Refine by
Air Diffuser Equipment Supplied In Denmark
16 equipment items found
Manufactured by:Midtjysk Akva ApS based inFredericia, DENMARK
Material: perforated rubber. Used for e.g. annular combustion ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Diffuser cover made of reinforced polypropylene. Diffuser designed for many various operating conditions: Ideal for Fibre Loaded Sludge, Effluents containing Grease, and Chemical Based wastewater ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Polypropylene feeder for grids in bioreactors and degreasing tanks. Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Designed for aeration of Activated Sludge Basins in Municipal and Industrial Wastewater Treatment plants. The AQUATUBE® specific design prevents sedimentation and Optimises Mixing and Oxygen Transfer. The AQUATUBE® 90 is designed to be installed on DN100 stainless steel pipe or DN110 PVC using simple fastening system. The AQUATUBE® 70 can be installed on square stainess-steel ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
IS air inlets are designed to be used as ceiling or roof inlets in livestock structures. The patented Star Diffuser ensures that the incoming air stream is accurately controlled and radially distributed to create a uniform climate inside the structure. During cold periods, the cold incoming air should be heated before it makes ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
IS air inlets are designed to be used as ceiling or roof inlets in livestock structures. The patented Star Diffuser ensures that the incoming air stream is accurately controlled and radially distributed to create a uniform climate inside the structure. During cold periods, the cold incoming air should be heated before it makes ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The Modular S Centrifugal Pump represents one of the most distinctive products of self-priming pumps. On the basis of 50 years of experience in the production of self-priming pumps we produce a pump series that meets the future demands for economical and reliable pumps. The Modular S is widely used within different applications and markets. ...
Manufactured by:D`Alessandro Termomeccanica based inMiglianico (CH), ITALY
Three-ways smoke hot air generator; Generator shell and tubes nest in stainless steel like all the other surfaces in contact with high temperatur; Doors for internal inspections and boiler cleaning; Cast iron burner with mechanical feeding system; Hopper for the combustible materials; Variable speed screew for automatic feeding; Primary and secondary combustion ...
Manufactured by:D`Alessandro Termomeccanica based inMiglianico (CH), ITALY
Three-ways smoke warm air generator; Generator shell and tubes nest in stainless steel like all the other surfaces in contact with high temperatur; Doors for internal inspections and boiler cleaning; Cast iron burner with mechanical feeding system; Cylindrical combustible feeding hopper with mechanical stirrer; Variable speed screew for automatic feeding; Primary and secondary ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Large diffuser surface - compactly installed. AEROSTRIP Modules combine the high performance of the strip diffuser with the quick and easy assembly of the plate diffuser. The AEROSTRIP modules are available in lengths of 2 - 4 meters and a width of 1 meter. Compared to other systems (plates, tubes, strips), modules have a significantly larger area, which means that less effort is required for ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), diffusion caps offer a simple to ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
The POD Sampler (POcket Diffusive Sampler) is a radial diffusive sampler for volatile organic compounds (VOCs), compatible with analysis by thermal desorption. Developed in partnership with pioneers in radial sampling at the Joint Research Centre of the European Commission the POD Sampler’s design results in exceptional performance. Compared with conventional (axial) samplers, radial ...