Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Heat transfer products solutions for the industrial refrigeration sector
- Ultrasonic instrumentation for solid level and flow applications
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Upstream and Downstream Oil and Gas Monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Ultrasonic instrumentation for liquid level and flow measurement applications
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Ultrasonic Instrumentation for Lagoon Level Applications
- Water level sensors for irrigation tanks and systems
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Ultrasonic Instrumentation for Tank Level Monitoring and Control Applications
- Ultrasonic Level and Flow Instrumentation for Fish Hatchery & Processing Applications
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Ultrasonic Instrumentation for Open Channel and Pipe Flow Monitoring Applications
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for metals
- Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
Xprt Equipment Supplied In Denmark
12,749 equipment items found
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The CS Dust Filter Cartridge, also known as Dust King Filter Cartridge, is a high-performance filter cartridge for mobile and stationary dust collectors. The CS Dust Filter Cartridge is particularly effective for industries handling large dust particles, for example woodworking. Compatible with various dust collection systems, the CS Cartridge features a durable polyurethane top cap and a ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
The Saturn Grizzly M-80 is a size reduction grinder system utilizing a unique staggered knife single rotor design. This durable industrial rubber granulator is easy to maintain and provides incredibly clean rubber and separated steel when processing tires. The Grizzly's unique rotor construction and proprietary blade material allow the greatest size reduction for your materials while minimizing ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
One steel frame in 3 lengths, where it is possible to mount from 2 to 8 pcs. of UV-C lamps. Then the elements must be connected to a ballast box which secures that the lamps turn on and off correctly. The ballast box will be connected to the control board ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The MAC500s UL model has steel lattices attached to make you get a safe air purification in your home or office. It can also be mounted on the wall. The UL model offers the same air purification treatment as the original model. Reduce virus and bacteria with up to 99,9% within 3 ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The Aerzen Turbo with air bearings, have exerted a major influence on technological progress. Particularly compact turbo package for medium and high volume flows. Lowest maintenance and noise emission, no vibrations and highest energy efficiency. Easy installation thanks to a plug-and-play package that integrates all ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN vacuum blowers are provided with fluoro rubber (FKM) O-ring seals at the casing flanges. Further important advantages of the blower stage are vacuum tightness and air cooling. Lubrication oil is supplied by splash ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
HS Purifier forindustrial air cleaning use photolytical oxidation to purify the air from the gas, hydrogen sulfide (H2S). When the H2S level reduces significant, you will protect the electronic from the cabinet by the pump well. If the pump well is located close to a neighbor, then you also avoid neighbor complaints, because the odor is reduced significant. The HS Purifier is easy to install in ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The biogas compressor series VMY is an oil-injected screw compressor in 3 sizes for volume flows. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Highly versatile, durable, and adaptable cartridge type suitable for industrial applications. DIN cartridges are the most commonly used filter cartridges for air filtration and dust removal systems. The use of high-quality components, such as steel caps and bottoms, makes this design extremely robust. Assembly takes place via the raw gas side using a centrally arranged rod, thus ensuring perfect ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Antistatic media have been specially developed to dissipate static electricity and thus reduce the risk of explosion in environments with combustible dust. This property makes them particularly valuable in grain mills, for example, where fine dust particles can create hazardous conditions. They are also commonly used in powder coating applications, where they increase safety by preventing static ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Cellulose media made from natural fibers is a cost-effective solution that provides efficient filtration for general applications. They are particularly suitable for the wood processing industry, where they effectively capture wood dust and ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Durable, high-performance pleated bag filter for industrial applications. Bottom Loader Pleated Bag Filters are designed to improve industrial dust collection systems by enhancing dust capture and reducing emissions. Their pleated design increases the surface area, which improves filtration efficiency while maintaining a compact size. Soft polyurethane caps ensure a secure, airtight seal, ...