Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Heat transfer products solutions for the industrial refrigeration sector
- Ultrasonic instrumentation for solid level and flow applications
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Upstream and Downstream Oil and Gas Monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Ultrasonic instrumentation for liquid level and flow measurement applications
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Ultrasonic Instrumentation for Lagoon Level Applications
- Water level sensors for irrigation tanks and systems
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Ultrasonic Instrumentation for Tank Level Monitoring and Control Applications
- Ultrasonic Level and Flow Instrumentation for Fish Hatchery & Processing Applications
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Ultrasonic Instrumentation for Open Channel and Pipe Flow Monitoring Applications
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for metals
- Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
Xprt Equipment Supplied In Denmark
12,745 equipment items found
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
The Saturn Grizzly M-80 is a size reduction grinder system utilizing a unique staggered knife single rotor design. This durable industrial rubber granulator is easy to maintain and provides incredibly clean rubber and separated steel when processing tires. The Grizzly's unique rotor construction and proprietary blade material allow the greatest size reduction for your materials while minimizing ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The CS Dust Filter Cartridge, also known as Dust King Filter Cartridge, is a high-performance filter cartridge for mobile and stationary dust collectors. The CS Dust Filter Cartridge is particularly effective for industries handling large dust particles, for example woodworking. Compatible with various dust collection systems, the CS Cartridge features a durable polyurethane top cap and a ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The MAC500s UL model has steel lattices attached to make sure you get a safe air purification inyour home or office. It can also be mounted on the wall. The UL model offers the same air purification treatment as the original model. The MAC500s is original without steel lattices attached. MAC500s makes a healthy indoor climate in your home or office. The MAC500s offers the same air purification ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Corrugation of filter media is a technology to enhance the performance and durability of filter cartridges. It significantly reduces the pressure drop across the filter cartridge, which leads to improved cleaning characteristics. This technology stabilizes the pleats, ensuring they maintain their shape even under tough operating conditions. As a result, it lowers the general pressure drop and ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Pulse Jet 3 & 4 Lug cartridges, also known as Twist & Fix cartridges, are designed for a wide range of filtration applications to help prevent harmful dust emissions. They attach securely to the system using three or four lugs and can be installed from either the clean or raw gas side, ensuring a completely tight seal with the dust removal ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The single-stage, oil-free screw compressors in the Delta Screw Generation 5plus series are universal machines. They bundle all the know-how of a world market leader in compressor technology to offer you ‘the user’ maximum ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Mass Flow Regulator for gases with integrated display: Direct thermal mass flow measurement. High accuracy. Actual calibrated on Hydrogen H2. Bright, graphical OLED display. Digital or analog output; alarm and counter functions. High precision needle valve. ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nordic Air Filtration's Cylindrical Filter Cartridge is suitable for Gas Turbine air inlet housing. It can be equipped with any one of Nordic Air Filtration's high-quality filter media making it suitable for all operating environments throughout the world. The Cylindrical Filter Cartridge can be installed horizontally or vertically and can be used in pulsing or static systems. Our vast gas ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Ensure precision, durability, and performance in high-temperature and challenging environments with advanced banding sollutions. Banding is an essential aspect of our products, ensuring longevity, performance, and efficiency. Banding technology reinforces filter cartridges and pleated bags with bands that maintain shape and prevent collapse under pressure or high flow. Common banding materials ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
The MAG-VIEW series operate on the magnetic inductive principle. The complete absence of moving parts, its interference free operation and the insensitivity with contaminated liquids, makes this magnetic flow meter the perfect solution even in compact machines with cramped ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
The MAG-VIEW series operate on the magnetic inductive principle. The complete absence of moving parts, its interference free operation and the insensitivity with contaminated liquids, makes this magnetic flow meter the perfect solution even in compact machines with cramped ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Efficient silo ventilation with two bolt filter cartridges. The two bolt filter cartridges, also called WAM* Silo Venting Filter, is a versatile dust extraction filter designed for efficient dust collection in various industrial applications for safe working environments and efficient production processes. Developed to replace traditional filter bags and cages, this type of filter can be used in ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Efficient dust filtration with filter cartridges with three-block attachment. The Curly Bracket Cartridge, also known as 328NZ from Filtration Group* (formerly MAHLE Industrial Filtration), is a filter cartridge designed for both clean gas side and dirty gas side installation, effectively separating dust from gases. It helps create safe working environments and efficient production processes ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Power supply 100...240 Vac (50...60 Hz). Output 24V/0.625A (maximum 15W). Constant voltage, current limited. Continuously short circuit proof. Interchangeable plugs (Euro, UK, USA, Australian, IEC) for mains connection. RJ45 connector for instrument connection Cable length 2 m. ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
One steel frame in 3 lengths, where it is possible to mount from 2 to 8 pcs. of UV-C lamps. Then the elements must be connected to a ballast box which secures that the lamps turn on and off correctly. The ballast box will be connected to the control board ...