Refine by
Electrical Engineering Equipment Supplied In Denmark
25 equipment items found
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Manufactured by:CLENA High Pressure Systems A/S based inTistrup, DENMARK
Simple and practical build high pressure cleaner. Constructed in a mobile trolley frame. Mounted with electric or gasoline engine. HAWK pumps with ceramic pistons. Easy to operate and maintain. Long lifetime – low ...
Manufactured by:IHFood A/S based inCopenhagen N, DENMARK
IHFood is a multidisciplinary company employing a wide range of technologies. Our aim is to assist or replace human inspection of organic material where it makes sense. Our engineering team consists of experienced developers with backgrounds in optics and light, image acquisition, electrical engineering, software development, robotics and machine ...
Manufactured by:Jydeland Maskinfabrik A/S based inEbeltoft, DENMARK
A fast and efficient self-loading spreader for medium-sized herds which, can optionally be delivered with either a diesel engine or electric motor. The spreader can also be produced in a hot galvanized ...
Manufactured by:Alvac A/S based inHolstebro, DENMARK
ALVAC 1600 Flex is a vacuum lifting machine with a maximum load capacity of 160 kg. The main post is flexible in four directions and a tilting steering rod is included. Equipped with quick connector for changing suction plates in ...
Manufactured by:HSM GmbH Co. KG based inFrickingen, GERMANY
The mobile baling press HSM V-Press 60 compresses plastic film and lightweight packaging material right where the material ...
Manufactured by:Jydeland Maskinfabrik A/S based inEbeltoft, DENMARK
The spreader is equipped with a LED headlight which makes it easy to drive around the clock. Our Promax is available in 1 WD or 3 WD and can be installed with a diesel engine or electric motor. The spreader can also be produced in a hot galvanized ...
Manufactured by:WillBrandt Gummitechnik KG based inHamburg, GERMANY
WILLBRANDT shock absorbers are used for protection from severe shock and provide high isolation against structure borne noise. Type SES 6000 was designed for very heavy loads, up to 25,000 ...
Manufactured by:HYTOR Group A/S based inEsbjerg , DENMARK
On-site tool calibration saves you time, money, and hassle. The advantage is that the tool can stay where it is and be calibrated immediately. Should there be a need for service or repair, we naturally take care of that at the same time. Our on-site calibration container is a state-of-the-art workshop container that meets all calibration requirements and makes your daily life ...
Manufactured by:Stjernholm A/S based inRingkøbing, DENMARK
The daum screen from Stjernholm concentrates separated sludge from 0.5% dry matter to more than 12% dry ...
Manufactured by:Hako GmbH based inBad Oldesloe, GERMANY
Cost-effective and efficient: The Sweepmaster 900 R provides professional sweeping results at all times. This ride-on vacuum sweeper is particularly manoeuvrable. This, in combination with its high sweeping performance of up to 7,200 m²/h, makes this Sweepmaster the ideal solution for cleaning medium-sized areas. Thanks to its heavy-duty design, this machine is particularly robust and suited ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
DESMI has an extensive product range of mobile and stationary diesel-driven pump units. These pump units are made to comply with the demands of the marine industry as regards materials, design, and ease of handling. All DESMI’s mobile pumps are in compliance with the Danish Maritime Authority’s requirements for portable emergency fire pumps in fishing and cargo vessels together with ...
Manufactured by:Jydeland Maskinfabrik A/S based inEbeltoft, DENMARK
A fast and efficient spreader that is suitable for narrow barn aisles. The spreader can be supplied with either a diesel engine or an electric motor. Available in hot galvanized where various tools can be purchased. Read more about our ...
Manufactured by:Jydeland Maskinfabrik A/S based inEbeltoft, DENMARK
You can use the spreader as a small feed mixer cart. The spreader is suitable for medium and large crews and can be supplied with either a diesel engine or an electric ...
Manufactured by:Marel Water Treatment B.V. based inBoxmeer, NETHERLANDS
In this process dissolved and suspended carbohydrates, fats and proteins are converted into CO2 and methane. This (bio) gas can be used as a fuel for amongst others boilers and dual fuel engines to generate ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
The Finn MBL1 material blower is our most compact, entry-level soil and mulch blower designed for contractors and landscapers ready to move on from the manual labor of wheelbarrows and hand spreading. Built specifically for residential and light commercial mulch projects, the MBL1 gives you professional-quality mulching in a simplified, cost-effective package that brings our dependable Finn ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
The FINN B40 brings mulching ease to small landscaping operations. You save time and energy by eliminating tedious and time consuming hand mulching, and the quality and coverage are far superior to that of traditional methods. Using the B40 Straw Blower can guarantee a faster and more uniform growth over larger areas. And because the unit is both self-powered and portable, it’s easy for you ...
Manufactured by:UMP Technika based inUkmerge, LITHUANIA
UB180 sawdust bunker and filling hopper houses up to 2.8m3 of sawdust and supplies it to a single, or twin BP500A briquette press systems to ensure their maximum efficiency. Our system uses a 0.9kW electric engine which is both efficient and reliable. The bunker is designed to be placed on top of existing briquette presses to save up valuable floor ...
Manufactured by:COMET S.p.A. based inReggio, ITALY
Parts in contact with spray liquid: AISI 316-L stainless steel, polyamide (standard versions), polypropylene (acid version). Standard: regulation valve. Can be fitted directly to electric engine and to gas engine with reduction ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Using Royal Eijkelkamp's diverse rig building experience, the Boxed Crawler CPT100 is designed to provide optimal production, ergonomic operation, low running costs and has several stand out features such as being rail track ...