Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Heat transfer products solutions for the industrial refrigeration sector
- Ultrasonic instrumentation for solid level and flow applications
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Upstream and Downstream Oil and Gas Monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Ultrasonic instrumentation for liquid level and flow measurement applications
- Heat transfer products solutions for the commercial HVAC cooling sector
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Ultrasonic Instrumentation for Lagoon Level Applications
- Water level sensors for irrigation tanks and systems
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Ultrasonic Instrumentation for Tank Level Monitoring and Control Applications
- Ultrasonic Level and Flow Instrumentation for Fish Hatchery & Processing Applications
- Activated carbon solutions for wastewater treatment plant industry
- Activated carbon solutions for groundwater remediation system sector
- Activated carbon solutions for drinking water treatment industry
- Activated carbon solutions for activated carbon exchange on site industry
- Activated carbon solutions for purification plant industry
- Activated carbon solutions for waste air treatment chemical industry
- Activated carbon solutions for sewage gas cleaning industry
- Activated carbon solutions for biogas treatment industry
- Activated carbon solutions for groundwater treatment construction site industry
- Activated carbon solutions for mobile environmental remediation industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Air pollution, emission and process monitoring systems for agriculture
- Ultrasonic Instrumentation for Open Channel and Pipe Flow Monitoring Applications
- Water monitoring for the environmental industry
- Air pollution, emission and process monitoring systems for metals
- Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
Xprt Equipment Supplied In Denmark
12,746 equipment items found
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The CS Dust Filter Cartridge, also known as Dust King Filter Cartridge, is a high-performance filter cartridge for mobile and stationary dust collectors. The CS Dust Filter Cartridge is particularly effective for industries handling large dust particles, for example woodworking. Compatible with various dust collection systems, the CS Cartridge features a durable polyurethane top cap and a ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The MAC500c has the same effect and function as the small air purifier MAC500s. Inside the MAC500c you will find a special UV-C lamp that does all the purification for you. The MAC500c has no filter, and you only have to change the lamp once a year (depends on running hours a day). ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
JIMCO Air-Cleaning System type FLO-K is used for a large number of different applications. FLO-K systems are manufactured and supplied for various tasks. Where the air temperature is less than 45 °C. The FLO-K system does not require a secondary air to cool the primary air to be treated. The process is called photolytic oxidation, which means the contaminated air is subjected to a combination ...
Premium
Manufactured by:Jimco A/S based inRudkøbing, DENMARK
The JIMCO industrial air purification systems are normally made according to client’s specific requirements. There are two main considerations when designing the air treatment system. The first step is to calculate the unit size to treat the air successfully. This is based on the process air organic content, air temperatures, air flowrates, grease, and odor destruction requirements, etc. ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Highly versatile, durable, and adaptable cartridge type suitable for industrial applications. DIN cartridges are the most commonly used filter cartridges for air filtration and dust removal systems. The use of high-quality components, such as steel caps and bottoms, makes this design extremely robust. Assembly takes place via the raw gas side using a centrally arranged rod, thus ensuring perfect ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Effective protection for maximum performance. Filter cartridges are critical for protecting gas turbines and turbomachinery from airborne contaminants to ensure their efficient operation and extend their service life. Our filtration solutions are designed to meet the stringent requirements of different environments, trapping particles before they can penetrate and damage sensitive machine ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The new Delta Hybrid direct driven sizes are the technological evolution of the AERZEN screw blower series. The future has just begun thanks to a super efficient newly designed stage with 3+4 rotors profile and a new drive concept for low pressure applications, a reduced footprint with side by side installation, a no-space adder Plug & Play solution with integrated starter, possibility to ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Mini Pleat technology is a filter enhancement that improves filtration performance through even pleat spacing. Strategically placed bonding keeps the pleats separated, preventing pinching or collapsing and maximizing media exposure to the airflow. As a result, the filter retains more dust while pressure loss remains lower. The technology also improves durability, ensures longer filter life and ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
CTS filter cartridges are air filters for the extraction of contaminants and ventilation of conveyor systems and other systems in industrial processes where air quality is crucial for safety and product quality. CTS filters are pharmaceutical-grade and food industry-compatible filters, ideal for industrial filtration applications in industries such as pharmaceutical manufacturing, food ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nanofiber media contain a fine layer of nanofibers to improve particle separation performance, especially for submicron particles. This makes them ideal for the industrial manufacturing sector, where highly efficient filtration is essential to remove fine dust, vapors and air pollutants generated in processes such as metalworking or chemical production. They are also used in electronics ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
When mineralizing organic matter in the sludge, 60-70 per cent of the dry matter is transferred into C02, oxygen, free nitrogen and partly dewatered soil particles. The sludge is dewatered, depending on the local climate, to a dry matter content of 35% to 60% within two to three weeks. In the long term the sludge will be reduced to 2-4% of the originally applied volume. This reduces management ...
Premium
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Low-Flow Vortex Flowmeter for Liquids: Fast response. Analog output (4-20 mA). Compact, light-weight, cost-effective construction. No moving parts; maintenance free. Low pressure drop. IP65 construction. ...