Refine by
Float Switch Controller Equipment Supplied In Germany
7 equipment items found
Manufactured by:LIQUI Filter GmbH based inEngen, GERMANY
The depositing of contaminants on the filter fabric produces a filter cake which causes the liquid level in the trough filter to rise. A floating switch controls the movement of the filter fabric when the filter trough is full. Therefore, the filter fabric feed is automatic depending on the quantity and permeability of the filter ...
Manufactured by:HOMA Pumps based inNeunkirchen-Seelscheid, GERMANY
The installation of conventional sewer systems in areas of low population like small villages, farms or under difficult topographic conditions is often extremely expensive, mainly because of the high cost for large diameter pipework installation. HOMA provides the perfect, economical alternative with Barracuda grinder pump pressure sewage systems. The Barracuda pumps cut all solids present in the ...
Manufactured by:Jung Pumpen GmbH based inSteinhagen, GERMANY
Condensate removal from gas and oil condensing boilers, air conditioning systems, air dehumidifiers and cooling units. The K2 plus satisfies the highest requirements. It is distinguished not only by its modern design but above all by its consistently quiet operation, its compact tank dimensions and its reliability. The pump is ready to connect and operates fully ...
Manufactured by:HOMA Pumps based inNeunkirchen-Seelscheid, GERMANY
Cast iron submersible pumps with single channel or vortex impeller.. Spherical clearance: 50 - 65 mm. Discharge size: G3. Max. head: 7,5 - 30,0 m. Max. flow: 28,8 - 82,0 m³/h. Motor power P1: 1,0 - 5,2 kW. Motor power P2: 0,8 - 4,4 ...
Manufactured by:HOMA Pumps based inNeunkirchen-Seelscheid, GERMANY
Cast iron submersible pumps with single channel or vortex impeller. Spherical clearance: 50 - 65 mm. Discharge size: G2 1/2. Max. head: 7,5 - 31,6 m. Max. flow: 28,8 - 72,9 m³/h. Motor power P1: 1,0 - 5,2 kW. Motor power P2: 1,0 - 4,4 ...
Manufactured by:HOMA Pumps based inNeunkirchen-Seelscheid, GERMANY
For irrigation and drainage in clear or drainage water. Cellar drainage, pumping water from sumps, pits and rooms. Also suitable for pumping discharge from hand basins, showers and washing machines, for flood relief and water removal from water courses or reservoirs. 10 m connecting cable permits the mobile outdoor use and an immersion depth of 7 m. Cooling jacket ensures optimum motor cooling ...
Manufactured by:HOMA Pumps based inNeunkirchen-Seelscheid, GERMANY
Cast iron submersible pumps with cutter system for pressure sewage systems. Discharge size: G2 / DN50. Max. head: 20,4 - 52,0 m. Max. flow: 11,7 - 27,7 m³/h. Motor power P1: 1,3 - 5,2 kW. Motor power P2: 0,9 - 4,4 ...