Refine by
Inline Pump Equipment Supplied In Denmark
27 equipment items found
Manufactured by:Grundfos based inBjerringbro, DENMARK
Grundfos TP, TPE pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and for applications such as heating/cooling/district energy/hot water recirculation. The pumps are with either fixed speed motors (TP/TPD) or speed controlled motors (TPE/TPED/TPE2/TPE2 D/TPE3/TPE3 ...
Manufactured by:Grundfos based inBjerringbro, DENMARK
Grundfos TP pumps are single-stage, close-coupled in-line centrifugal pumps with mechanical shaft seal and primely for applications such as heating/cooling/district energy. The pumps are fitted with fixed speed ...
Manufactured by:SonFlow A/S based inKolding, DENMARK
DanPumps offers a range of high-efficient inline pumps. The inline pump is one of the most used type of pumps in many different market segments such as marine, general industry, HVAC, fish farming and firefighting systems - the best pump choice for lower viscosity (thin) liquids and high flow ...
Manufactured by:Paratech Inc. based inFrankfort, ILLINOIS (USA)
All of PARATECH's Dual Deadman Controllers, Single Deadman Controllers, Pressure Regulators, Working Air Carts, Manual Compressors (foot pumps), Inline Relief Valves, couplings, nipples and fittings are designed and manufactured at PARATECH, Designed for durability in all kinds of environments, MAXIFORCE Control Equipment is available in kits or as individual ...
Distributed by:Lykkegaard A/S based inFerritslev, DENMARK
A new generation of compact in-line pumps has been developed during the past 10 years. These pumps are a strong alternative to the classic vertical pumps and have the same low energy consumption and high reliability as the classic vertical pumps. The pump is placed outside the sump and is very compact and easy to transport and install. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
A selection of in-line pumps available from stock, delivery time max. 6 working days DESMI 48 offers: Delivery from European and Asian distribution centres. Reduces maintenance and down-time. Upgrading for higher efficiency. ...
Manufactured by:IRON Pump A/S based inSoeborg, DENMARK
The IRON Pump A/S propeller pump series QTe is primarily operating on heeling duties with large capacities, low heads and two-way ...
Manufactured by:IRON Pump A/S based inSoeborg, DENMARK
The QT pump series is especially designed for applications where heavy capacities, low pressure heads and two-way operation are of vital importance. The pump, focused for heeling duties in the marine sector, is also well suited for condenser cooling ...
Manufactured by:IRON Pump A/S based inSoeborg, DENMARK
The QH pump series is a range of horizontal, in-line, axial split, centrifugal pumps of single or multi stage design. The design provides easy access for inspection and service without disturbing the rotating element, the motor/driver or surrounding pipe system. The pump series, designed for high efficiency and low NPSH under heavy and continuous duty, features a “between bearing“ ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DESLUBE series is a submerged deep well pump designed for Main Engine Lubrication oil supply for especially large two-stroke engines. The design is based on our long time experience of manufacturing deep-well pumps as well as the design features from our in-line centrifugal series. The pump is placed in the tank sump supported by dome flange and requires no further suspension. The sturdy ...
Manufactured by:IRON Pump A/S based inSoeborg, DENMARK
Double acting piston pump for boiler feed, hydrophore, bilge, oily bilge, and other water supply service. Maximum discharge head: 14 kg/ cm2. Temperatures up to 100 degrees C. Certificate from any Classification Society ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The in-line DSL double suction centrifugal pump. The DSL pumps are single-stage, double-suction, vertical, centrifugal pumps. The design of the suction side provides for a perfect flow, and the inlet is placed in line with the outlet. Add to this the advanced double-suction impeller and the result is high efficiency and low NPSHvalues.The DSL series is widely used within different applications ...
Manufactured by:IRON Pump A/S based inSoeborg, DENMARK
The QV pump series is a range of vertical, in-line, axial split, centrifugal pumps of single or multi stage design. The design provides easy access for inspection and service without dismantling the rotating element, motor or the surrounding pipe system. A pump series designed for high efficiency and low NPSH under heavy and continuous duty, featuring a bearing arrangement on each side of the ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
High-efficiency In-line centrifugal pumps. The ESL Centrifugal Pump is designed for high efficiency, low NPSH and is installation and service friendly. The ESL is widely used within different applications and markets. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DSL pumps are high efficiency pumps in a cost effective construction used in the heavy industries. Pump concept: Single-stage, double-suction, vertical, centrifugal pumps. The design of the suction side provides for a perfect flow. The inlet is placed in line with the outlet. Advanced double-suction impeller. High efficiency. Low NPSH-values. Up to 4000 m3/h, pressure up to 40 ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
District Heating is an energy distribution network; that transports heated water generated in a centralised utility through piping to residential homes and commercial buildings primarily in urban areas. District Heating is clean, efficient and cost-effective due to its flexibility, scale of production and optimal heat generation conditions. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
DESMI’s NSL pump is a further development of the well-known SL pumps which have been supplied for marine and industrial applications for more than thirty years. ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
The FINN T170 brings a robust 1,500 gallon working tank capacity to tackle a wide array of projects with this economical, highly productive machine. The T170 is a state-of-the-art HydroSeeder offering the best value for your investment. The efficiency of operation, high production capabilities and low maintenance requirements make the T170 perfect for all mid-size to large work ...
Manufactured by:ION Science Ltd. based inRoyston, UNITED KINGDOM
OEM gas sensor with state of the art sensing technology. Only available from ION Science, the 11.7 eV gas sensor – MiniPID 2 extends the range of detectable compounds to include chlorocarbons, unsaturated fluorocarbons, formaldehyde, ethylene and methanol. The 11.7 eV gas sensor is virtually insensitive to humidity changes, providing unparalleled performance in a variety of ...
Manufactured by:ION Science Ltd. based inRoyston, UNITED KINGDOM
OEM gas sensor with state of the art sensing technology. Our PPM Wide Range sensor is designed for detecting VOCs over the widest dynamic range on the market without compromising performance. It is also the only PID sensor with a lamp out ...