technology creates small, evenly spaced indentations on the filter media surface to improve dust cake release, airflow, and filter longevity. These dimples reduce contact between the media and the dust cake, minimizing clogging and allowing for better air flow. Dimpling also prevents pleat pinching—where pleats ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Durable, high-performance pleated bag filter for industrial applications. Bottom Loader Pleated Bag Filters are designed to improve industrial dust collection systems by enhancing dust capture and reducing emissions. Their pleated design increases the surface area, which improves filtration efficiency while maintaining a compact size. Soft polyurethane caps ensure a secure, airtight seal, ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
The MAG-VIEW series operate on the magnetic inductive principle. The complete absence of moving parts, its interference free operation and the insensitivity with contaminated liquids, makes this magnetic flow meter the perfect solution even in compact machines with cramped ...