Show results for
Refine by
Applications
- Industrial monitoring solutions for the gas analysers areas
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Stack emissions monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Asphalt production - monitoring solutions for process optimization & energy saving
- Stack gas emission monitoring for the energy industry
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Measurement solution for organic vapour speciation
- Measurement solution for siloxane analysis
- Measurement solution for on-line carbon bed system
- Measurement solution for ambient air workplace monitoring
- Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry
- Measurement solution for formaldehyde FTIR measurement
- Industrial monitoring solutions for the flue gas desulphurisation areas
- Industrial monitoring solutions for the de-NOx plants areas
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for NOx emissions
Stack Emissions Equipment Supplied In Finland
57 equipment items found
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
Manufactured by:Sintrol Oy based inHelsinki, FINLAND
The S305QAL stack emissions dust monitor meets the highest European standards as defined in EN14181. The S305QAL is approved for and is suitable for use on waste incineration and all combustion plant applications. The S305QAL1 comes with many key features making it a very reliable, low maintenance, sensitive and robust solution for stack ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The STACKFLOW 200 uses the well established Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be verified automatically or manually on demand by the ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a very competitive price. Designed for use primarily ...
Manufactured by:Codel - a Forbes Marshall company based inBakewell, UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been utilised to produce this advanced technology gas ...
Manufactured by:Sintrol Oy based inHelsinki, FINLAND
TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications. The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial applications around the ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
Manufactured by:Pegasor Oy (Ltd) based inTampere, FINLAND
PPS-M is your optimal tool for industrial fine particle monitoring in various environments: Engine and aftertreatment development. Testing labs and portable emission monitoring devices. Stack emission monitoring. Outdoor and indoor air quality ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
It is being manufactured since 1974 and is thevery first heated THC analyzer ever built using a permanent back purge sample filter. It is still the mostly liked heated FID throughout the stack testing community and best known for its legendary ruggedness, forgiveness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The Model 109A is a Heated Non Methane Hydrocarbon FID Analyzer thousandfold used throughout industrial environmental and stack emissions applications as well in ambient air and indoor air concentration measurements. Manufactured since 1989 this analyzer this heated dual FID analyzer continuously and simultaneously measures the Methane, Total Hydrocarbon and Non ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
Manufactured by:Ecomation Oy based inSalo, FINLAND
WEEE includes a long list of harmful chemicals, such as mercury, lead, brominated flame retardants etc. The most common way to separate the valuable metals for recycling is mechanical recycling or by capturing valuable metals by chemical dissolvement. What is often foreseen is that most of the electronic waste is plastics. Therefore, the approach is to take care of the full mass of the waste and ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process, stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The Model 3-700 complements an FTIR analyzer with full ...
Manufactured by:Ecomation Oy based inSalo, FINLAND
Ecomation’s process lines reverse through its dry distillation process waste plastics and rubber into valuable raw ...
Manufactured by:Ecomation Oy based inSalo, FINLAND
The process is naturally capable of efficiently turning organic waste and biomaterials into fuels, Biogas and Biochar and liquid products like wood vinegar. The process can be used for CO2 binding biochar production or for processing of for example sludge from water treatment plants. Sludge left over includes medical and microplastics that we do not want to be spread on our fields and into our ...