Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Heat transfer products solutions for the industrial refrigeration sector
- Ultrasonic instrumentation for solid level and flow applications
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Upstream and Downstream Oil and Gas Monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Ultrasonic instrumentation for liquid level and flow measurement applications
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Ultrasonic Instrumentation for Lagoon Level Applications
- Water level sensors for irrigation tanks and systems
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Ultrasonic Instrumentation for Tank Level Monitoring and Control Applications
- Ultrasonic Level and Flow Instrumentation for Fish Hatchery & Processing Applications
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Ultrasonic Instrumentation for Open Channel and Pipe Flow Monitoring Applications
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for metals
- Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
Xprt Equipment Supplied In Denmark
12,749 equipment items found
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
The Saturn Grizzly M-80 is a size reduction grinder system utilizing a unique staggered knife single rotor design. This durable industrial rubber granulator is easy to maintain and provides incredibly clean rubber and separated steel when processing tires. The Grizzly's unique rotor construction and proprietary blade material allow the greatest size reduction for your materials while minimizing ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The CS Dust Filter Cartridge, also known as Dust King Filter Cartridge, is a high-performance filter cartridge for mobile and stationary dust collectors. The CS Dust Filter Cartridge is particularly effective for industries handling large dust particles, for example woodworking. Compatible with various dust collection systems, the CS Cartridge features a durable polyurethane top cap and a ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
Airborne and surface microorganisms are effectively treated using UV-C technology. This system inactivates bacteria such as E.Coli by disrupting their DNA, preventing replication and reducing contamination risks in air handling and enclosed environments. Unlike chemical disinfection methods, UV-C provides continuous, chemical-free E.Coli control where conventional air treatment is impractical or ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN Positive Displacement Blowers have been manufactured since 1868 and today we are highly developed standard production machines designed and adapted to find use in a wide variety of applications and specialise in air and neutral ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The OZ series – OZ1000, OZ1000T and OZ2000 are air purifiers that purify and sanitize the surfaces with up to 99,84% within 1 hour. The air purifiers produce a higher level of ozone, which will give a more concentrated purification treatment. Remove mold, fungi and odor with the effective UV-C air purifier up to ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Polyester media made from spun polyester is extremely durable and is therefore suitable for demanding industrial environments. This type of media is often used in metalworking applications, where it captures oily mist and fine metal particles generated during machining and grinding processes. They are also ideal for food processing applications as they withstand frequent cleaning and prevent ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nordic Air Filtration's Cylindrical Filter Cartridge is suitable for Gas Turbine air inlet housing. It can be equipped with any one of Nordic Air Filtration's high-quality filter media making it suitable for all operating environments throughout the world. The Cylindrical Filter Cartridge can be installed horizontally or vertically and can be used in pulsing or static systems. Our vast gas ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
One steel frame in 3 lengths, where it is possible to mount from 2 to 8 pcs. of UV-C lamps. The frame will be connected to the control board (STO). In this model, the ballast is mounted in the ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Threaded filter cartridges are filter cartridges that ensure air purity, recover fine particles and maintain hygienic conditions. Our threaded flange filters are available in cylindrical and conical designs and can be seamlessly integrated into dust collection systems. Our cylindrical threaded filter cartridge can be fitted with our Starbottom technology, which prevents dust build-up and ensures ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The direct-drive GM-HP blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nordic Air Filtration's Conical and Cylindrical filter cartridge sets come in a variety of configurations: Conical/Cylindrical, Conical/Conical, and Cylindrical/Cylindrical and are ideal for gas turbine air inlet applications. These common configurations are primarily used in pulsing systems, but they can also be installed where the pulsing system has been disabled. The Conical and Cylindrical ...