Refine by
Eddy Current Testing Equipment Supplied In Germany
18 equipment items found
Manufactured by:Institut Dr. Foerster GmbH & Co. KG based inReutlingen, GERMANY
Fully digital and fitted with innovative operating software, this system with unequalled specifications combines the latest technology for non-destructive eddy current testing of tubes, rods, and wires. Experience the eddy current technology of the future ...
Manufactured by:ibg Prüfcomputer GmbH based inEbermannstadt, GERMANY
The eddyliner S is a digital eddy current test instrument designed for one-channel nondestructive testing of metal components, mass-produced parts, and semi-finished products utilizing Preventive Multi-Frequency Technology (PMFT). It examines material properties such as hardness, case depth, microstructure, tensile strength, heat ...
Manufactured by:InnetiQs GmbH based inStutensee, GERMANY
MagControl technology is an advanced variant of eddy current testing, commonly used in the aerospace and automotive industries, and capable of detecting surface and volume defects in metallic components, including thicker ferritic steel and coated materials. This technique combines direct and alternating current magnetic fields ...
Manufactured by:PRÜFTECHNIK Dieter Busch AG based inIsmaning, GERMANY
Up to ten completely independent test channels and the patented, fully digital signal processing of the new EDDYCHEK 610 ensure the flexibility required for mastering future test requirements. Thanks to the modular architecture with up to 6 freely configurable eddy current modules and a generous number of freely configurable ...
Manufactured by:Institut Dr. Foerster GmbH & Co. KG based inReutlingen, GERMANY
With the CIRCOGRAPH DA, FOERSTER sets new standards in non-destructive eddy current testing of long products such as tubes, bars and wires for longitudinally oriented surface defects. CIRCOGRAPH DA offers unsurpassed reproducibility at high test speeds by combining advanced digital electronics with sophisticated system ...
Manufactured by:Institut Dr. Foerster GmbH & Co. KG based inReutlingen, GERMANY
The CIRCOGRAPH DI ensures the same test quality as the CIRCOGRAPH CI with the basic functions, but this system does not have an integrated control computer. Optionally, the CIRCOGRAPH DI can be upgraded with additional functions, such as an archiving. Operation, administration and archiving are carried out via an externally connected control computer. The system ensures a precise inspection ...
Manufactured by:ibg Prüfcomputer GmbH based inEbermannstadt, GERMANY
The Eddyvisor S is a cutting-edge digital eddy current test instrument designed for non-destructive evaluation of mass-produced parts, metal components, and semi-finished products. Capable of determining material properties such as hardness, case depth, structure, tensile strength, heat treatment condition, or alloy composition, the Eddyvisor S ...
Manufactured by:Rohmann GmbH based inFrankenthal, GERMANY
Regions of maximum stresses, e.g. the bead seat radius and the bore holes, are of special interest. Using a modern eddy current testing instrument, the surface as well as the volume of the wheel rims is inspected by both, a high frequency and a low frequency probe simultaneously. ...
Manufactured by:Rohmann GmbH based inFrankenthal, GERMANY
Regions of maximum stresses, e.g. the bead seat radius and the bore holes, are of special interest. Using a modern eddy current testing instrument, the surface as well as the volume of the wheel rims is inspected by both, a high frequency and a low frequency probe simultaneously. ...
Manufactured by:ibg Prüfcomputer GmbH based inEbermannstadt, GERMANY
The eddyvisor C is a sophisticated digital eddy current test instrument designed for the non-destructive testing of metal components. It employs ibg's innovative Preventive Multi-Filter Technology (PMFT) for detecting cracks, pores, grinder burn, and for assessing material properties like hardness, case depth, microstructure, ...
Manufactured by:Institut Dr. Foerster GmbH & Co. KG based inReutlingen, GERMANY
Meaningful images provide more information. The newly developed DEFECTOVIEW HS system is always used in combination with the well-known DEFECTOMAT DA and the corresponding DEFECTOTHERM coils. It enhances the abstract eddy current signals of the detected material defects with easy-to-interpret images. Triggered by the defect signals from the eddy current sensor, images of the defective wire ...
Manufactured by:PRÜFTECHNIK Dieter Busch AG based inIsmaning, GERMANY
As a producer of black or bright metal bars, you are confronted with customer demands for high quality products – and for good reason, since semi-finished products are often used in safety critical parts for public transport, automobiles, construction, ...
Manufactured by:Rohmann GmbH based inFrankenthal, GERMANY
The inspection of aircraft engines imposes high requirements on the probes used for the test, e.g. regarding sensitivity and resolution. Additionally, due to the complex geometry and small dimensional tolerances of the engine components, a high positioning accuracy and a high repeatability of the guiding system is needed. So, with regard to the existing variety of different engine types, it is ...
Manufactured by:Rohmann GmbH based inFrankenthal, GERMANY
During steel production occasionally local hardening may occur on the surfaces of semi-finished products (e.g. heavy plates). In the further processing and later use of the finished products (e.g. longitudinal seam-welded tubes), this hardening (also called as "hard spots") can cause problems or lead to component failure. Thus relevant specifications increasingly require an in-process hardness ...
Manufactured by:Provita Medical Gmbh & Co. Kg based inWermelskirchen, GERMANY
Provita IV-Rods and Stands are employed in numerous of doctor practices as well as the intensive and normal care. In order to satisfy all demands in a hospital as well as daily normal care, Provita offers for every application area, an individual and perfect drip stand solution. Hereby also contributing with an essential and extensive accessory ...
Manufactured by:GPP Chemnitz Gesellschaft für Prozeßrechnerprogrammierung mbH based inChemnitz, GERMANY
Over 20 years of experience in the development of test technologies – customer-oriented and innovative – are used in the GPP testing and sorting machines. Manufacturers of various fasteners and precision parts, of metallic or non-metallic material, for different industries, are users of these sorting machines for 100% inspection. The testing and sorting machines work with the proven ...
Manufactured by:Provita Medical Gmbh & Co. Kg based inWermelskirchen, GERMANY
Provita IV-Rods and Stands are employed in numerous of doctor practices as well as the intensive and normal care. In order to satisfy all demands in a hospital as well as daily normal care, Provita offers for every application area, an individual and perfect drip stand solution. Hereby also contributing with an essential and extensive accessory ...
Manufactured by:Nordinkraft Ag based inRemchingen, GERMANY
NORDISCAN-BB systems are intended for examination of bars, billets, and other more complex profiles. Depending on the testing task, we apply two basic configurations of NORDISCAN-BB: For examination of bars of small diameters, billets, profiles, and rail we are applying a “pass-through” configuration based on providing a dedicated immersion tank with the probes submerged in it. ...