Show results for
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Air pollution, emission and process monitoring systems for leakage detection
- Air pollution, emission and process monitoring systems for odor detection
- Nano-analytical microscope systems solutions for materials science sector
- Nano-analytical microscope systems solutions for semiconductors & photovoltaics sector
- Asphalt production - monitoring solutions for process optimization & energy saving
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
Microsensor Equipment Supplied In Germany
86 equipment items found
Manufactured by:Surflay Nanotec GmbH based inBerlin, GERMANY
Surflay's microsensors are modified microparticles, which can quantify various parameters such as: pH; Temperature; Oxygen amount; biomolecular interactions (via WhisperSense ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Needle-type oxygen microsensors are miniaturized chemical optical oxygen sensors designed for all research and packaging applications where a small tip size (< 50 µm) and fast response time (t90 < 1s) are necessary. The optical oxygen microsensors are based on a 140 µm silica fiber and are available with two different sensor tip diameters, a ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The tiny probe has a tip size of < 50 µm (TS) to 140 µm (TF) while the outer diameter ranges from 140 µm to 900 µm. The microsensor tip is not mounted in any additional housing. The bare glass fiber tip can be mounted to your own housings, steel tubes and micro respirometer chambers etc. The small outer diameter even allows insertion into implantable ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
Needle-type oxygen microsensors are perfectly suited for measuring oxygen distribution profiles in sediment and biofilms with a high spatial resolution of less than 50 µm. The oxygen-sensitive tip of an optical fiber is protected inside a stainless steel needle. ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Cairnet® device is a real-time standalone and networkable air-monitoring station including up to six Cairsens® microsensors. It is powered by solar panels and offers cellular communication. Thanks to its integrated manifold allowing a dynamic sampling, the measures are accurate and reliable. Electronic compounds are sealed & protected from moisture and corrosive ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Cairnet device is a real-time standalone and networkable air-monitoring station including up to six Cairsens microsensors. It is powered by solar panels and offers cellular communication. Thanks to its integrated manifold allowing a dynamic sampling, the measures are accurate and reliable. Electronic compounds are sealed & protected from moisture and corrosive ambient ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
With the CPA PRO crimp force monitoring, a quick and accurate check of the performance of fully automatic wire processing machines is carried out– without an additional PC. The CPA PRO is a convenient, portable device that is universally used for testing crimping machines. A real-time graphic display shows the CPK index and standard deviation for shut height and crimp force. This ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The MDM290 differential pressure sensor is piezoresistive and oil-filled type, isolated by a stainless steel corrugated diaphragm. As differential pressure sensor suppliers, Micro Sensor's pressure-sensitive components are assembled on advanced production lines, automatically tested and compensated by computer. The high and low-voltage ends are protected by isolation diaphragms. Both pressure ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The diaphragm pressure transducer can measure the maximum low pressure differential value of 20bar. MDM491 connector type supports external adjustment of zero point and full scale. MicroSensor's temperature compensation and aging screening processes ensure the stable performance of differential pressure ...
Manufactured by:PreSens Precison Sensing GmbH based inRegensburg, GERMANY
The Microx 4 is a completely stand-alone, portable fiber optic oxygen meter. It can be used with non-invasive sensors & probes (1 mm fiber), and oxygen microsensors (200 µm fiber) in different designs. This oxygen meter is compatible with the wide range of sensors type PSt7 (detection limit 15 ppb, 0 – 100 % oxygen). With its integrated barcode reader the Microx ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
ENVEA plays a pioneering role in air quality monitoring and puts environment protection at the heart of its strategy. The group is therefore committed to manufacture sustainable solutions and to recycling old Cairsens® micro-sensors. In that respect, a renewal program including recycling is available for Cairsens®. The objective is to guarantee a reliable metrology throughout the process ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
MDM492 differential pressure transmitter is specially used for measuring very low pressure in boiler, vintage and engine applications (gas or non-conductive liquid). It is based on piezoresistive measurement principle and has 3 main pressure ranges, but within these ranges, others could be also achieved by enlarging or shrinking standard pressure range (overpressure unavailable). Combined with a ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The sensing element of MDM490 is a diffused silicon piezoresistive differential pressure sensor with a stainless steel 316L isolation diaphragm. The reliable performance of the DP sensor is due to temperature compensation and aging screening. It enables zero and full scale to be adjusted externally. MDM490 has obtained CE and RoHS certifications.MDM490 DP transmitter is used for various gas and ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The MPM281 series offers a high-stable piezoresistive pressure sensor tailored for precision measurements across various industrial and medical fields. This OEM pressure element features a robust 316L stainless steel construction, ensuring durability in harsh environments. Utilizing advanced diffused silicon technology, the sensor provides exceptional sensitivity and enables precise ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The MPM489 ATEX Explosion-Proof Pressure Transmitter is engineered for robust performance in various industrial environments. It integrates piezoresistive pressure sensor technology to ensure precise linearity, repeatability, and hysteresis. The transmitter is enclosed in a high-strength stainless steel housing, offering excellent resistance against EMI and protection against transient ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The MDM390 differential pressure transducer is manufactured in an all-welded housing with G1/4 female threads. The static pressure transmitter is OEM type with max. static pressure 200bar. MDM390 is cable-connected and supplied with a constant-current power supply. It offers small size, precise performance, all-solid-state insulation, and high stability, reliability, and accuracy. The vacuum ...
Manufactured by:DMEGC Germany GmbH based inOffenbach am Main, GERMANY
Mainly used in home appliances, communications, automotive micro -motors, fan motors, sensors, ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
The MPM430 low range pressure transmitter is designed for low pressure measurements. The low pressure sensor offers two pressure port configurations to choose from, general and non-cavity, with a large contact area between the sensing diaphragm and the medium. The low pressure transducer adopts high-performance ceramic pressure sensor and fully sealed stainless steel structure. Compact size and ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
MDM4901FL differential pressure transmitter is designed for oxygen pressure measurement. MDM4901FL gas pressure transducer is filled with fluorine oil inside. After being cleaned through a special process, the product meets the conditions of oxygen measurement and oil-free body. High accuracy and high stability cryogenic pressure transducer for oxygen measurement solves the problem of measuring ...
Manufactured by:Micro Sensor Co., Ltd. based inBaoji, CHINA
MDM293 Differential Pressure Sensor is an OEM sensing element with a stainless steel isolated diaphragm. The differential pressure being measured is transferred to the silicon pressure sensor via the isolation diaphragm and the silicone oil filling, ensuring precise differential pressure measurement. This air pressure sensor is small in size, strong in hydrostatic pressure resistance, high in ...